UEFI specification 2.8 errata B introduced the EFI_RT_PROPERTIES_TABLE
describing the services available at runtime.
The lsefisystab command is used to display installed EFI configuration
tables. Currently it only shows the GUID but not a short text for the
new table.
Provide a short text for the EFI_RT_PROPERTIES_TABLE_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_printf_fmt_check() function parses the arguments of an untrusted
printf() format and an expected printf() format and then compares the
arguments counts and arguments types. The arguments count in the untrusted
format string must be less or equal to the arguments count in the expected
format string and both arguments types must match.
To do this the parse_printf_arg_fmt() helper function is extended in the
following way:
1. Add a return value to report errors to the grub_printf_fmt_check().
2. Add the fmt_check argument to enable stricter format verification:
- the function expects that arguments definitions are always
terminated by a supported conversion specifier.
- positional parameters, "$", are not allowed, as they cannot be
validated correctly with the current implementation. For example
"%s%1$d" would assign the first args entry twice while leaving the
second one unchanged.
- Return an error if preallocated space in args is too small and
allocation fails for the needed size. The grub_printf_fmt_check()
should verify all arguments. So, if validation is not possible for
any reason it should return an error.
This also adds a case entry to handle "%%", which is the escape
sequence to print "%" character.
3. Add the max_args argument to check for the maximum allowed arguments
count in a printf() string. This should be set to the arguments count
of the expected format. Then the parse_printf_arg_fmt() function will
return an error if the arguments count is exceeded.
The two additional arguments allow us to use parse_printf_arg_fmt() in
printf() and grub_printf_fmt_check() calls.
When parse_printf_arg_fmt() is used by grub_printf_fmt_check() the
function parse user provided untrusted format string too. So, in
that case it is better to be too strict than too lenient.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit 32ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled) reintroduced CVE-2020-15705 which
previously only existed in the out-of-tree linuxefi patches and was
fixed as part of the BootHole patch series.
Under Secure Boot enforce loading shim_lock verifier. Allow skipping
shim_lock verifier if SecureBoot/MokSBState EFI variables indicate
skipping validations, or if GRUB image is built with --disable-shim-lock.
Fixes: 132ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled)
Fixes: CVE-2020-15705
Fixes: CVE-2021-3418
Reported-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a --sbat option to the grub-mkimage tool which allows us to import
an SBAT metadata formatted as a CSV file into a .sbat section of the
EFI binary.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It works only on UEFI platforms but can be quite easily extended to
others architectures and platforms if needed.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Add a new variable sized heap buffer type (grub_buffer_t) with simple
operations for appending data, accessing the data and maintaining
a read cursor.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Valgrind identified the following use of uninitialized data:
==2782220== Conditional jump or move depends on uninitialised value(s)
==2782220== at 0x42B364: grub_hfsplus_btree_search (hfsplus.c:566)
==2782220== by 0x42B21D: grub_hfsplus_read_block (hfsplus.c:185)
==2782220== by 0x42A693: grub_fshelp_read_file (fshelp.c:386)
==2782220== by 0x42C598: grub_hfsplus_read_file (hfsplus.c:219)
==2782220== by 0x42C598: grub_hfsplus_mount (hfsplus.c:330)
==2782220== by 0x42B8C5: grub_hfsplus_dir (hfsplus.c:958)
==2782220== by 0x4C1AE6: grub_fs_probe (fs.c:73)
==2782220== by 0x407C94: grub_ls_list_files (ls.c:186)
==2782220== by 0x407C94: grub_cmd_ls (ls.c:284)
==2782220== by 0x4D7130: grub_extcmd_dispatcher (extcmd.c:55)
==2782220== by 0x4045A6: execute_command (grub-fstest.c:59)
==2782220== by 0x4045A6: fstest (grub-fstest.c:433)
==2782220== by 0x4045A6: main (grub-fstest.c:772)
==2782220== Uninitialised value was created by a heap allocation
==2782220== at 0x483C7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==2782220== by 0x4C0305: grub_malloc (mm.c:42)
==2782220== by 0x42C21D: grub_hfsplus_mount (hfsplus.c:239)
==2782220== by 0x42B8C5: grub_hfsplus_dir (hfsplus.c:958)
==2782220== by 0x4C1AE6: grub_fs_probe (fs.c:73)
==2782220== by 0x407C94: grub_ls_list_files (ls.c:186)
==2782220== by 0x407C94: grub_cmd_ls (ls.c:284)
==2782220== by 0x4D7130: grub_extcmd_dispatcher (extcmd.c:55)
==2782220== by 0x4045A6: execute_command (grub-fstest.c:59)
==2782220== by 0x4045A6: fstest (grub-fstest.c:433)
==2782220== by 0x4045A6: main (grub-fstest.c:772)
This happens when the process of reading the catalog file goes sufficiently
wrong that there's an attempt to read the extent overflow file, which has
not yet been loaded. Keep track of when the extent overflow file is
fully loaded and refuse to use it before then.
The load valgrind doesn't like is btree->nodesize, and that's then used
to allocate a data structure. It looks like there are subsequently a lot
of reads based on that pointer so OOB reads are likely, and indeed crashes
(albeit difficult-to-replicate ones) have been observed in fuzzing.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The maximum number of configurations and interfaces are fixed but there is
no out-of-bound checking to prevent a malicious USB device to report large
values for these and cause accesses outside the arrays' memory.
Fixes: CVE-2020-25647
Reported-by: Joseph Tartaro <joseph.tartaro@ioactive.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When a module is attempted to be removed its reference counter is always
decremented. This means that repeated rmmod invocations will cause the
module to be unloaded even if another module depends on it.
This may lead to a use-after-free scenario allowing an attacker to execute
arbitrary code and by-pass the UEFI Secure Boot protection.
While being there, add the extern keyword to some function declarations in
that header file.
Fixes: CVE-2020-25632
Reported-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When the GRUB starts on a secure boot platform, some commands can be
used to subvert the protections provided by the verification mechanism and
could lead to booting untrusted system.
To prevent that situation, allow GRUB to be locked down. That way the code
may check if GRUB has been locked down and further restrict the commands
that are registered or what subset of their functionality could be used.
The lockdown support adds the following components:
* The grub_lockdown() function which can be used to lockdown GRUB if,
e.g., UEFI Secure Boot is enabled.
* The grub_is_lockdown() function which can be used to check if the GRUB
was locked down.
* A verifier that flags OS kernels, the GRUB modules, Device Trees and ACPI
tables as GRUB_VERIFY_FLAGS_DEFER_AUTH to defer verification to other
verifiers. These files are only successfully verified if another registered
verifier returns success. Otherwise, the whole verification process fails.
For example, PE/COFF binaries verification can be done by the shim_lock
verifier which validates the signatures using the shim_lock protocol.
However, the verification is not deferred directly to the shim_lock verifier.
The shim_lock verifier is hooked into the verification process instead.
* A set of grub_{command,extcmd}_lockdown functions that can be used by
code registering command handlers, to only register unsafe commands if
the GRUB has not been locked down.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move the shim_lock verifier from its own module into the core image. The
Secure Boot lockdown mechanism has the intent to prevent the load of any
unsigned code or binary when Secure Boot is enabled.
The reason is that GRUB must be able to prevent executing untrusted code
if UEFI Secure Boot is enabled, without depending on external modules.
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move verifiers API from a module to the kernel image, so it can be
used there as well. There are no functional changes in this patch.
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch is similar to commit 9dab2f51e (sparc: Enable __clzsi2() and
__clzdi2()) but for MIPS target and __clzdi2() only, __clzsi2() was
already enabled.
Suggested-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Do some sanity checking on data coming from the LUKS2 header. If segment.size
is "dynamic", verify that the offset is not past the end of disk. Otherwise,
check for errors from grub_strtoull() when converting segment size from
string. If a GRUB_ERR_BAD_NUMBER error was returned, then the string was
not a valid parsable number, so skip the key. If GRUB_ERR_OUT_OF_RANGE was
returned, then there was an overflow in converting to a 64-bit unsigned
integer. So this could be a very large disk (perhaps large RAID array).
In this case skip the key too. Additionally, enforce some other limits
and fail if needed.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
By default, dm-crypt internally uses an IV that corresponds to 512-byte
sectors, even when a larger sector size is specified. What this means is
that when using a larger sector size, the IV is incremented every sector.
However, the amount the IV is incremented is the number of 512 byte blocks
in a sector (i.e. 8 for 4K sectors). Confusingly the IV does not correspond
to the number of, for example, 4K sectors. So each 512 byte cipher block in
a sector will be encrypted with the same IV and the IV will be incremented
afterwards by the number of 512 byte cipher blocks in the sector.
There are some encryption utilities which do it the intuitive way and have
the IV equal to the sector number regardless of sector size (ie. the fifth
sector would have an IV of 4 for each cipher block). And this is supported
by dm-crypt with the iv_large_sectors option and also cryptsetup as of 2.3.3
with the --iv-large-sectors, though not with LUKS headers (only with --type
plain). However, support for this has not been included as grub does not
support plain devices right now.
One gotcha here is that the encrypted split keys are encrypted with a hard-
coded 512-byte sector size. So even if your data is encrypted with 4K sector
sizes, the split key encrypted area must be decrypted with a block size of
512 (ie the IV increments every 512 bytes). This made these changes less
aesthetically pleasing than desired.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add GRUB_TYPE_U_MAX/MIN(type) macros to get the max/min values for an
unsigned number with size of type.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The new macro GRUB_TYPE_BITS(type) returns the number of bits
allocated for type.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This ensures that expected order of operations is preserved when arguments
are expressions.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The function grub_disk_get_size() is confusingly named because it actually
returns a sector count where the sectors are sized in the GRUB native sector
size. Rename to something more appropriate.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There is a hardcoded maximum disk size that can be read or written from,
currently set at 1 EiB in grub_disk_adjust_range(). Move the literal into a
macro in disk.h, so our assumptions are more visible. This hard coded limit
does not prevent using larger disks, just GRUB won't read/write past the
limit. The comment accompanying this restriction didn't quite make sense to
me, so its been modified too.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We don't want to support small MBR gap in pair with anything but the
simplest config of biosdisk + part_msdos + simple filesystem. In this
path "simple filesystems" are all current filesystems except ZFS and
Btrfs.
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that the GRUB has a grub_efi_get_secureboot() function to check the
UEFI Secure Boot status, use it to report that to the Linux kernel.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Introduce grub_efi_get_secureboot() function which returns whether
UEFI Secure Boot is enabled or not on UEFI systems.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It will be used to properly detect and report UEFI Secure Boot status to
the x86 Linux kernel. The functionality will be added by subsequent patches.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is needed to properly detect and report UEFI Secure Boot status
to the x86 Linux kernel. The functionality will be added by subsequent
patches.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GUID will be used to properly detect and report UEFI Secure Boot
status to the x86 Linux kernel. The functionality will be added by
subsequent patches. The shim_lock protocol type is made public for
completeness.
Additionally, fix formatting of four preceding GUIDs.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This header uses types defined in <grub/types.h> but does not include it,
which leads to compile errors like the following:
In file included from ../include/grub/cpu/linux.h:19,
from kern/efi/sb.c:21:
../include/grub/i386/linux.h:80:3: error: unknown type name ‘grub_uint64_t’
80 | grub_uint64_t addr;
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This makes it clear that the offset represents sectors, not bytes, in
order to improve readability.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This creates an alignment with grub_disk_t naming of the same field and is
more intuitive as to how it should be used.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This header uses types defined in <grub/types.h> but does not include it,
which leads to compile errors like the following:
../include/grub/cpu/linux.h:27:3: error: unknown type name ‘grub_uint32_t’
27 | grub_uint32_t code0; /* Executable code */
| ^~~~~~~~~~~~~
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The header uses the EXPORT_FUNC() macro defined in <grub/types.h> but
doesn't include it, which leads to the following compile error on arm:
../include/grub/cpu/system.h:12:13: error: ‘EXPORT_FUNC’ declared as function returning a function
12 | extern void EXPORT_FUNC(grub_arm_disable_caches_mmu) (void);
| ^~~~~~~~~~~
../include/grub/cpu/system.h:12:1: warning: parameter names (without types) in function declaration
12 | extern void EXPORT_FUNC(grub_arm_disable_caches_mmu) (void);
| ^~~~~~
make[3]: *** [Makefile:36581: kern/efi/kernel_exec-sb.o] Error 1
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This was probably added by accident when originally creating the file.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Although the tpm_execute() series of functions are defined they are not
used anywhere. Several structures in the include/grub/efi/tpm.h header
file are not used too. There is even nonexistent grub_tpm_init()
declaration in this header. Delete all that unneeded stuff.
If somebody needs the functionality implemented in the dropped code then
he/she can re-add it later. Now it needlessly increases the GRUB
code/image size.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Rename get_active_pcr_blanks() to get_active_pcr_banks().
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Here dev is a grub_cryptodisk_t and dev->offset is offset in sectors of size
native to the cryptodisk device. The sector is correctly transformed into
native grub sector size, but then added to dev->offset which is not
transformed. It would be nice if the type system would help us with this.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
commit 92bfc33db984 ("efi: Free malloc regions on exit")
introduced memory freeing in grub_efi_fini(), which is
used not only by exit path but by halt/reboot one as well.
As result of memory freeing, code and data regions used by
modules, such as halt, reboot, acpi (used by halt) also got
freed. After return to module code, CPU executes, filled
by UEFI firmware (tested with edk2), 0xAFAFAFAF pattern as
a code. Which leads to #UD exception later.
grub> halt
!!!! X64 Exception Type - 06(#UD - Invalid Opcode) CPU Apic ID - 00000000 !!!!
RIP - 0000000003F4EC28, CS - 0000000000000038, RFLAGS - 0000000000200246
RAX - 0000000000000000, RCX - 00000000061DA188, RDX - 0A74C0854DC35D41
RBX - 0000000003E10E08, RSP - 0000000007F0F860, RBP - 0000000000000000
RSI - 00000000064DB768, RDI - 000000000832C5C3
R8 - 0000000000000002, R9 - 0000000000000000, R10 - 00000000061E2E52
R11 - 0000000000000020, R12 - 0000000003EE5C1F, R13 - 00000000061E0FF4
R14 - 0000000003E10D80, R15 - 00000000061E2F60
DS - 0000000000000030, ES - 0000000000000030, FS - 0000000000000030
GS - 0000000000000030, SS - 0000000000000030
CR0 - 0000000080010033, CR2 - 0000000000000000, CR3 - 0000000007C01000
CR4 - 0000000000000668, CR8 - 0000000000000000
DR0 - 0000000000000000, DR1 - 0000000000000000, DR2 - 0000000000000000
DR3 - 0000000000000000, DR6 - 00000000FFFF0FF0, DR7 - 0000000000000400
GDTR - 00000000079EEA98 0000000000000047, LDTR - 0000000000000000
IDTR - 0000000007598018 0000000000000FFF, TR - 0000000000000000
FXSAVE_STATE - 0000000007F0F4C0
Proposal here is to continue to free allocated memory for
exit boot services path but keep it for halt/reboot path
as it won't be much security concern here.
Introduced GRUB_LOADER_FLAG_EFI_KEEP_ALLOCATED_MEMORY
loader flag to be used by efi halt/reboot path.
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Several places we take the length of a device path and subtract 4 from
it, without ever checking that it's >= 4. There are also cases where
this kind of malformation will result in unpredictable iteration,
including treating the length from one dp node as the type in the next
node. These are all errors, no matter where the data comes from.
This patch adds a checking macro, GRUB_EFI_DEVICE_PATH_VALID(), which
can be used in several places, and makes GRUB_EFI_NEXT_DEVICE_PATH()
return NULL and GRUB_EFI_END_ENTIRE_DEVICE_PATH() evaluate as true when
the length is too small. Additionally, it makes several places in the
code check for and return errors in these cases.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Defining a new function with the same name as a previously defined
function causes the grub_script and associated resources for the
previous function to be freed. If the previous function is currently
executing when a function with the same name is defined, this results
in use-after-frees when processing subsequent commands in the original
function.
Instead, reject a new function definition if it has the same name as
a previously defined function, and that function is currently being
executed. Although a behavioural change, this should be backwards
compatible with existing configurations because they can't be
dependent on the current behaviour without being broken.
Fixes: CVE-2020-15706
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This commit introduces integer underflow mitigation in max_addr calculation
in grub_relocator_alloc_chunk_align() invocation.
It consists of 2 fixes:
1. Introduced grub_relocator_alloc_chunk_align_safe() wrapper function to perform
sanity check for min/max and size values, and to make safe invocation of
grub_relocator_alloc_chunk_align() with validated max_addr value. Replace all
invocations such as grub_relocator_alloc_chunk_align(..., min_addr, max_addr - size, size, ...)
by grub_relocator_alloc_chunk_align_safe(..., min_addr, max_addr, size, ...).
2. Introduced UP_TO_TOP32(s) macro for the cases where max_addr is 32-bit top
address (0xffffffff - size + 1) or similar.
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This modifies most of the places we do some form of:
X = malloc(Y * Z);
to use calloc(Y, Z) instead.
Among other issues, this fixes:
- allocation of integer overflow in grub_png_decode_image_header()
reported by Chris Coulson,
- allocation of integer overflow in luks_recover_key()
reported by Chris Coulson,
- allocation of integer overflow in grub_lvm_detect()
reported by Chris Coulson.
Fixes: CVE-2020-14308
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This tries to make sure that everywhere in this source tree, we always have
an appropriate version of calloc() (i.e. grub_calloc(), xcalloc(), etc.)
available, and that they all safely check for overflow and return NULL when
it would occur.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds a new header, include/grub/safemath.h, that includes easy to
use wrappers for __builtin_{add,sub,mul}_overflow() declared like:
bool OP(a, b, res)
where OP is grub_add, grub_sub or grub_mul. OP() returns true in the
case where the operation would overflow and res is not modified.
Otherwise, false is returned and the operation is executed.
These arithmetic primitives require newer compiler versions. So, bump
these requirements in the INSTALL file too.
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_tpm_log_event() and grub_tpm_measure() are two functions that
have the same effect. So, keep grub_tpm_log_event() and rename it
to grub_tpm_measure(). This way we get also a more clear semantics.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On some devices the ESC key is the hotkey to enter the BIOS/EFI setup
screen, making it really hard to time pressing it right. Besides that
ESC is also pretty hard to discover for a user who does not know it
will unhide the menu.
This commit makes F4, which was chosen because is not used as a hotkey
to enter the BIOS setup by any vendor, also interrupt sleeps / stop the
menu countdown.
This solves the ESC gets into the BIOS setup and also somewhat solves
the discoverability issue, but leaves the timing issue unresolved.
This commit fixes the timing issue by also adding support for keeping
SHIFT pressed during boot to stop the menu countdown. This matches
what Ubuntu is doing, which should also help with discoverability.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If we're running with a hidden menu we may never need text mode, so do not
change the video-mode to text until we actually need it.
This allows to boot a machine without unnecessary graphical transitions and
provide a seamless boot experience to users.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
