In certain firmwares, e.g. OVMF, the RNG protocol is not enabled unless
there is an RNG device. When not enabled, GRUB fails to initialize the
stack guard with random bytes. For testing, this is not a big issue, but
there have been bugs found in the initialization. So turn this on for EFI
platforms to catch any regressions.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allow using the envvar GRUB_SHELL_LUKS_TIMEOUT to change the default
timeout. If not specified, use value of GRUB_SHELL_DEFAULT_TIMEOUT. And
if that is not specified, fallback to original 600s timeout.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This test is meant to test output via various serial devices. Currently,
only the PCI serial device is tested.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While here, move "-qemu=*" case to be next to the "--qemu-opts=*" case.
This causes no change in logic, but is more logically located.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This allows an invocation of grub-shell to set the value of debug regardless
of the global default environment variable GRUB_SHELL_DEFAULT_DEBUG.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Since this is fairly verbose output, do not enable first level of debug
is turned on.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On some systems /usr/share/dict/american-english can be larger than the
available space on the filesystem being tested (e.g. vfat12a). This
causes a failure of the filesystem test and is not a real test failure.
Instead, use dd to copy at most 1 MiB of data to the filesystem, which is
enough for our purposes and will not fill any of the tested filesystems.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
I ran the test suite on a 3A5000 desktop, a LoongArch architecture machine,
using Archlinux for LoongArch distro, see https://github.com/loongarchlinux.
Some software versions are:
* linux 6.3.0-rc4
* gcc 13.0.1 20230312
* binutils 2.40
* qemu 7.2.0
The test results of running "make check" with qemu 7.2 are as follows:
=================================
GRUB 2.11: ./test-suite.log
=================================
# TOTAL: 85
# PASS: 73
# SKIP: 8
# XFAIL: 0
# FAIL: 2
# XPASS: 0
# ERROR: 2
.. contents:: :depth: 2
ERROR: f2fs_test
================
mount: /tmp/grub-fs-tester.20230418175640563815408.f2fs.UDs/f2fs_rw: unknown filesystem type 'f2fs'.
dmesg(1) may have more information after failed mount system call.
MOUNT FAILED.
ERROR f2fs_test (exit status: 99)
FAIL: hfs_test
==============
recode: Request `utf8..macroman' is erroneous
mkfs.hfs: name required with -v option
FAIL hfs_test (exit status: 1)
ERROR: zfs_test
===============
zpool not installed; cannot test zfs.
ERROR zfs_test (exit status: 99)
SKIP: pata_test
===============
SKIP pata_test (exit status: 77)
SKIP: ahci_test
===============
SKIP ahci_test (exit status: 77)
SKIP: uhci_test
===============
SKIP uhci_test (exit status: 77)
SKIP: ohci_test
===============
SKIP ohci_test (exit status: 77)
SKIP: ehci_test
===============
SKIP ehci_test (exit status: 77)
SKIP: fddboot_test
==================
SKIP fddboot_test (exit status: 77)
SKIP: netboot_test
==================
SKIP netboot_test (exit status: 77)
SKIP: pseries_test
==================
SKIP pseries_test (exit status: 77)
FAIL: grub_func_test
====================
WARNING: Image format was not specified for '/tmp/grub-shell.HeTAD8Ty3U/grub.iso' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
Functional test failure: shift_test:
...
gfxterm_menu_640x480xi16:3 failed: 0xce34981e vs 0xd9f04953
tests/video_checksum.c:checksum:615: assert failed: 0 Checksum
gfxterm_menu_640x480xi16:2 failed: 0xa8fb749d vs 0xbf3fa5d0
tests/video_checksum.c:checksum:615: assert failed: 0 Checksum
gfxterm_menu_640x480xi16:1 failed: 0xce34981e vs 0xd9f04953
gfxterm_menu: FAIL
...
videotest_checksum:
videotest_checksum: PASS
exfctest:
exfctest: PASS
TEST FAILURE
FAIL grub_func_test (exit status: 1)
We got 2 errors:
* f2fs_test
The kernel uses 16k pages, causing failures when loading the f2fs kernel module,
see https://github.com/torvalds/linux/blob/master/fs/f2fs/super.c#L4670
This error can be ignored.
* zfs_test
zfs does not support the LoongArch architecture and is not compatible with the
6.3 kernel.
This error can be ignored.
We got 2 failures:
* hfs_test
I use recode 3.7.14-1 on Archlinux, running `recode -l` gives no output `MacRoman`,
so we get this error.
On Linux systems that support LoongArch, there is currently no need to use HFS,
so this failure can be ignored.
* grub_func_test
I don't know the reason for this failure. I guess it may be related to qemu's edk2.
In the previous review, I was told that the failure here is the expected behavior.
So, we can ignore this failure.
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In filesystem timestamp test, a check is done to verify that the timestamp
for a file as reported in Linux by the filesystem is within a few seconds
of the timestamp as reported by GRUB. This is done by grepping the output
of GRUB's ls command for the timestamp as reported by the filesystem in
Linux and for each of 3 seconds past that timestamp. All of these checks
except one redirect the output of grep to /dev/null. Fix this exception
to behave as the other checks.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The ISO filesystem image iso9660_early_ce.iso exposes the unusual
situation that the Rock Ridge name entry of its only file is located
after a CE entry which points to the next continuation area.
The correct behavior is to read the Rock Ridge name and to only then
load the next continuation area. If GRUB performs this correctly, then
the name "RockRidgeName:x" will be read and reported by grub-fstest.
If GRUB wrongly performs the CE hop immediately when encountering the CE
entry, then the dull ISO 9660 name "rockridg" will not be overridden and
be put out by grub-fstest.
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Tested-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The functional test requires unicode.pf2 to run successfully, so
explicitly have the test return ERROR when its not found.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Tested-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tests should be SKIP'd only when they do not apply to a particular target.
Hard errors are for when the test should run but can not be setup properly.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These are not added to grub-fs-tester because they are not generated and
none of the filesystem tests are run on these ISOs. The test is to run the
command "ls /" on the ISO, and a failure is determined if the command
times out, has non-zero return value or has any output.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Tested-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
By using a shell variable that is set once by the expansion of an autoconf
variable, the resulting script is more readable.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When re-running a failed test, even the non-standard grub-shell QEMU
arguments should be preserved in the run.sh to more precisely replay
the failed test run.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now it becomes trivial to re-run a test from the output in its working
directory. This also makes it easy to send a reproducible failing test to
the mailing list. This has allowed a refactor so that the duplicated code
to call QEMU has be condensed (e.g. the use of timeout and file descriptor
redirection). The run.sh script will pass any arguments given to QEMU.
This allows QEMU to be easily started in a state ready for GDB to be
attached.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This allows turning on shell tracing for grub-shell and grub-fs-tester
when its not practical or not possible to use command line arguments
(e.g. from "make check"). Turn on tracing when the envvar is an integer
greater than 1, since these can generate a lot of output. Since this
change uses the environment variables to set the default value for debug
in grub-shell, this allows enabling grub-shell's debug mode which will
preserve various generated output files that are helpful for debugging
tests.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The logical sector size used by LUKS1 is 512 bytes and LUKS2 uses 512 to
4069 bytes. The default password used is "pass", but can be overridden
by setting the PASS environment variable. The device mapper name is set
to the name of the temp directory so that its easy to correlate device
mapper name with a particular test run. Also since this name is unique
per test run, multiple simultaneous test runs are allowed.
Note that cryptsetup is passing the --disable-locks parameter to allow
cryptsetup run successfully when /run/lock/cryptsetup is not accessible.
Since the device mapper name is unique per test run, there is no need to
worry about locking the device to serialize access.
Signed-off-by: Pierre-Louis Bonicoli <pierre-louis.bonicoli@libregerbil.fr>
Tested-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_cmd_cryptomount make check test performs some functional testing
of cryptomount and by extension the underlying cryptodisk infrastructure.
A utility test script named grub-shell-luks-tester is created to handle the
complexities of the testing, making it simpler to add new test cases in
grub_cmd_cryptomount.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This allows test case scripts to use the appropriate halt command for
the built architecture to end execution early. Otherwise, test case
scripts have no way to know the appropriate mechanism for halting the
test case early.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When turning on shell tracing the trim line will be output before we
actually want to start the trim. However, in this case the trim line never
starts from the beginning of the line. So start trimming from the correct
line by matching from the beginning of the line.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This will be useful for tests that have unwanted output from setup. This is
not documented because its only intended to be internal at the moment. Also,
--no-trim is allowed to explicitly turn off trim.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This keeps the generated files to aid in diagnosing the source of the failure.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This allows us to test if unexpected output in test scripts is because of
a bug in GRUB, because there was an error in QEMU, or QEMU was killed due
to a timeout.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit f5759a878 (normal/help: Add paging instructions to normal and help
prompts) changed the output of the help command, which broke the help
test. This change allows the test to pass.
On the occasion do s/outpu/output/.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This allows seeing full QEMU output of grub-shell, which can be invaluable
when debugging failing tests.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When running tests there are many invocations of grub-shell, and because
the output files are all random names in the same tmp directory, it
becomes more work to figure out which files went with which grub-shell
invocations. So all generated files from one invocation of grub-shell
are put into a randomly named directory, so as not to collide with other
grub-shell invocations. And now that the generated files can be put in
a location where they will not get stepped on, and they can be named
sensible names.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In some filesystem utils like mksquashfs, they will silently change
behaviour and cause timestamps to unexpectedly change. Build
environments like Debian's set SOURCE_DATE_EPOCH in the environment,
so remove it. Reproducible builds are good and useful for shipped
artifacts, but this causes build-time tests to fail.
Signed-off-by: Steve McIntyre <steve@einval.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The previous behavior ignored an error and the output from grub-mkrescue.
This made it difficult to discover that grub-mkrescue was the reason that
tests which rely on grub-shell were failing. Even after discovering
grub-mkrescue was the culprit, there was no output to indicate why it was
failing. It turns out that grub-mkrescue is a thin wrapper around xorriso.
So if you do not have xorriso installed it will fail with an error message
about not being able to find xorriso.
This change will allow grub-mkrescue output to be written to stderr, only
if grub-mkrescue fails. If grub-mkrescue succeeds, there will be no output
from grub-mkrescue so as not to interfere with the functioning of tests.
This change should have no effect on the running of tests or other uses of
grub-shell as it only modifies the error path.
Also, if grub-mkrescue fails, the script exits early. Since grub-shell
needs the ISO image created by grub-mkresue to boot the QEMU instance,
a failure here should be considered fatal.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
By using shell variable that are set once by the expansion of an autoconf
variable, the resulting shell script is more easily moved and modified
from the build/install directory it was generated for. The resulting
script is more readable as well.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This breaks the tests on pseries - just restrict it to x86 platforms
that don't specify an EFI.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The partmap test requires no elevated privileges. However, it uses parted
which can be used as a normal user, but is usually located in /sbin or
/usr/bin (eg. on Debian systems). Whereas the normal user does not usually
have /sbin or /usr/sbin added to their path, thus parted will not be found
causing the test to abort. Add /sbin and /usr/sbin to the path for the
partmap test so that the test can run successfully as an unprivileged user.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On failure, the hfs test should show both the host and GRUB determined fs
UUID. Prior to this change, both outputs where generated by GRUB, which is
less helpful in determining the cause of failure.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
ZFS file systems are not unmounted using umount, but instead by exporting
them. So export the ZFS file system that has the same label as the one that
was created during the test, if such one exists. This is required to delete
the loopback device that uses the ZFS image file. Otherwise the added code
to delete all loopback devices setup during the test run will never be able
to finish because the loopback device can not be deleted while in use.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When all tests complete successfully, filesystems mounted by grub-fs-tester
will be unmounted before exiting. However, on certain test failures the
tester will exit with a failure code and not unmount previously mounted
filesystems. Now keep track of mounts and umounts and run an exit handler
on exit or process interruption that will umount all mounts that haven't
already been unmounted.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Instead of "tmp" the name is prefixed by the name of the scripts (e.g.
grub-fs-tester). A timestamp is added in the name to allow for easily
seeing a chronological sorting of runs and the name of the filesystem
being tested. The random component is set to the minimal possible,
3 characters, because the timestamp should provide enough uniqueness.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using the blkid cache can cause issues when running many file system tests
in parallel. We do not need it, as its only there to improve performance,
and using the cache does not provide significant performance improvements.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This bashism allows converting NUM in base BASE to decimal. Its not needed
because the only place its used is to convert from hexidecimal and this can
also be done with the more portable $((0xHEXNUM)) syntax.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In comparison to other i386 targets, on i386-efi the Q35 QEMU machine type
is used to do the testing to be able to make use of the EFI firmware in
QEMU. On the Q35 machine type there is no way to use ATA to communicate with
an IDE, only AHCI.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The image file can be useful in debugging an issue when the test fails.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The iso9660 tests test creating isos with different combinations of
Joliet, Rock Ridge, and ISO 9660 conformance level. Refactor xorriso
argument generation for more readability and extensibility.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Many tests abort due to not being root or missing tools, for instance mkfs
commands for file system tests. The tests are exited with code 77, which
means they were skipped. A skipped test is a test that should not be run,
e.g. a test specific to ARM64 should not be run on an x86 build. These aborts
are actually a hard error, code 99. That means that the test could not be
completed, but not because what was supposed to be tested failed, e.g. in
these cases where a missing tool prevents the running of a test.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
