RAID 4 requires the same recovery module as RAID 5. Extend the condition to
cover both RAID levels.
Signed-off-by: Egor Ignatov <egori@altlinux.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit 3f9eace2d (util/grub-install: Delay copying files to
{grubdir,platdir} after install_device was validated) delaying
copying of files caused a regression when installing without an
existing directory structure.
This patch ensures that the platform directory actually exists by the
time the code tries to canonicalize its filename.
Fixes: 3f9eace2d (util/grub-install: Delay copying files to {grubdir,platdir} after install_device was validated)
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Previously grub-install copied modules to grubdir before doing any
validation on the install_device.
When grub-install was called with an invalid install_device, modules
were already copied to /boot before it found out and was forced to rely
on atexit() rollback.
This patch delays copying the modules after at least some install_device
validation was done, and thus reduces reliance on successful rollback.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are 3 implementations of a GUID in GRUB. Replace them with
a common one, placed in types.h.
It uses the "packed" flavor of the GUID structs, the alignment attribute
is dropped, since it is not required.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds LoongArch to the GRUB build system and various tools,
so GRUB can be built on LoongArch as a UEFI application.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This enables an early failure; for i386-ieee1275 and powerpc-ieee1275 on
Linux, without /dev/nvram the system may be left in an unbootable state.
Signed-off-by: Ismael Luceno <iluceno@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The point of no return is used to define a point where no change should
be reverted in a wake of fatal error that consequently aborts the
process. The powerpc-ieee1275 install apparently missed this point of no
return definition that newly installed modules could be inadvertently
reverted after successful image embedding so that boot failure is
incurred due to inconsistent state.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Although the EFI specification enforces support for FAT ESP, it's free
for EFI implementations to implement support for ESPs with other formats
(e.g. ext4, ntfs, etc), and at least U-Boot EFI will support ext4 ESP if
U-Boot is built with ext4 support. In some situations a GRUB installation
on such a non-FAT ESP could be useful (e.g. a NTFS-based USB disk that
can dual boot a Windows installation media and a Linux LiveCD).
As this is advanced and implementation-dependent behavior, let grub-install
allow this kind of installation, but only when --force is specified.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Refactor clean_grub_dir() to create a backup of all the files, instead
of just irrevocably removing them as the first action. If available,
register atexit() handler to restore the backup if errors occur before
point of no return, or remove the backup if everything was successful.
If atexit() is not available, the backup remains on disk for manual
recovery.
Some platforms defined a point of no return, i.e. after modules & core
images were updated. Failures from any commands after that stage are
ignored, and backup is cleaned up. For example, on EFI platforms update
is not reverted when efibootmgr fails.
Extra care is taken to ensure atexit() handler is only invoked by the
parent process and not any children forks. Some older GRUB codebases
can invoke parent atexit() hooks from forks, which can mess up the
backup.
This allows safer upgrades of MBR & modules, such that
modules/images/fonts/translations are consistent with MBR in case of
errors. For example accidental grub-install /dev/non-existent-disk
currently clobbers and upgrades modules in /boot/grub, despite not
actually updating any MBR.
This patch only handles backup and restore of files copied to /boot/grub.
This patch does not perform backup (or restoration) of MBR itself or
blocklists. Thus when installing i386-pc platform, corruption may still
occur with MBR and blocklists which will not be attempted to be
automatically recovered.
Also add modinfo.sh and *.efi to the cleanup/backup/restore code path,
to ensure it is also cleaned, backed up and restored.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Two grub_device_open() calls does not have associated NULL checks
for returned values. Fix that and appease the Coverity.
Fixes: CID 314583
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
The function grub_disk_get_size() is confusingly named because it actually
returns a sector count where the sectors are sized in the GRUB native sector
size. Rename to something more appropriate.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We don't want to support small MBR gap in pair with anything but the
simplest config of biosdisk + part_msdos + simple filesystem. In this
path "simple filesystems" are all current filesystems except ZFS and
Btrfs.
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This modifies most of the places we do some form of:
X = malloc(Y * Z);
to use calloc(Y, Z) instead.
Among other issues, this fixes:
- allocation of integer overflow in grub_png_decode_image_header()
reported by Chris Coulson,
- allocation of integer overflow in luks_recover_key()
reported by Chris Coulson,
- allocation of integer overflow in grub_lvm_detect()
reported by Chris Coulson.
Fixes: CVE-2020-14308
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top of EFI
firmware. If so, return "arm-efi". If not, fall back to "arm-uboot" as
previously.
Split out the code to (maybe) load the efivar module and check for
/sys/firmware/efi into a common helper routine is_efi_system().
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This reverts commit 082fd84d525f8d6602f892160b77c0a948308a78.
Incorrect version of the patch was pushed into the git repo.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Much like on x86, we can work out if the system is running on top
of EFI firmware. If so, return "arm-efi". If not, fall back to
"arm-uboot" as previously.
Heavily inspired by the existing code for x86.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds support for RISC-V to the grub build system. With this
patch, I can successfully build grub on RISC-V as a UEFI application.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add xen_pvh support to grub-install.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Hans van Kranenburg <hans@knorrie.org>
Rename grub_gpt_part_type to grub_gpt_part_guid and update grub_gpt_partentry
to use this type for both the partition type GUID string and the partition GUID
string entries. This change ensures that the two GUID fields are handled more
consistently and helps to simplify the changes needed to add Linux partition
GUID support.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Code is currently ignoring errors from efibootmgr, giving users
clearly bogus output like:
Setting up grub-efi-amd64 (2.02~beta3-4) ...
Installing for x86_64-efi platform.
Could not delete variable: No space left on device
Could not prepare Boot variable: No space left on device
Installation finished. No error reported.
and then potentially unbootable systems. If efibootmgr fails, grub-install
should know that and report it!
We've been using similar patch in Debian now for some time, with no ill effects.
Signed-off-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In util/getroot and efidisk slightly modify exitsing comment to mostly
retain it but still make GCC7 compliant with respect to fall through
annotation.
In grub-core/lib/xzembed/xz_dec_lzma2.c it adds same comments as
upstream.
In grub-core/tests/setjmp_tets.c declare functions as "noreturn" to
suppress GCC7 warning.
In grub-core/gnulib/regexec.c use new __attribute__, because existing
annotation is not recognized by GCC7 parser (which requires that comment
immediately precedes case statement).
Otherwise add FALLTHROUGH comment.
Closes: 50598
Incorrect drive name was being passed into grub_util_sparc_setup,
causing the grub-install to fail.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
canonicalize_file_name clashed with gnulib function. Additionally
it was declared in 2 places: emu/misc.h and util/misc.h. Added
grub_ prefix and removed second declaration.
Commit 588744d0dc655177d5883bdcb8f72ff5160109ed caused grub-mkconfig
no longer to be forgiving of trailing spaces on grub-probe output
lines, which among other things means that util/grub.d/10_linux.in
no longer detects LVM. To fix this, make grub-probe's output
delimiting more consistent. As a bonus, this improves the coverage
of the -0 option.
Fixes Debian bug #735935.
* grub-core/disk/cryptodisk.c
(grub_util_cryptodisk_get_abstraction): Add a user-data argument.
* grub-core/disk/diskfilter.c (grub_diskfilter_get_partmap):
Likewise.
* include/grub/cryptodisk.h (grub_util_cryptodisk_get_abstraction):
Update prototype.
* include/grub/diskfilter.h (grub_diskfilter_get_partmap): Likewise.
* util/grub-install.c (push_partmap_module, push_cryptodisk_module,
probe_mods): Adjust for extra user-data arguments.
* util/grub-probe.c (do_print, probe_partmap, probe_cryptodisk_uuid,
probe_abstraction): Use configured delimiter. Update callers.
According to UEFI 2.4 specification, default boot file name on AArch64
is BOOTAA64.EFI (3.4.1.1 Removable Media Boot Behavior). Also set default
GRUB image name to grubaa64.efi to match it.
