Previously, the cryptomount arguments were passed by global variable and
function call argument, neither of which are ideal. This change passes data
via a grub_cryptomount_args struct, which can be added to over time as
opposed to continually adding arguments to the cryptodisk scan and
recover_key.
As an example, passing a password as a cryptomount argument is implemented.
However, the backends are not implemented, so testing this will return a not
implemented error.
Also, add comments to cryptomount argument parsing to make it more obvious
which argument states are being handled.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Create a library function for CloseProtocol() and use it for the SNP driver.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Open Hack'Ware was the only user. It added a lot of complexity.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
... to factor out fix for glibc 2.25 introduced in 7a5b301e3 (build: Use
AC_HEADER_MAJOR to find device macros).
Note: Once glibc 2.25 is old enough and this fix is not needed also
AC_HEADER_MAJOR in configure.ac should be removed.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The underlying type of 1ULL does not change across architectures but
grub_uint64_t does. This allows using the BF64_*CODE() macros as
arguments to format string functions that use the PRI* format string
macros that also vary with architecture.
Change the grub_error() call, where this was previously an issue and
temporarily fixed by casting and using a format string literal code,
to now use PRI* macros and remove casting.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Refactor clean_grub_dir() to create a backup of all the files, instead
of just irrevocably removing them as the first action. If available,
register atexit() handler to restore the backup if errors occur before
point of no return, or remove the backup if everything was successful.
If atexit() is not available, the backup remains on disk for manual
recovery.
Some platforms defined a point of no return, i.e. after modules & core
images were updated. Failures from any commands after that stage are
ignored, and backup is cleaned up. For example, on EFI platforms update
is not reverted when efibootmgr fails.
Extra care is taken to ensure atexit() handler is only invoked by the
parent process and not any children forks. Some older GRUB codebases
can invoke parent atexit() hooks from forks, which can mess up the
backup.
This allows safer upgrades of MBR & modules, such that
modules/images/fonts/translations are consistent with MBR in case of
errors. For example accidental grub-install /dev/non-existent-disk
currently clobbers and upgrades modules in /boot/grub, despite not
actually updating any MBR.
This patch only handles backup and restore of files copied to /boot/grub.
This patch does not perform backup (or restoration) of MBR itself or
blocklists. Thus when installing i386-pc platform, corruption may still
occur with MBR and blocklists which will not be attempted to be
automatically recovered.
Also add modinfo.sh and *.efi to the cleanup/backup/restore code path,
to ensure it is also cleaned, backed up and restored.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The XFS filesystem supports a bigtime feature to overcome y2038 problem.
This patch makes the GRUB able to support the XFS filesystems with this
feature enabled.
The XFS counter for the bigtime enabled timestamps starts at 0, which
translates to GRUB_INT32_MIN (Dec 31 20:45:52 UTC 1901) in the legacy
timestamps. The conversion to Unix timestamps is made before passing the
value to other GRUB functions.
For this to work properly, GRUB requires an access to flags2 field in the
XFS ondisk inode. So, the grub_xfs_inode structure has been updated to
cover full ondisk inode.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Some filesystems nowadays use 64-bit types for timestamps. So, update
grub_dirhook_info struct to use an grub_int64_t type to store mtime.
This also updates the grub_unixtime2datetime() function to receive
a 64-bit timestamp argument and do 64-bit-safe divisions.
All the remaining conversion from 32-bit to 64-bit should be safe, as
32-bit to 64-bit attributions will be implicitly casted. The most
critical part in the 32-bit to 64-bit conversion is in the function
grub_unixtime2datetime() where it needs to deal with the 64-bit type.
So, for that, the grub_divmod64() helper has been used.
These changes enables the GRUB to support dates beyond y2038.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are already PRI*_T constants defined for unsigned integers but not
for signed integers. Add format specifiers for the latter.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The messages associated with other similar GRUB_ERR_OUT_OF_RANGE errors
were lacking the trailing full stop. Syncing up the strings saves a small
amount of precious core image space on i386-pc.
DOWN: obj/i386-pc/grub-core/kernel.img (31740 > 31708) - change: -32
DOWN: i386-pc core image (biosdisk ext2 part_msdos) (27453 > 27452) - change: -1
DOWN: i386-pc core image (biosdisk ext2 part_msdos diskfilter mdraid09) (32367 > 32359) - change: -8
Signed-off-by: Colin Watson <cjwatson@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The hdr_offset member of the ARM Linux image header appears at
offset 0x3c, matching the PE/COFF spec's placement of the COFF
header offset in the MS-DOS header. We're currently off by four,
so fix that.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This should help prevent format string errors and thus improve the quality
of error reporting.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
UEFI specification 2.8 errata B introduced the EFI_RT_PROPERTIES_TABLE
describing the services available at runtime.
The lsefisystab command is used to display installed EFI configuration
tables. Currently it only shows the GUID but not a short text for the
new table.
Provide a short text for the EFI_RT_PROPERTIES_TABLE_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_printf_fmt_check() function parses the arguments of an untrusted
printf() format and an expected printf() format and then compares the
arguments counts and arguments types. The arguments count in the untrusted
format string must be less or equal to the arguments count in the expected
format string and both arguments types must match.
To do this the parse_printf_arg_fmt() helper function is extended in the
following way:
1. Add a return value to report errors to the grub_printf_fmt_check().
2. Add the fmt_check argument to enable stricter format verification:
- the function expects that arguments definitions are always
terminated by a supported conversion specifier.
- positional parameters, "$", are not allowed, as they cannot be
validated correctly with the current implementation. For example
"%s%1$d" would assign the first args entry twice while leaving the
second one unchanged.
- Return an error if preallocated space in args is too small and
allocation fails for the needed size. The grub_printf_fmt_check()
should verify all arguments. So, if validation is not possible for
any reason it should return an error.
This also adds a case entry to handle "%%", which is the escape
sequence to print "%" character.
3. Add the max_args argument to check for the maximum allowed arguments
count in a printf() string. This should be set to the arguments count
of the expected format. Then the parse_printf_arg_fmt() function will
return an error if the arguments count is exceeded.
The two additional arguments allow us to use parse_printf_arg_fmt() in
printf() and grub_printf_fmt_check() calls.
When parse_printf_arg_fmt() is used by grub_printf_fmt_check() the
function parse user provided untrusted format string too. So, in
that case it is better to be too strict than too lenient.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit 32ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled) reintroduced CVE-2020-15705 which
previously only existed in the out-of-tree linuxefi patches and was
fixed as part of the BootHole patch series.
Under Secure Boot enforce loading shim_lock verifier. Allow skipping
shim_lock verifier if SecureBoot/MokSBState EFI variables indicate
skipping validations, or if GRUB image is built with --disable-shim-lock.
Fixes: 132ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled)
Fixes: CVE-2020-15705
Fixes: CVE-2021-3418
Reported-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a --sbat option to the grub-mkimage tool which allows us to import
an SBAT metadata formatted as a CSV file into a .sbat section of the
EFI binary.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It works only on UEFI platforms but can be quite easily extended to
others architectures and platforms if needed.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Add a new variable sized heap buffer type (grub_buffer_t) with simple
operations for appending data, accessing the data and maintaining
a read cursor.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Valgrind identified the following use of uninitialized data:
==2782220== Conditional jump or move depends on uninitialised value(s)
==2782220== at 0x42B364: grub_hfsplus_btree_search (hfsplus.c:566)
==2782220== by 0x42B21D: grub_hfsplus_read_block (hfsplus.c:185)
==2782220== by 0x42A693: grub_fshelp_read_file (fshelp.c:386)
==2782220== by 0x42C598: grub_hfsplus_read_file (hfsplus.c:219)
==2782220== by 0x42C598: grub_hfsplus_mount (hfsplus.c:330)
==2782220== by 0x42B8C5: grub_hfsplus_dir (hfsplus.c:958)
==2782220== by 0x4C1AE6: grub_fs_probe (fs.c:73)
==2782220== by 0x407C94: grub_ls_list_files (ls.c:186)
==2782220== by 0x407C94: grub_cmd_ls (ls.c:284)
==2782220== by 0x4D7130: grub_extcmd_dispatcher (extcmd.c:55)
==2782220== by 0x4045A6: execute_command (grub-fstest.c:59)
==2782220== by 0x4045A6: fstest (grub-fstest.c:433)
==2782220== by 0x4045A6: main (grub-fstest.c:772)
==2782220== Uninitialised value was created by a heap allocation
==2782220== at 0x483C7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==2782220== by 0x4C0305: grub_malloc (mm.c:42)
==2782220== by 0x42C21D: grub_hfsplus_mount (hfsplus.c:239)
==2782220== by 0x42B8C5: grub_hfsplus_dir (hfsplus.c:958)
==2782220== by 0x4C1AE6: grub_fs_probe (fs.c:73)
==2782220== by 0x407C94: grub_ls_list_files (ls.c:186)
==2782220== by 0x407C94: grub_cmd_ls (ls.c:284)
==2782220== by 0x4D7130: grub_extcmd_dispatcher (extcmd.c:55)
==2782220== by 0x4045A6: execute_command (grub-fstest.c:59)
==2782220== by 0x4045A6: fstest (grub-fstest.c:433)
==2782220== by 0x4045A6: main (grub-fstest.c:772)
This happens when the process of reading the catalog file goes sufficiently
wrong that there's an attempt to read the extent overflow file, which has
not yet been loaded. Keep track of when the extent overflow file is
fully loaded and refuse to use it before then.
The load valgrind doesn't like is btree->nodesize, and that's then used
to allocate a data structure. It looks like there are subsequently a lot
of reads based on that pointer so OOB reads are likely, and indeed crashes
(albeit difficult-to-replicate ones) have been observed in fuzzing.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The maximum number of configurations and interfaces are fixed but there is
no out-of-bound checking to prevent a malicious USB device to report large
values for these and cause accesses outside the arrays' memory.
Fixes: CVE-2020-25647
Reported-by: Joseph Tartaro <joseph.tartaro@ioactive.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When a module is attempted to be removed its reference counter is always
decremented. This means that repeated rmmod invocations will cause the
module to be unloaded even if another module depends on it.
This may lead to a use-after-free scenario allowing an attacker to execute
arbitrary code and by-pass the UEFI Secure Boot protection.
While being there, add the extern keyword to some function declarations in
that header file.
Fixes: CVE-2020-25632
Reported-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When the GRUB starts on a secure boot platform, some commands can be
used to subvert the protections provided by the verification mechanism and
could lead to booting untrusted system.
To prevent that situation, allow GRUB to be locked down. That way the code
may check if GRUB has been locked down and further restrict the commands
that are registered or what subset of their functionality could be used.
The lockdown support adds the following components:
* The grub_lockdown() function which can be used to lockdown GRUB if,
e.g., UEFI Secure Boot is enabled.
* The grub_is_lockdown() function which can be used to check if the GRUB
was locked down.
* A verifier that flags OS kernels, the GRUB modules, Device Trees and ACPI
tables as GRUB_VERIFY_FLAGS_DEFER_AUTH to defer verification to other
verifiers. These files are only successfully verified if another registered
verifier returns success. Otherwise, the whole verification process fails.
For example, PE/COFF binaries verification can be done by the shim_lock
verifier which validates the signatures using the shim_lock protocol.
However, the verification is not deferred directly to the shim_lock verifier.
The shim_lock verifier is hooked into the verification process instead.
* A set of grub_{command,extcmd}_lockdown functions that can be used by
code registering command handlers, to only register unsafe commands if
the GRUB has not been locked down.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move the shim_lock verifier from its own module into the core image. The
Secure Boot lockdown mechanism has the intent to prevent the load of any
unsigned code or binary when Secure Boot is enabled.
The reason is that GRUB must be able to prevent executing untrusted code
if UEFI Secure Boot is enabled, without depending on external modules.
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move verifiers API from a module to the kernel image, so it can be
used there as well. There are no functional changes in this patch.
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch is similar to commit 9dab2f51e (sparc: Enable __clzsi2() and
__clzdi2()) but for MIPS target and __clzdi2() only, __clzsi2() was
already enabled.
Suggested-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Do some sanity checking on data coming from the LUKS2 header. If segment.size
is "dynamic", verify that the offset is not past the end of disk. Otherwise,
check for errors from grub_strtoull() when converting segment size from
string. If a GRUB_ERR_BAD_NUMBER error was returned, then the string was
not a valid parsable number, so skip the key. If GRUB_ERR_OUT_OF_RANGE was
returned, then there was an overflow in converting to a 64-bit unsigned
integer. So this could be a very large disk (perhaps large RAID array).
In this case skip the key too. Additionally, enforce some other limits
and fail if needed.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
By default, dm-crypt internally uses an IV that corresponds to 512-byte
sectors, even when a larger sector size is specified. What this means is
that when using a larger sector size, the IV is incremented every sector.
However, the amount the IV is incremented is the number of 512 byte blocks
in a sector (i.e. 8 for 4K sectors). Confusingly the IV does not correspond
to the number of, for example, 4K sectors. So each 512 byte cipher block in
a sector will be encrypted with the same IV and the IV will be incremented
afterwards by the number of 512 byte cipher blocks in the sector.
There are some encryption utilities which do it the intuitive way and have
the IV equal to the sector number regardless of sector size (ie. the fifth
sector would have an IV of 4 for each cipher block). And this is supported
by dm-crypt with the iv_large_sectors option and also cryptsetup as of 2.3.3
with the --iv-large-sectors, though not with LUKS headers (only with --type
plain). However, support for this has not been included as grub does not
support plain devices right now.
One gotcha here is that the encrypted split keys are encrypted with a hard-
coded 512-byte sector size. So even if your data is encrypted with 4K sector
sizes, the split key encrypted area must be decrypted with a block size of
512 (ie the IV increments every 512 bytes). This made these changes less
aesthetically pleasing than desired.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add GRUB_TYPE_U_MAX/MIN(type) macros to get the max/min values for an
unsigned number with size of type.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The new macro GRUB_TYPE_BITS(type) returns the number of bits
allocated for type.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This ensures that expected order of operations is preserved when arguments
are expressions.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The function grub_disk_get_size() is confusingly named because it actually
returns a sector count where the sectors are sized in the GRUB native sector
size. Rename to something more appropriate.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There is a hardcoded maximum disk size that can be read or written from,
currently set at 1 EiB in grub_disk_adjust_range(). Move the literal into a
macro in disk.h, so our assumptions are more visible. This hard coded limit
does not prevent using larger disks, just GRUB won't read/write past the
limit. The comment accompanying this restriction didn't quite make sense to
me, so its been modified too.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We don't want to support small MBR gap in pair with anything but the
simplest config of biosdisk + part_msdos + simple filesystem. In this
path "simple filesystems" are all current filesystems except ZFS and
Btrfs.
Signed-off-by: Vladimir Serbinenko <phcoder@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that the GRUB has a grub_efi_get_secureboot() function to check the
UEFI Secure Boot status, use it to report that to the Linux kernel.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Introduce grub_efi_get_secureboot() function which returns whether
UEFI Secure Boot is enabled or not on UEFI systems.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It will be used to properly detect and report UEFI Secure Boot status to
the x86 Linux kernel. The functionality will be added by subsequent patches.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is needed to properly detect and report UEFI Secure Boot status
to the x86 Linux kernel. The functionality will be added by subsequent
patches.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GUID will be used to properly detect and report UEFI Secure Boot
status to the x86 Linux kernel. The functionality will be added by
subsequent patches. The shim_lock protocol type is made public for
completeness.
Additionally, fix formatting of four preceding GUIDs.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This header uses types defined in <grub/types.h> but does not include it,
which leads to compile errors like the following:
In file included from ../include/grub/cpu/linux.h:19,
from kern/efi/sb.c:21:
../include/grub/i386/linux.h:80:3: error: unknown type name ‘grub_uint64_t’
80 | grub_uint64_t addr;
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This makes it clear that the offset represents sectors, not bytes, in
order to improve readability.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This creates an alignment with grub_disk_t naming of the same field and is
more intuitive as to how it should be used.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This header uses types defined in <grub/types.h> but does not include it,
which leads to compile errors like the following:
../include/grub/cpu/linux.h:27:3: error: unknown type name ‘grub_uint32_t’
27 | grub_uint32_t code0; /* Executable code */
| ^~~~~~~~~~~~~
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The header uses the EXPORT_FUNC() macro defined in <grub/types.h> but
doesn't include it, which leads to the following compile error on arm:
../include/grub/cpu/system.h:12:13: error: ‘EXPORT_FUNC’ declared as function returning a function
12 | extern void EXPORT_FUNC(grub_arm_disable_caches_mmu) (void);
| ^~~~~~~~~~~
../include/grub/cpu/system.h:12:1: warning: parameter names (without types) in function declaration
12 | extern void EXPORT_FUNC(grub_arm_disable_caches_mmu) (void);
| ^~~~~~
make[3]: *** [Makefile:36581: kern/efi/kernel_exec-sb.o] Error 1
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This was probably added by accident when originally creating the file.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
