Coverity signaled 2 issues where the return value of grub_util_mkdir()
was not being tested.
The Windows variant of this code defines the function as having no
return value (void), but the UNIX variants all are mapped using a macro
to the libc mkdir() function, which returns an int value.
To be consistent, the mapping should cast to void to for these too.
Fixes: CID 73583
Fixes: CID 73617
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This command is meant to behave similarly to the "mode" command of the EFI
Shell application. In addition to allowing mode selection by giving the
number of columns and rows as arguments, the command allows specifying the
mode number to select the mode. Also supported are the arguments "min" and
"max", which set the mode to the minimum and maximum mode respectively as
calculated by the columns * rows of that mode.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI_CC_MEASUREMENT_PROTOCOL abstracts the measurement for virtual firmware
in confidential computing environment. It is similar to the EFI_TCG2_PROTOCOL.
It was proposed by Intel and ARM and approved by UEFI organization.
It is defined in Intel GHCI specification: https://cdrdv2.intel.com/v1/dl/getContent/726790 .
The EDKII header file is available at https://github.com/tianocore/edk2/blob/master/MdePkg/Include/Protocol/CcMeasurement.h .
Signed-off-by: Lu Ken <ken.lu@intel.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using the disk read hook mechanism, setup a read hook on the source disk
which will read from the given header file during the scan and recovery
cryptodisk backend functions. Disk read hooks are executed after the data
has been read from the disk. This is okay, because the read hook is given
the read buffer before its sent back to the caller. In this case, the hook
can then overwrite the data read from the disk device with data from the
header file sent in as the read hook data. This is transparent to the
read caller. Since the callers of this function have just opened the
source disk, there are no current read hooks, so there's no need to
save/restore them nor consider if they should be called or not.
This hook assumes that the header is at the start of the volume, which
is not the case for some formats (e.g. GELI). So GELI will return an
error if a detached header is specified. It also can only be used
with formats where the detached header file can be written to the
first blocks of the volume and the volume could still be unlocked.
So the header file can not be formatted differently from the on-disk
header. If these assumpts are not met, detached header file processing
must be specially handled in the cryptodisk backend module.
The hook will be called potentially many times by a backend. This is fine
because of the assumptions mentioned and the read hook reads from absolute
offsets and is stateless.
Also add a --header (short -H) option to cryptomount which takes a file
argument.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It will be desirable in the future to allow having the read hook modify the
data passed back from a read function call on a disk or file. This adds that
infrastructure and has no impact on code flow for existing uses of the read
hook. Also changed is that now when the read hook callback is called it can
also indicate what error code should be sent back to the read caller.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently, all platforms will set up their heap on initialization of the
platform code. While this works mostly fine, it poses some limitations
on memory management on us. Most notably, allocating big chunks of
memory in the gigabyte range would require us to pre-request this many
bytes from the firmware and add it to the heap from the beginning on
some platforms like EFI. As this isn't needed for most configurations,
it is inefficient and may even negatively impact some usecases when,
e.g., chainloading. Nonetheless, allocating big chunks of memory is
required sometimes, where one example is the upcoming support for the
Argon2 key derival function in LUKS2.
In order to avoid pre-allocating big chunks of memory, this commit
implements a runtime mechanism to add more pages to the system. When
a given allocation cannot be currently satisfied, we'll call a given
callback set up by the platform's own memory management subsystem,
asking it to add a memory area with at least "n" bytes. If this
succeeds, we retry searching for a valid memory region, which should
now succeed.
If this fails, we try asking for "n" bytes, possibly spread across
multiple regions, in hopes that region merging means that we end up
with enough memory for things to work out.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
In grub_memalign(), there's a commented section which would allow for
unloading of unneeded modules in case where there is not enough free
memory available to satisfy a request. Given that this code is never
compiled in, let's remove it together with grub_dl_unload_unneeded().
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
On x86_64-efi (at least) regions seem to be added from top down. The mm
code will merge a new region with an existing region that comes
immediately before the new region. This allows larger allocations to be
satisfied that would otherwise be the case.
On powerpc-ieee1275, however, regions are added from bottom up. So if
we add 3x 32MB regions, we can still only satisfy a 32MB allocation,
rather than the 96MB allocation we might otherwise be able to satisfy.
* Define 'post_size' as being bytes lost to the end of an allocation
due to being given weird sizes from firmware that are not multiples
of GRUB_MM_ALIGN.
* Allow merging of regions immediately _after_ existing regions, not
just before. As with the other approach, we create an allocated
block to represent the new space and the pass it to grub_free() to
get the metadata right.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
grub_mm_region_init() does:
h = (grub_mm_header_t) (r + 1);
where h is a grub_mm_header_t and r is a grub_mm_region_t.
Cells are supposed to be GRUB_MM_ALIGN aligned, but while grub_mm_dump
ensures this vs the region header, grub_mm_region_init() does not.
It's better to be explicit than implicit here: rather than changing
grub_mm_region_init() to ALIGN_UP(), require that the struct is
explicitly a multiple of the header size.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
A malicious tftp server can cause UAFs and a double free.
An attempt to read from a network file is handled by grub_net_fs_read(). If
the read is at an offset other than the current offset, grub_net_seek_real()
is invoked.
In grub_net_seek_real(), if a backwards seek cannot be satisfied from the
currently received packets, and the underlying transport does not provide
a seek method, then grub_net_seek_real() will close and reopen the network
protocol layer.
For tftp, the ->close() call goes to tftp_close() and frees the tftp_data_t
file->data. The file->data pointer is not nulled out after the free.
If the ->open() call fails, the file->data will not be reallocated and will
continue point to a freed memory block. This could happen from a server
refusing to send the requisite ack to the new tftp request, for example.
The seek and the read will then fail, but the grub_file continues to exist:
the failed seek does not necessarily cause the entire file to be thrown
away (e.g. where the file is checked to see if it is gzipped/lzio/xz/etc.,
a read failure is interpreted as a decompressor passing on the file, not as
an invalidation of the entire grub_file_t structure).
This means subsequent attempts to read or seek the file will use the old
file->data after free. Eventually, the file will be close()d again and
file->data will be freed again.
Mark a net_fs file that doesn't reopen as broken. Do not permit read() or
close() on a broken file (seek is not exposed directly to the file API -
it is only called as part of read, so this blocks seeks as well).
As an additional defence, null out the ->data pointer if tftp_open() fails.
That would have lead to a simple null pointer dereference rather than
a mess of UAFs.
This may affect other protocols, I haven't checked.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We must not allow other verifiers to pass things like the GRUB modules.
Instead of maintaining a blocklist, maintain an allowlist of things
that we do not care about.
This allowlist really should be made reusable, and shared by the
lockdown verifier, but this is the minimal patch addressing
security concerns where the TPM verifier was able to mark modules
as verified (or the OpenPGP verifier for that matter), when it
should not do so on shim-powered secure boot systems.
Fixes: CVE-2022-28735
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Loaders rely on global variables for saving context which is consumed
in the boot hook and freed in the unload hook. In the case where a loader
command is executed twice, calling grub_loader_set() a second time executes
the unload hook, but in some cases this runs when the loader's global
context has already been updated, resulting in the updated context being
freed and potential use-after-free bugs when the boot hook is subsequently
called.
This adds a new API, grub_loader_set_ex(), which allows a loader to specify
context that is passed to its boot and unload hooks. This is an alternative
to requiring that loaders call grub_loader_unset() before mutating their
global context.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add the options --key-file, --keyfile-offset, and --keyfile-size to
cryptomount and code to put read the requested key file data and pass
via the cargs struct. Note, key file data is for all intents and purposes
equivalent to a password given to cryptomount. So there is no need to
enable support for key files in the various crypto backends (e.g. LUKS1)
because the key data is passed just as if it were a password.
Signed-off-by: John Lane <john@lane.uk.net>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GRUB is failing to build with GCC-12 in many places like this:
In function 'init_cbfsdisk',
inlined from 'grub_mod_init' at ../../grub-core/fs/cbfs.c:391:3:
../../grub-core/fs/cbfs.c:345:7: error: array subscript 0 is outside array bounds of 'grub_uint32_t[0]' {aka 'unsigned int[]'} [-Werror=array-bounds]
345 | ptr = *(grub_uint32_t *) 0xfffffffc;
| ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is caused by GCC regression in 11/12 [1]. In a nut shell, the
warning is about detected invalid accesses at non-zero offsets to NULL
pointers. Since hardwired constant address is treated as NULL plus an
offset in the same underlying code, the warning is therefore triggered.
Instead of inserting #pragma all over the places where literal pointers
are accessed to avoid diagnosing array-bounds, we can try to borrow the
idea from Linux kernel that the absolute_pointer() macro [2][3] is used
to disconnect a pointer using literal address from it's original object,
hence GCC won't be able to make assumptions on the boundary while doing
pointer arithmetic. With that we can greatly reduce the code we have to
cover up by making initial literal pointer assignment to use the new
wrapper but not having to track everywhere literal pointers are
accessed. This also makes code looks cleaner.
Please note the grub_absolute_pointer() macro requires to be invoked in
a function as long as it is compound expression. Some global variables
with literal pointers has been changed to local ones in order to use
grub_absolute_pointer() to initialize it. The shuffling is basically done
in a selective and careful way that the variable's scope doesn't matter
being local or global, for example, the global variable must not get
modified at run time throughout. For the record, here's the list of
global variables got shuffled in this patch:
grub-core/commands/i386/pc/drivemap.c:int13slot
grub-core/term/i386/pc/console.c:bios_data_area
grub-core/term/ns8250.c:serial_hw_io_addr
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
[2] https://elixir.bootlin.com/linux/v5.16.14/source/include/linux/compiler.h#L180
[3] https://elixir.bootlin.com/linux/v5.16.14/source/include/linux/compiler-gcc.h#L31
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When using "search" on EFI systems, we sometimes want to exclude devices
that are not EFI disks, e.g. md, lvm. This is typically used when
wanting to chainload when having a software raid (md) for EFI partition:
with no option, "search --file /EFI/redhat/shimx64.efi" sets root envvar
to "md/boot_efi" which cannot be used for chainloading since there is no
effective EFI device behind.
Signed-off-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
- Fix type of size variable in luks2_verify_key()
- Avoid redefinition of SIZE_MAX and ATTRIBUTE_ERROR
- Work around gnulib's int types on older compilers
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI_IMAGE_SECURITY_DATABASE_GUID is used for the image execution
information table (cf. UEFI specification 2.9, 32.5.3.1 Using The Image
Execution Information Table).
The lsefisystab command is used to display installed EFI configuration
tables. Currently it only shows the GUID but not a short text for the
table.
Provide a short text for the EFI_IMAGE_SECURITY_DATABASE_GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These functions may be useful within modules as well. Export them so that
modules can use them.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The UEFI specification defines that the EFI_BOOT_SERVICES.Exit(() service may return
EFI_SUCCESS or EFI_INVALID_PARAMETER. So it cannot be __attribute__((noreturn)).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
I spent more than a trivial quantity of time figuring out pre_size and
whether a memory region's size contains the header cell or not.
Document the meanings of all the properties. Hopefully now no-one else
has to figure it out!
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Up to now GRUB can only embed to the first 64 KiB before primary
superblock of btrfs, effectively limiting the GRUB core size. That
could consequently pose restrictions to feature enablement like
advanced zstd compression.
This patch attempts to utilize full unused area reserved by btrfs for
the bootloader outlined in the document [1]:
The first 1MiB on each device is unused with the exception of primary
superblock that is on the offset 64KiB and spans 4KiB.
Apart from that, adjacent sectors to superblock and first block group
are not used for embedding in case of overflow and logged access to
adjacent sectors could be useful for tracing it up.
This patch has been tested to provide out of the box support for btrfs
zstd compression with which GRUB has been installed to the partition.
[1] https://btrfs.wiki.kernel.org/index.php/Manpage/btrfs(5)#BOOTLOADER_SUPPORT
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Note that cargs.search_uuid does not need to be initialized in various parts
of the cryptomount argument parsing, just once when cargs is declared with
a struct initializer. The previous code used a global variable which would
retain the value across cryptomount invocations.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The crypto device modules should only be setting up the crypto devices and
not getting user input. This has the added benefit of simplifying the code
such that three essentially duplicate pieces of code are merged into one.
Add documentation of passphrase option for cryptomount as it is now usable.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Previously, the cryptomount arguments were passed by global variable and
function call argument, neither of which are ideal. This change passes data
via a grub_cryptomount_args struct, which can be added to over time as
opposed to continually adding arguments to the cryptodisk scan and
recover_key.
As an example, passing a password as a cryptomount argument is implemented.
However, the backends are not implemented, so testing this will return a not
implemented error.
Also, add comments to cryptomount argument parsing to make it more obvious
which argument states are being handled.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Create a library function for CloseProtocol() and use it for the SNP driver.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Open Hack'Ware was the only user. It added a lot of complexity.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
... to factor out fix for glibc 2.25 introduced in 7a5b301e3 (build: Use
AC_HEADER_MAJOR to find device macros).
Note: Once glibc 2.25 is old enough and this fix is not needed also
AC_HEADER_MAJOR in configure.ac should be removed.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The underlying type of 1ULL does not change across architectures but
grub_uint64_t does. This allows using the BF64_*CODE() macros as
arguments to format string functions that use the PRI* format string
macros that also vary with architecture.
Change the grub_error() call, where this was previously an issue and
temporarily fixed by casting and using a format string literal code,
to now use PRI* macros and remove casting.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Refactor clean_grub_dir() to create a backup of all the files, instead
of just irrevocably removing them as the first action. If available,
register atexit() handler to restore the backup if errors occur before
point of no return, or remove the backup if everything was successful.
If atexit() is not available, the backup remains on disk for manual
recovery.
Some platforms defined a point of no return, i.e. after modules & core
images were updated. Failures from any commands after that stage are
ignored, and backup is cleaned up. For example, on EFI platforms update
is not reverted when efibootmgr fails.
Extra care is taken to ensure atexit() handler is only invoked by the
parent process and not any children forks. Some older GRUB codebases
can invoke parent atexit() hooks from forks, which can mess up the
backup.
This allows safer upgrades of MBR & modules, such that
modules/images/fonts/translations are consistent with MBR in case of
errors. For example accidental grub-install /dev/non-existent-disk
currently clobbers and upgrades modules in /boot/grub, despite not
actually updating any MBR.
This patch only handles backup and restore of files copied to /boot/grub.
This patch does not perform backup (or restoration) of MBR itself or
blocklists. Thus when installing i386-pc platform, corruption may still
occur with MBR and blocklists which will not be attempted to be
automatically recovered.
Also add modinfo.sh and *.efi to the cleanup/backup/restore code path,
to ensure it is also cleaned, backed up and restored.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The XFS filesystem supports a bigtime feature to overcome y2038 problem.
This patch makes the GRUB able to support the XFS filesystems with this
feature enabled.
The XFS counter for the bigtime enabled timestamps starts at 0, which
translates to GRUB_INT32_MIN (Dec 31 20:45:52 UTC 1901) in the legacy
timestamps. The conversion to Unix timestamps is made before passing the
value to other GRUB functions.
For this to work properly, GRUB requires an access to flags2 field in the
XFS ondisk inode. So, the grub_xfs_inode structure has been updated to
cover full ondisk inode.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Some filesystems nowadays use 64-bit types for timestamps. So, update
grub_dirhook_info struct to use an grub_int64_t type to store mtime.
This also updates the grub_unixtime2datetime() function to receive
a 64-bit timestamp argument and do 64-bit-safe divisions.
All the remaining conversion from 32-bit to 64-bit should be safe, as
32-bit to 64-bit attributions will be implicitly casted. The most
critical part in the 32-bit to 64-bit conversion is in the function
grub_unixtime2datetime() where it needs to deal with the 64-bit type.
So, for that, the grub_divmod64() helper has been used.
These changes enables the GRUB to support dates beyond y2038.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are already PRI*_T constants defined for unsigned integers but not
for signed integers. Add format specifiers for the latter.
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The messages associated with other similar GRUB_ERR_OUT_OF_RANGE errors
were lacking the trailing full stop. Syncing up the strings saves a small
amount of precious core image space on i386-pc.
DOWN: obj/i386-pc/grub-core/kernel.img (31740 > 31708) - change: -32
DOWN: i386-pc core image (biosdisk ext2 part_msdos) (27453 > 27452) - change: -1
DOWN: i386-pc core image (biosdisk ext2 part_msdos diskfilter mdraid09) (32367 > 32359) - change: -8
Signed-off-by: Colin Watson <cjwatson@debian.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The hdr_offset member of the ARM Linux image header appears at
offset 0x3c, matching the PE/COFF spec's placement of the COFF
header offset in the MS-DOS header. We're currently off by four,
so fix that.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This should help prevent format string errors and thus improve the quality
of error reporting.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
UEFI specification 2.8 errata B introduced the EFI_RT_PROPERTIES_TABLE
describing the services available at runtime.
The lsefisystab command is used to display installed EFI configuration
tables. Currently it only shows the GUID but not a short text for the
new table.
Provide a short text for the EFI_RT_PROPERTIES_TABLE_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_printf_fmt_check() function parses the arguments of an untrusted
printf() format and an expected printf() format and then compares the
arguments counts and arguments types. The arguments count in the untrusted
format string must be less or equal to the arguments count in the expected
format string and both arguments types must match.
To do this the parse_printf_arg_fmt() helper function is extended in the
following way:
1. Add a return value to report errors to the grub_printf_fmt_check().
2. Add the fmt_check argument to enable stricter format verification:
- the function expects that arguments definitions are always
terminated by a supported conversion specifier.
- positional parameters, "$", are not allowed, as they cannot be
validated correctly with the current implementation. For example
"%s%1$d" would assign the first args entry twice while leaving the
second one unchanged.
- Return an error if preallocated space in args is too small and
allocation fails for the needed size. The grub_printf_fmt_check()
should verify all arguments. So, if validation is not possible for
any reason it should return an error.
This also adds a case entry to handle "%%", which is the escape
sequence to print "%" character.
3. Add the max_args argument to check for the maximum allowed arguments
count in a printf() string. This should be set to the arguments count
of the expected format. Then the parse_printf_arg_fmt() function will
return an error if the arguments count is exceeded.
The two additional arguments allow us to use parse_printf_arg_fmt() in
printf() and grub_printf_fmt_check() calls.
When parse_printf_arg_fmt() is used by grub_printf_fmt_check() the
function parse user provided untrusted format string too. So, in
that case it is better to be too strict than too lenient.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit 32ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled) reintroduced CVE-2020-15705 which
previously only existed in the out-of-tree linuxefi patches and was
fixed as part of the BootHole patch series.
Under Secure Boot enforce loading shim_lock verifier. Allow skipping
shim_lock verifier if SecureBoot/MokSBState EFI variables indicate
skipping validations, or if GRUB image is built with --disable-shim-lock.
Fixes: 132ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled)
Fixes: CVE-2020-15705
Fixes: CVE-2021-3418
Reported-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a --sbat option to the grub-mkimage tool which allows us to import
an SBAT metadata formatted as a CSV file into a .sbat section of the
EFI binary.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It works only on UEFI platforms but can be quite easily extended to
others architectures and platforms if needed.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Add a new variable sized heap buffer type (grub_buffer_t) with simple
operations for appending data, accessing the data and maintaining
a read cursor.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
