There are 3 implementations of a GUID in GRUB. Replace them with
a common one, placed in types.h.
It uses the "packed" flavor of the GUID structs, the alignment attribute
is dropped, since it is not required.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a function to the EFI module that allows setting EFI variables
with specific attributes.
This is useful for marking variables as volatile, for example.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/kern/efi/mm.c, grub_efi_finish_boot_services() has an instance
where the memory for the variable finish_mmap_buf is freed, but on the next
iteration of a while loop, grub_efi_get_memory_map() uses finish_mmap_buf. To
prevent this, we can set finish_mmap_buf to NULL after the free.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI spec mandates that the handle produced by the LoadImage boot
service has a LoadedImage protocol instance installed on it, but for
robustness, we should still deal with a NULL return value from the
helper routine that obtains this protocol pointer.
If this happens, don't try to start the image but unload it and return
an error.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Switch the x86 based EFI platform builds to the generic EFI loader,
which exposes the initrd via the LoadFile2 protocol instead of the
x86-specific setup header. This will launch the Linux kernel via its EFI
stub, which performs its own initialization in the EFI boot services
context before calling ExitBootServices() and performing the bare metal
Linux boot.
Given that only Linux kernel versions v5.8 and later support this initrd
loading method, the existing x86 loader is retained as a fallback, which
will also be used for Linux kernels built without the EFI stub. In this
case, GRUB calls ExitBootServices() before entering the Linux kernel,
and all EFI related information is provided to the kernel via struct
boot_params in the setup header, as before.
Note that this means that booting EFI stub kernels older than v5.8 is
not supported even when not using an initrd at all. Also, the EFI
handover protocol, which has no basis in the UEFI specification, is not
implemented.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The call wrappers are no longer needed now that GCC can generate
function calls using MS calling convention, so let's get rid of them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that GCC can generate function calls using the correct calling
convention for us, we can stop using the efi_call_XX() wrappers, and
just dereference the function pointers directly.
This avoids the untyped variadic wrapper routines, which means better
type checking for the method calls.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
UEFI mandates MS calling convention on x86_64, which was not supported
on GCC when UEFI support was first introduced into GRUB. However, now we
can use the ms_abi function type attribute to annotate functions and
function pointers as adhering to the MS calling convention, and the
compiler will generate the correct instruction sequence for us.
So let's add the appropriate annotation to all the function prototypes.
This will allow us to drop the special call wrappers in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_efi_pxe_t struct definition has placeholders for the various
protocol method pointers, given that they are never called in the code,
and the prototypes have been omitted, and therefore do not comply with
the UEFI spec.
So let's convert them into void* pointers, so they cannot be called
inadvertently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/loader/multiboot_elfxx.c, we need to make sure that the program
header offset is less than the file size along with the MULTIBOOT_SEARCH
constant. We can do so by setting the variable phlimit to the minimum value of
the two limits and check it each time we change program header index to insure
that the program header offset isn't outside of the limits.
Fixes: CID 314029
Fixes: CID 314038
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/loader/multiboot_elfxx.c, space is being allocated for the section
header region, but isn't verifying if the region is within the file's size.
Before calling grub_calloc(), we can add a conditional to check if the section
header region is smaller than the file size.
Fixes: CID 314029
Fixes: CID 314038
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/loader/multiboot_elfxx.c, the code is filling an area of memory
with grub_memset() but doesn't check if there is space in the allocated memory
before doing so. To make sure we aren't zeroing memory past the allocated memory
region, we need to check that the offset into the allocated memory region plus
the memory size of the program is smaller than the allocated memory size.
Fixes: CID 314029
Fixes: CID 314038
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The return value of grub_loongarch64_stack_pop() is unsigned, so -1 should
not be used in the first place. Replacing with 0 is enough to avoid the
UB in this edge case.
Technically though, proper error handling is needed throughout the
management of the reloc stack, so no unexpected behavior will happen
even in case of malformed object code input (right now, pushes become
no-ops when the stack is full, and garbage results if the stack does not
contain enough operands for an op). The refactor would touch some more
places so would be best done in a separate series.
Fixes: CID 407777
Fixes: CID 407778
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Glenn suggested to rename the existing PCI_CLASS defines to have
explicit class and subclass names.
Suggested-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Loosely based on early_pci_serial_init() from Linux, allow GRUB to make
use of PCI serial devices.
Specifically, my Alderlake NUC exposes the Intel AMT SoL UART as a PCI
enumerated device but doesn't include it in the EFI tables.
Tested and confirmed working on a "Lenovo P360 Tiny" with Intel AMT
enabled. This specific machine has (from lspci -vv):
00:16.3 Serial controller: Intel Corporation Device 7aeb (rev 11) (prog-if 02 [16550])
DeviceName: Onboard - Other
Subsystem: Lenovo Device 330e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 40a0 [size=8]
Region 1: Memory at b4224000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial
From which the following config (/etc/default/grub) gets a working
serial setup:
GRUB_CMDLINE_LINUX="console=tty0 earlyprintk=pciserial,00:16.3,115200 console=ttyS0,115200"
GRUB_SERIAL_COMMAND="serial --port=0x40a0 --speed=115200"
GRUB_TERMINAL="serial console"
Documentation is added to note that serial devices found on the PCI bus will
be exposed as "pci,XX:XX.X" and how to find serial terminal logical names.
Also, some minor documentation improvements were added.
This can be tested in QEMU by adding a pci-serial device, e.g. using the option
"-device pci-serial".
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On some systems /usr/share/dict/american-english can be larger than the
available space on the filesystem being tested (e.g. vfat12a). This
causes a failure of the filesystem test and is not a real test failure.
Instead, use dd to copy at most 1 MiB of data to the filesystem, which is
enough for our purposes and will not fill any of the tested filesystems.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The menu entry commands now have their own section. Change the wording in
the section that they were in to reflect this.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On failure to allocate from grub_relocator_firmware_alloc_region() in
malloc_in_range() the function would stop enforcing the alignment, and
the following was returned:
lib/relocator.c:431: trying to allocate in 0x200000-0xffbf9fff aligned 0x200000 size 0x406000
lib/relocator.c:1197: allocated: 0x74de2000+0x406000
lib/relocator.c:1407: allocated 0x74de2000/0x74de2000
Fix this by making sure that target always contains a suitably aligned
address. After the change the return from the function is:
lib/relocator.c:431: trying to allocate in 0x200000-0xffb87fff aligned 0x200000 size 0x478000
lib/relocator.c:1204: allocated: 0x74c00000+0x478000
lib/relocator.c:1414: allocated 0x74c00000/0x74c00000
Fixes: 3a5768645c05 (First version of allocation from firmware)
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The access_size is part of a union, so doesn't technically exist for
a PIO port (i.e., not MMIO), but we set it anyways.
This doesn't cause a bug today because the other leg of the union
doesn't have anything overlapping with it now, but it's bad, I will
punish myself for writing it that way :-) In the meantime, fix this
and actually name the struct inside the union for clarity of intent
and to avoid such issue in the future.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit f23bc6510 (Transform -C option to grub-mkstandalone to
--core-compress available in all grub-install flavours.) declared
a new long option for specifying the compression method to use for
the core image.
However, the option key has not been replaced in the parser function,
it still expects the old one formerly used by grub-mkstandalone.
Because of this the option is not recognized by any of the utils for
which it is listed as supported.
Signed-off-by: Ákos Nagy <nagyakos@outlook.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When an invalid node size is detected in grub_hfsplus_mount(), data
pointer is freed. Thus, file->data is not set. The code should also
set the grub_errno when that happens to indicate an error and to avoid
accessing the uninitialized file->data in grub_file_close().
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A corrupted hfsplus can have a catalog key that is out of range. This
can lead to out of bound access when advancing the pointer to access
catalog file info. The valid range of a catalog key is specified in
HFS Plus Technical Note TN1150 [1].
[1] https://developer.apple.com/library/archive/technotes/tn/tn1150.html
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The invalid btree node size can cause crashes when parsing the btree.
The fix is to ensure the btree node size is within the valid range
defined in the HFS Plus technical note, TN1150 [1].
[1] https://developer.apple.com/library/archive/technotes/tn/tn1150.html
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The exfat-utils package is an older package complementing exfat-fuse, and
was the only exfat tools for a long time. The exfat filesystem testing code
was written with these tools in mind. A newer project exfatprogs appears to
be of better quality and functionality and was written to complement the
somewhat new exfat kernel module. Ideally we should be using the newer
exfatprogs. However, the command line interface for mkfs.exfat is different
between the two. So we can't use the exfatprogs tools until the test scripts
have been updated to account for this. Recommend installing exfat-utils
instead of exfatprogs for now.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When trying to resolve DNS names into IP addresses, the DNS code fails
from time to time with the following error:
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
error: ../../grub-core/net/dns.c:688:no DNS record found.
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
This happens when both IPv4 and IPv6 queries are performed against the
DNS server (e.g. 8.8.8.8) but there is no IP returned for IPv6 query, as
shown below:
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
grub> net_del_dns 192.168.122.1
grub> net_add_dns 8.8.8.8
grub> net_nslookup ipv4.test-ipv6.com
error: ../../grub-core/net/dns.c:688:no DNS record found.
grub> net_nslookup ipv4.test-ipv6.com
216.218.228.115
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
The root cause is the code exiting prematurely when the data->addresses
buffer has been allocated in recv_hook(), even if there was no address
returned last time recv_hook() executed.
Signed-off-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When deleting the DNS server, we get the following error message:
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
grub> net_del_dns 192.168.122.1
error: ../../grub-core/net/dns.c:646:no DNS reply received.
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
This happens because the implementation is broken, it does a "add"
internally instead of a "delete".
Signed-off-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
I ran the test suite on a 3A5000 desktop, a LoongArch architecture machine,
using Archlinux for LoongArch distro, see https://github.com/loongarchlinux.
Some software versions are:
* linux 6.3.0-rc4
* gcc 13.0.1 20230312
* binutils 2.40
* qemu 7.2.0
The test results of running "make check" with qemu 7.2 are as follows:
=================================
GRUB 2.11: ./test-suite.log
=================================
# TOTAL: 85
# PASS: 73
# SKIP: 8
# XFAIL: 0
# FAIL: 2
# XPASS: 0
# ERROR: 2
.. contents:: :depth: 2
ERROR: f2fs_test
================
mount: /tmp/grub-fs-tester.20230418175640563815408.f2fs.UDs/f2fs_rw: unknown filesystem type 'f2fs'.
dmesg(1) may have more information after failed mount system call.
MOUNT FAILED.
ERROR f2fs_test (exit status: 99)
FAIL: hfs_test
==============
recode: Request `utf8..macroman' is erroneous
mkfs.hfs: name required with -v option
FAIL hfs_test (exit status: 1)
ERROR: zfs_test
===============
zpool not installed; cannot test zfs.
ERROR zfs_test (exit status: 99)
SKIP: pata_test
===============
SKIP pata_test (exit status: 77)
SKIP: ahci_test
===============
SKIP ahci_test (exit status: 77)
SKIP: uhci_test
===============
SKIP uhci_test (exit status: 77)
SKIP: ohci_test
===============
SKIP ohci_test (exit status: 77)
SKIP: ehci_test
===============
SKIP ehci_test (exit status: 77)
SKIP: fddboot_test
==================
SKIP fddboot_test (exit status: 77)
SKIP: netboot_test
==================
SKIP netboot_test (exit status: 77)
SKIP: pseries_test
==================
SKIP pseries_test (exit status: 77)
FAIL: grub_func_test
====================
WARNING: Image format was not specified for '/tmp/grub-shell.HeTAD8Ty3U/grub.iso' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
Functional test failure: shift_test:
...
gfxterm_menu_640x480xi16:3 failed: 0xce34981e vs 0xd9f04953
tests/video_checksum.c:checksum:615: assert failed: 0 Checksum
gfxterm_menu_640x480xi16:2 failed: 0xa8fb749d vs 0xbf3fa5d0
tests/video_checksum.c:checksum:615: assert failed: 0 Checksum
gfxterm_menu_640x480xi16:1 failed: 0xce34981e vs 0xd9f04953
gfxterm_menu: FAIL
...
videotest_checksum:
videotest_checksum: PASS
exfctest:
exfctest: PASS
TEST FAILURE
FAIL grub_func_test (exit status: 1)
We got 2 errors:
* f2fs_test
The kernel uses 16k pages, causing failures when loading the f2fs kernel module,
see https://github.com/torvalds/linux/blob/master/fs/f2fs/super.c#L4670
This error can be ignored.
* zfs_test
zfs does not support the LoongArch architecture and is not compatible with the
6.3 kernel.
This error can be ignored.
We got 2 failures:
* hfs_test
I use recode 3.7.14-1 on Archlinux, running `recode -l` gives no output `MacRoman`,
so we get this error.
On Linux systems that support LoongArch, there is currently no need to use HFS,
so this failure can be ignored.
* grub_func_test
I don't know the reason for this failure. I guess it may be related to qemu's edk2.
In the previous review, I was told that the failure here is the expected behavior.
So, we can ignore this failure.
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds LoongArch to the GRUB build system and various tools,
so GRUB can be built on LoongArch as a UEFI application.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add support for manipulating architectural cache and timers, and EFI
memory maps.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A new set of relocation types was added in the LoongArch ELF psABI v2.00
spec [1], [2] to replace the stack-based scheme in v1.00. Toolchain
support is available from binutils 2.40 and gcc 13 onwards.
This patch adds support for the new relocation types, that are simpler
to handle (in particular, stack operations are gone). Support for the
v1.00 relocs are kept for now, for compatibility with older toolchains.
[1] https://github.com/loongson/LoongArch-Documentation/pull/57
[2] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_appendix_revision_history
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds support of the stack-based LoongArch relocations
throughout GRUB, including tools, dynamic linkage, and support for
conversion of ELF relocations into PE ones. A stack machine is required
to handle these per the spec [1] (see the R_LARCH_SOP types), of which
a simple implementation is included.
These relocations are produced by binutils 2.38 and 2.39, while the newer
v2.00 relocs require more recent toolchain (binutils 2.40+ & gcc 13+, or
LLVM 16+). GCC 13 has not been officially released as of early 2023, so
support for v1.00 relocs are expected to stay relevant for a while.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_relocations
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On entry, we need to save the system table pointer as well as our image
handle. Add an early startup file that saves them and then brings us
into our main function.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds a setjmp implementation for LoongArch.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Sun Haiyong <sunhaiyong@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
GRUB since 93a786a00 (kern/efi/sb: Enforce verification of font files)
has enforced verification of font files in secure boot mode. In order to
continue to be able to load some default fonts, vendors may bundle them
with their signed EFI image by adding them to the built-in memdisk.
This change makes the font loader try loading fonts from the memdisk
before the prefix path when attempting to load a font file by specifying
its filename, which avoids having to make changes to GRUB configurations
in order to accommodate memdisk bundled fonts. It expects the directory
structure to be the same as fonts stored in the prefix path,
i.e. /fonts/<name>.pf2.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Steve McIntyre <93sam@debian.org>
Tested-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allow specifying port numbers for http and tftp paths and allow IPv6
addresses to be recognized with brackets around them, which is required
to specify a port number.
Co-authored-by: Aaron Miller <aaronmiller@fb.com>
Signed-off-by: Aaron Miller <aaronmiller@fb.com>
Co-authored-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The notation introduced in ac8a37dda (net/http: Allow use of non-standard
TCP/IP ports) contradicts that used in downstream distributions including
Fedora, RHEL, Debian, Ubuntu, and others. Revert it and apply the downstream
notation which was originally proposed to the GRUB in 2016.
This reverts commit ac8a37dda (net/http: Allow use of non-standard TCP/IP ports).
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This fixes the GRUB on Coreboot on HP EliteBooks by implementing
a 200 ms timeout. The GRUB used to hang.
Fixes: https://ticket.coreboot.org/issues/141
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In filesystem timestamp test, a check is done to verify that the timestamp
for a file as reported in Linux by the filesystem is within a few seconds
of the timestamp as reported by GRUB. This is done by grepping the output
of GRUB's ls command for the timestamp as reported by the filesystem in
Linux and for each of 3 seconds past that timestamp. All of these checks
except one redirect the output of grep to /dev/null. Fix this exception
to behave as the other checks.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The transform_sector() function is not very clear in what it's doing
and confusing. The GRUB already has a function which is doing the same
thing in a very self explanatory way, i.e., grub_disk_to_native_sector().
So, it's much better to use self explanatory one than transform_sector().
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.vnet.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The ISO filesystem image iso9660_early_ce.iso exposes the unusual
situation that the Rock Ridge name entry of its only file is located
after a CE entry which points to the next continuation area.
The correct behavior is to read the Rock Ridge name and to only then
load the next continuation area. If GRUB performs this correctly, then
the name "RockRidgeName:x" will be read and reported by grub-fstest.
If GRUB wrongly performs the CE hop immediately when encountering the CE
entry, then the dull ISO 9660 name "rockridg" will not be overridden and
be put out by grub-fstest.
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Tested-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The SUSP specs demand that the reading of the next SUSP area which is
depicted by a CE entry shall be delayed until reading of the current
SUSP area is completed. Up to now GRUB immediately ends reading of the
current area and loads the new one. So, buffer the parameters of a found
CE entry and perform checks and reading of new data only after the
reader loop has ended.
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Tested-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch enables multiple options in Vec5 which are required and
solves the boot issues seen on some machines which are looking for
these specific options.
1. LPAR: Client program supports logical partitioning and
associated hcall()s.
2. SPLPAR: Client program supports the Shared
Processor LPAR Option.
3. DYN_RCON_MEM: Client program supports the
“ibm,dynamic-reconfiguration-memory” property and it may be
presented in the device tree.
4. LARGE_PAGES: Client supports pages larger than 4 KB.
5. DONATE_DCPU_CLS: Client supports donating dedicated processor cycles.
6. PCI_EXP: Client supports PCI Express implementations
utilizing Message Signaled Interrupts (MSIs).
7. CMOC: Enables the Cooperative Memory Over-commitment Option.
8. EXT_CMO: Enables the Extended Cooperative Memory Over-commit Option.
9. ASSOC_REF: Enables “ibm,associativity” and
“ibm,associativity-reference-points” properties.
10. AFFINITY: Enables Platform Resource Reassignment Notification.
11. NUMA: Supports NUMA Distance Lookup Table Option.
12. HOTPLUG_INTRPT: Supports Hotplug Interrupts.
13. HPT_RESIZE: Enable Hash Page Table Resize Option.
14. MAX_CPU: Defines maximum number of CPUs supported.
15. PFO_HWRNG: Supports Random Number Generator.
16. PFO_HW_COMP: Supports Compression Engine.
17. PFO_ENCRYPT: Supports Encryption Engine.
18. SUB_PROCESSORS: Supports Sub-Processors.
19. DY_MEM_V2: Client program supports the “ibm,dynamic-memory-v2” property in the
“ibm,dynamic-reconfiguration-memory” node and it may be presented in the device tree.
20. DRC_INFO: Client program supports the “ibm,drc-info” property definition and it may be
presented in the device tree.
Signed-off-by: Avnish Chouhan <avnish@linux.vnet.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch converts the plain numbers used in Vec5 properties to constants.
1. LPAR: Client program supports logical partitioning and
associated hcall()s.
2. SPLPAR: Client program supports the Shared
Processor LPAR Option.
3. CMO: Enables the Cooperative Memory Over-commitment Option.
4. MAX_CPU: Defines maximum number of CPUs supported.
Signed-off-by: Avnish Chouhan <avnish@linux.vnet.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Per systemctl(1), it "is asynchronous; it will return after the reboot
operation is enqueued, without waiting for it to complete". This differs
from kexec(8), which calls reboot(2) and therefore does not return.
When not using fallback, this confusingly results in:
error trying to perform 'systemctl kexec': 0
Aborted. Press any key to exit.
on screen for a bit, followed by successful kexec.
To reduce the likelihood of hitting this case, add a delay on successful
return. Ultimately, the systemd interface is racy: we can't avoid it
entirely unless we never fallback on success.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
