When using userland drivers such as rumpdisk, we'd rather make ext2fs use
parted-based libstore partitioning support. That can be used for kernelland
drivers as well, so we can just make GRUB always use the "part:" qualifier
to switch ext2fs to it.
grub_util_find_hurd_root_device() then has to understand this syntax and
translate it into the /dev/ entry name.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add the options --key-file, --keyfile-offset, and --keyfile-size to
cryptomount and code to put read the requested key file data and pass
via the cargs struct. Note, key file data is for all intents and purposes
equivalent to a password given to cryptomount. So there is no need to
enable support for key files in the various crypto backends (e.g. LUKS1)
because the key data is passed just as if it were a password.
Signed-off-by: John Lane <john@lane.uk.net>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The partmap test requires no elevated privileges. However, it uses parted
which can be used as a normal user, but is usually located in /sbin or
/usr/bin (eg. on Debian systems). Whereas the normal user does not usually
have /sbin or /usr/sbin added to their path, thus parted will not be found
causing the test to abort. Add /sbin and /usr/sbin to the path for the
partmap test so that the test can run successfully as an unprivileged user.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On failure, the hfs test should show both the host and GRUB determined fs
UUID. Prior to this change, both outputs where generated by GRUB, which is
less helpful in determining the cause of failure.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The section is an itemized list of commands that are not listed else where
in the command sections.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move loader commands documented in the general commands list into the
loader command section.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Also, add period to terminate sentence.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The --no-apm option is only available on the i396-pc target.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit 848724273e4 (net/net: Avoid unnecessary calls to
grub_net_tcp_retransmit()) needs to have its condition inverted to avoid
unnecessary calls to grub_net_tcp_retransmit(). As it is, it creates many
unnecessary calls and does not call grub_net_tcp_retransmit() when needed.
The call to grub_net_tcp_retransmit() should only be made when
grub_net_cards does _not_ equal NULL, meaning that there are potentially
network cards that need TCP retransmission.
Fixes: 848724273e4 (net/net: Avoid unnecessary calls to grub_net_tcp_retransmit())
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add detection for initramfs of the form *.img.old. For example, Gentoo's
sys-kernel/genkernel installs it as initramfs-*.img and moves any existing
one to initramfs-*.img.old.
Apply the same scheme to initrd-*.img and initrd-*.gz files for consistency.
Signed-off-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Those are used with non-bootstrap disk drivers, for which libstore has to
open /dev/disk before calling device_open on it instead of on the device
master port. Normally in that case all /dev/ entries also have the @/dev/disk:
qualifier, so we can just drop it.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A recent fix that made appears to have broken the ability to create an
aarch64 boot image on a x86-based host.
This was due to an overzealous testing of the architecture when building
grub-mkimage and removing the code that build an ARM image when not built
on ARM.
On the occasion remove redundant break.
Fixes: 8541f319 (grub-mkimage: Only check aarch64 relocations when built for aarch64)
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Tested-by: Selva Ganesan <selvaganesan89@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Although the EFI specification enforces support for FAT ESP, it's free
for EFI implementations to implement support for ESPs with other formats
(e.g. ext4, ntfs, etc), and at least U-Boot EFI will support ext4 ESP if
U-Boot is built with ext4 support. In some situations a GRUB installation
on such a non-FAT ESP could be useful (e.g. a NTFS-based USB disk that
can dual boot a Windows installation media and a Linux LiveCD).
As this is advanced and implementation-dependent behavior, let grub-install
allow this kind of installation, but only when --force is specified.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
During UEFI PXE boot in IPv6 network, if the DHCP server adopts stateful
automatic configuration, then the client receives a ICMP6_ROUTER_ADVERTISE
multicast message from the server. This may be received without the interface
having a configured network address, so orig_inf will be NULL, which can lead
to a NULL dereference when creating the default route. Actually, in this case,
the client obtains the default route through DHCPv6 instead of RA messages.
So if orig_inf == NULL and route_inf == NULL, we should not set the
default route.
Fixes: https://savannah.gnu.org/bugs/?62072
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
ZFS file systems are not unmounted using umount, but instead by exporting
them. So export the ZFS file system that has the same label as the one that
was created during the test, if such one exists. This is required to delete
the loopback device that uses the ZFS image file. Otherwise the added code
to delete all loopback devices setup during the test run will never be able
to finish because the loopback device can not be deleted while in use.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When all tests complete successfully, filesystems mounted by grub-fs-tester
will be unmounted before exiting. However, on certain test failures the
tester will exit with a failure code and not unmount previously mounted
filesystems. Now keep track of mounts and umounts and run an exit handler
on exit or process interruption that will umount all mounts that haven't
already been unmounted.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using "*" to prefix list items leads to undesirable display output for
at least the generation of the html documentation. Use the @itemize and
@item directives to get itemized list output.
Also fix some wording and punctuation issues.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It is not clear from the documentation what a "list" is in the context
of the "if" command. Note that its a list of simple commands separated
by a ";" and that only the exit status of the last command matters.
The same is true for the "cond" parameter to the "while" command.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Instead of "tmp" the name is prefixed by the name of the scripts (e.g.
grub-fs-tester). A timestamp is added in the name to allow for easily
seeing a chronological sorting of runs and the name of the filesystem
being tested. The random component is set to the minimal possible,
3 characters, because the timestamp should provide enough uniqueness.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using the blkid cache can cause issues when running many file system tests
in parallel. We do not need it, as its only there to improve performance,
and using the cache does not provide significant performance improvements.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Autoconf will set a default CFLAGS of "-g -O2" if CFLAGS is not set.
CFLAGS was defaulted to "" early in configure to prevent this. A recent
commit ad9ccf660 (configure: Fix various new autotools warnings) added
AC_USE_SYSTEM_EXTENSIONS, which pulls in the autoconf CFLAGS check,
before we default CFLAGS and thus setting the autoconf default for
CFLAGS. Move the default setting of CFLAGS to before AC_USE_SYSTEM_EXTENSIONS
so that autoconf will see CFLAGS as set and not give it a default.
CFLAGS is also moved above AC_CONFIG_AUX_DIR, because CFLAGS should be
defaulted to "" as soon as possible to catch any autoconf macros that try
to use some other default. Regardless, this currently has no effect as that
macro does not consider the CFLAGS variable.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The value of next_marker is adjusted based on the word sized value
read from data->file.
The updated next_marker value should reference a location in the file
just beyond the huffman table, and as such should not have a value
larger than the size of the file.
Fixes: CID 73657
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_absolute_pointer() is a compound expression that can only work
within a function. We are out of luck here when the pointer variables
require global definition due to ATTRIBUTE_TEXT that have to use fully
initialized global definition because of the way linkers work.
static gf_single_t * const gf_powx ATTRIBUTE_TEXT = (void *) 0x100000;
For the reason given above, use GCC diagnostic pragmas to suppress the
array-bounds warning.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GRUB is failing to build with GCC-12 in many places like this:
In function 'init_cbfsdisk',
inlined from 'grub_mod_init' at ../../grub-core/fs/cbfs.c:391:3:
../../grub-core/fs/cbfs.c:345:7: error: array subscript 0 is outside array bounds of 'grub_uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds]
345 | ptr = *(grub_uint32_t *) 0xfffffffc;
| ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is caused by GCC regression in 11/12 [1]. In a nut shell, the
warning is about detected invalid accesses at non-zero offsets to NULL
pointers. Since hardwired constant address is treated as NULL plus an
offset in the same underlying code, the warning is therefore triggered.
Instead of inserting #pragma all over the places where literal pointers
are accessed to avoid diagnosing array-bounds, we can try to borrow the
idea from Linux kernel that the absolute_pointer() macro [2][3] is used
to disconnect a pointer using literal address from it's original object,
hence GCC won't be able to make assumptions on the boundary while doing
pointer arithmetic. With that we can greatly reduce the code we have to
cover up by making initial literal pointer assignment to use the new
wrapper but not having to track everywhere literal pointers are
accessed. This also makes code looks cleaner.
Please note the grub_absolute_pointer() macro requires to be invoked in
a function as long as it is compound expression. Some global variables
with literal pointers has been changed to local ones in order to use
grub_absolute_pointer() to initialize it. The shuffling is basically done
in a selective and careful way that the variable's scope doesn't matter
being local or global, for example, the global variable must not get
modified at run time throughout. For the record, here's the list of
global variables got shuffled in this patch:
grub-core/commands/i386/pc/drivemap.c:int13slot
grub-core/term/i386/pc/console.c:bios_data_area
grub-core/term/ns8250.c:serial_hw_io_addr
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
[2] https://elixir.bootlin.com/linux/v5.16.14/source/include/linux/compiler.h#L180
[3] https://elixir.bootlin.com/linux/v5.16.14/source/include/linux/compiler-gcc.h#L31
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The warning is real as long as dangling pointer to tmp_ may be used if
o32 and o64 are both NULL. However that is not going to happen and can
be ignored safely because the PE_OHDR is being used in a context that
either o32 or o64 must have been properly initialized. Sadly compiler
seems not to always optimize that unused tmp_ away so explicit
suppression remain needed here.
../util/mkimage.c: In function 'grub_install_generate_image':
../util/mkimage.c:1422:41: error: dangling pointer to 'tmp_' may be used [-Werror=dangling-pointer=]
1422 | PE_OHDR (o32, o64, header_size) = grub_host_to_target32 (header_size);
../util/mkimage.c:857:28: note: 'tmp_' declared here
857 | __typeof__((o64)->field) tmp_; \
| ^~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch handles automatic configuration of VLAN when booting from PXE
on UEFI hardware.
Signed-off-by: Chad Kimes <chkimes@github.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Previously there was no way to set the 802.1Q VLAN identifier, despite
support for vlantag in the net module. The only location vlantag was
being populated was from PXE boot and only for Open Firmware hardware.
This commit allows users to manually configure VLAN information for any
interface.
Example usage:
grub> net_ls_addr
efinet1 00:11:22:33:44:55 192.0.2.100
grub> net_set_vlan efinet1 100
grub> net_ls_addr
efinet1 00:11:22:33:44:55 192.0.2.100 vlan100
grub> net_set_vlan efinet1 0
efinet1 00:11:22:33:44:55 192.0.2.100
Signed-off-by: Chad Kimes <chkimes@github.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The initial implementation of the stack protector just busy looped
in __stack_chk_fail in order to reduce the amount of code being
executed after the stack has been compromised because of a lack of
firmware memory protections. With future firmware implementations
incorporating memory protections such as W^X, call in to boot services
when an error occurs in order to log a message to the console before
automatically rebooting the machine.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_xnu_boot(), struct grub_relocator32_state state is called
but isn't being initialized. This results in the members grub_uint32_t ebx,
grub_uint32_t ecx, grub_uint32_t edx, grub_uint32_t edi, and grub_uint32_t esi
being filled with junk data from the stack since none of them are being set to
any values. We can prevent this by setting state to {0}.
Fixes: CID 375035
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_xnu_boot_resume(), struct grub_relocator32_state state is
called but isn't being initialized. This results in the members grub_uint32_t
ebx, grub_uint32_t ecx, grub_uint32_t edx, grub_uint32_t esi, and grub_uint32_t
edi being filled with junk data from the stack since none of them are being set
to any values. We can prevent this by setting state to {0}.
Fixes: CID 375031
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_linux16_boot(), struct grub_relocator16_state state is
called but isn't being initialized. This results in the members grub_uint32_t
ebx, grub_uint32_t edx, grub_uint32_t esi, and grub_uint32_t ebp being filled
with junk data from the stack since none of them are being set to any values.
We can prevent this by setting state to {0}.
Fixes: CID 375028
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_netbsd_setup_video(), struct grub_netbsd_btinfo_framebuf
params is called but isn't being initialized. The member grub_uint8_t
reserved[16] isn't set to any values and is instead filled with junk data from
the stack. We can prevent this by setting params to {0}.
Fixes: CID 375026
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_net_ipv6_get_link_local(), grub_net_network_level_address_t
addr is called but isn't being initialized. This results in the member
grub_dns_option_t option being filled with junk data from the stack. We can
prevent this by setting the option member in addr to 0.
Fixes: CID 375033
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_net_configure_by_dhcp_ack(),
grub_net_network_level_address_t addr is called but isn't being initialized.
This results in the member grub_dns_option_t option being filled with junk data
from the stack. To prevent this, we can set the option member in addr to 0.
Fixes: CID 375036
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_net_arp_receive(), grub_net_network_level_address_t
sender_addr and target_addr are being called but aren't being initialized.
In both of these structs, each member is being set to a value except for
grub_dns_option_t option. This results in this member being filled with junk
data from the stack. To prevent this, we can set the option member in both
structs to 0.
Fixes: CID 375030
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If the machine has network cards found, but there are no tcp open sockets
(because the user doesn't use the network to boot), then grub_net_tcp_retransmit()
should be a noop. Thus GRUB doesn't need to call grub_get_time_ms(), which
does a call into firmware on powerpc-ieee1275, and probably other targets.
So only call grub_get_time_ms() if there are tcp sockets.
Aside from improving performance, its also useful to stay out of the firmware
as much as possible when debugging via QEMU because its a pain to get back
in to GRUB execution. grub_net_tcp_retransmit() can get called very frequently
via grub_net_poll_cards_idle() when GRUB is waiting for a keypress
(grub_getkey_noblock() calls grub_net_poll_cards_idle()). This can be annoying
when debugging an issue in GRUB on PowerPC in QEMU with GDB when GRUB is waiting
for a keypress because interrupting via GDB nearly always lands in the OpenBIOS
firmware's milliseconds call.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub_net_poll_cards_idle_real(), only call grub_net_tcp_retransmit() if there
are network cards found. If there are no network card found, there can be no
tcp sockets to transmit on. So no need to go through that logic.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This looks like it was a copy/paste error. If the net module is unloaded,
grub_net_poll_cards_idle should be NULL so that GRUB does not try to call
a function which now doesn't exist.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
