This patch adds the function fs_envblk_write to update the reserved
environment block on disk. The helper takes an in memory envblk buffer
and writes it back to the device at the location defined by the
fs_envblk specification. It performs size checks and uses file sync to
ensure that the updated data is flushed.
The helper is also added into the fs_envblk ops table, together with the
open helper from the previous patch. With this change the basic input
and output path for an external environment block is complete. The
choice of which variables should be written externally will be handled
by later patches.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Avnish Chouhan <avnish@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds the logic to locate and open an environment block that
is stored in a reserved area on the device. It introduces the function
fs_envblk_open() together with helper routines to read the block pointed
to by the env_block variable, and to create the block on disk when it
does not exist yet. When a block is created, the code records its
location inside the file based envblk by setting env_block in block list
syntax of offset plus size in sectors.
The env_block variable acts as a link from the file envblk to the raw
disk region so that later runs of grub-editenv can follow it and access
the external block. The helper is exposed through a small ops table
attached to fs_envblk so that later patches can call
fs_envblk->ops->open() without touching core code again. At this stage
variables are still stored in the file envblk and no redirection has
been applied.
In relation to this, the fs_envblk_spec table defines the file-system
specific layout of the reserved raw blocks used for environment storage.
It is prepared to facilitate integration in grub-editenv, with Btrfs to
be added in the future once its reserved area is defined.
An fs_envblk_init() helper is added to prepare it for using the ops with
its associated data context if the feature is available. It is not used
yet, but will be used later when a filesystem and its device are probed
to initialize the fs_envblk handle and enable access to the feature.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Avnish Chouhan <avnish@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The import_gcry.py script now imports kdf.c from libgcrypt. To isolate
the Argon2 implementation, all unrelated functions have been removed.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To support verification of appended signatures, we need a way to embed the
necessary public keys. Existing appended signature schemes in the Linux kernel
use X.509 certificates, so allow certificates to be embedded in the GRUB core
image in the same way as PGP keys.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Avnish Chouhan <avnish@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Prior to the addition of the X.509 public key support for appended signature,
current PGP signature relied on the GPG public key. Changing the enum name
from "OBJ_TYPE_PUBKEY" to "OBJ_TYPE_GPG_PUBKEY" to differentiate between x509
certificate based appended signature and GPG certificate based PGP signature.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Avnish Chouhan <avnish@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add infrastructure to allow firmware to verify the integrity of GRUB
by use of a Linux-kernel-module-style appended signature. We initially
target powerpc-ieee1275, but the code should be extensible to other
platforms.
Usually these signatures are appended to a file without modifying the
ELF file itself. (This is what the 'sign-file' tool does, for example.)
The verifier loads the signed file from the file system and looks at the
end of the file for the appended signature. However, on powerpc-ieee1275
platforms, the bootloader is often stored directly in the PReP partition
as raw bytes without a file-system. This makes determining the location
of an appended signature more difficult.
To address this, we add a new ELF Note.
The name field of shall be the string "Appended-Signature", zero-padded
to 4 byte alignment. The type field shall be 0x41536967 (the ASCII values
for the string "ASig"). It must be the final section in the ELF binary.
The description shall contain the appended signature structure as defined
by the Linux kernel. The description will also be padded to be a multiple
of 4 bytes. The padding shall be added before the appended signature
structure (not at the end) so that the final bytes of a signed ELF file
are the appended signature magic.
A subsequent patch documents how to create a GRUB core.img validly signed
under this scheme.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Avnish Chouhan <avnish@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When using grub-mkrescue for a riscv32 target, an invalid implicit cast
on the offset calculation produces an error during the relocation process:
grub-mkrescue: error: target XXX not reachable from pc=fc.
This patch adds an explicit grub_int64_t cast to compute the offset
as a 64-bit subtraction.
Signed-off-by: Anaëlle Cazuc <acazuc@acazuc.fr>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Attempts to build GRUB with Clang were failing due to errors such as:
error: redefinition of typedef 'gcry_md_hd_t' is a C11 feature
Correct this by adding a compiler pragma to disable the Clang
"typedef-redefinition" warnings. This required an update to
include/grub/crypto.h and the util/import_gcry.py script to add the
pragma to libgcrypt-grub's types.h due to u16 and similar types.
Signed-off-by: Andrew Hamilton <adhamilt@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is a typo that was stopping this bash-completion from being installed.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Adding filevercmp support to grub-core/commands/blsuki.c from gnulib will cause
issues with the type of the offset parameter for grub_util_write_image_at() for
emu builds. To fix this issue, we can change the type from off_t to grub_off_t.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When grub-probe fails, the current code is to just stuff an empty result
in which causes the user to not knowingly have a system that no longer
boots. grub-probe can fail because the ZFS pool that contains the root
filesystem might have features that GRUB does not yet support which is
a common configuration for people with a rpool and a bpool. This behavior
uses the zdb utility to dump the same value as the filesystem label
would print.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
libgcrypt itself is compiled with -Wno-sign-compare. Do the same for consistency.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
HAVE_STRTOUL is now defined in stdlib.h. Include it in g10lib.h rather
than defining on command line.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patches modifies the GRUB-libgcrypt API to match new libgcrypt 1.11.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In function protect_tpm2_export_tpm2key(), the "err" variable
is uninitialized in the normal (error free) path, so ensure this
defaults to GRUB_ERR_NONE.
This causes the GRUB build to fail with clang (observed with clang-14).
Fixes: 5934bf51c (util/grub-protect: Support NV index mode)
Signed-off-by: Andrew Hamilton <adhamilt@gmail.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For tpm2_key_protector and grub-protect, SHA-256 is chosen as the hash
algorithm for the TPM session. However, grub-protect mistakenly used the
hash algorithm of the PCR bank to calculate PCR digest. If the user
chose a PCR bank other than SHA-256, grub-protect created a non-SHA-256
PCR digest to seal the key. But, tpm2_key_protector expects a SHA-256
PCR digest to the TPM unsealing session, so it would fail due to digest
mismatch.
This commit fixes the hash algorithm of PCR digest in grub-protect to
avoid the potential unsealing failure.
Fixes: https://github.com/lcp/grub2/issues/4
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
RAID 4 requires the same recovery module as RAID 5. Extend the condition to
cover both RAID levels.
Signed-off-by: Egor Ignatov <egori@altlinux.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This commit implements the missing NV index mode support in grub-protect.
NV index mode stores the sealed key in the TPM non-volatile memory (NVRAM)
instead of a file. There are two supported types of TPM handles.
1. Persistent handle (0x81000000~0x81FFFFFF)
Only the raw format is supported due to the limitation of persistent
handles. This grub-protect command seals the key into the
persistent handle 0x81000000.
# grub-protect \
--protector=tpm2 \
--action=add \
--tpm2-bank=sha256 \
--tpm2-pcrs=7,11 \
--tpm2-keyfile=luks-key \
--tpm2-nvindex=0x81000000
2. NV index handle (0x1000000~0x1FFFFFF)
Both TPM 2.0 Key File format and the raw format are supported by NV
index handles. Here is the grub-protect command to seal the key in
TPM 2.0 Key File format into the NV index handle 0x1000000.
# grub-protect \
--protector=tpm2 \
--action=add \
--tpm2key \
--tpm2-bank=sha256 \
--tpm2-pcrs=7,11 \
--tpm2-keyfile=luks-key \
--tpm2-nvindex=0x1000000
Besides the "add" action, the corresponding "remove" action is also
introduced. To remove the data from a persistent or NV index handle,
just use "--tpm2-nvindex=HANDLE" combining with "--tpm2-evict". This
sample command removes the data from the NV index handle 0x1000000.
# grub-protect \
--protector=tpm2 \
--action=remove \
--tpm2-evict \
--tpm2-nvindex=0x1000000
Also set and check the boolean variables with true/false instead of 1/0.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On systems which support multiple boot platforms such as BIOS and
EFI, it makes no sense to show menu entries which are not supported
by the current boot platform. Menu entries generated from os-prober
"chain" boot type use boot sector chainloading which is supported
on PC BIOS platform only.
Show "chain" menu entries only if boot platform is PC BIOS.
Show "efi" menu entries only if boot platform is EFI.
This is aimed to allow os-prober to report both EFI and PC BIOS
boot loaders regardless of the current boot mode on x86 systems
which support both EFI and legacy BIOS boot, in order to generate
a config file which can be used with either BIOS or EFI boot.
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
GRUB documentation states:
GRUB_OS_PROBER_SKIP_LIST
List of space-separated FS UUIDs of filesystems to be ignored from
os-prober output. For efi chainloaders it’s <UUID>@<EFI FILE>
But the actual behaviour does not match this description.
GRUB_OS_PROBER_SKIP_LIST="<UUID>"
does nothing. In order to skip non-EFI bootloaders, you must set
GRUB_OS_PROBER_SKIP_LIST="<UUID>@<DEVICE>"
which is both absurd, <UUID> and <DEVICE> are redundant, and wrong,
<DEVICE> such as /dev/sd* may not be persistent across boots.
Also, any non-word character is accepted as a separator, including "-"
and "@" which may be present in UUIDs. This can cause false positives
because of partial UUID match.
This patch fixes these flaws while retaining some backward compatibility
with previous behaviour which may be expected by existing setups:
- also accept <UUID>@/dev/* (with warning) for non-EFI bootloaders,
- also accept comma and semicolon as separator.
Fixes: 55e706c9 (Add GRUB_OS_PROBER_SKIP_LIST to selectively skipping systems)
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It was possible to overflow the value of mod->ref_count, a signed
integer, by repeatedly invoking insmod on an already loaded module.
This led to a use-after-free. As once ref_count was overflowed it became
possible to unload the module while there was still references to it.
This resolves the issue by using grub_add() to check if the ref_count
will overflow and then stops further increments. Further changes were
also made to grub_dl_unref() to check for the underflow condition and
the reference count was changed to an unsigned 64-bit integer.
Reported-by: B Horn <b@horn.uk>
Signed-off-by: B Horn <b@horn.uk>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To utilize the key protectors framework, there must be a way to protect
full-disk encryption keys in the first place. The grub-protect tool
includes support for the TPM2 key protector but other protectors that
require setup ahead of time can be supported in the future.
For the TPM2 key protector, the intended flow is for a user to have
a LUKS 1 or LUKS 2-protected fully-encrypted disk. The user then creates
a new LUKS key file, say by reading /dev/urandom into a file, and creates
a new LUKS key slot for this key. Then, the user invokes the grub-protect
tool to seal this key file to a set of PCRs using the system's TPM 2.0.
The resulting sealed key file is stored in an unencrypted partition such
as the EFI System Partition (ESP) so that GRUB may read it. The user also
has to ensure the cryptomount command is included in GRUB's boot script
and that it carries the requisite key protector (-P) parameter.
Sample usage:
$ dd if=/dev/urandom of=luks-key bs=1 count=32
$ sudo cryptsetup luksAddKey /dev/sdb1 luks-key --pbkdf=pbkdf2 --hash=sha512
To seal the key with TPM 2.0 Key File (recommended):
$ sudo grub-protect --action=add \
--protector=tpm2 \
--tpm2-pcrs=0,2,4,7,9 \
--tpm2key \
--tpm2-keyfile=luks-key \
--tpm2-outfile=/boot/efi/efi/grub/sealed.tpm
Or, to seal the key with the raw sealed key:
$ sudo grub-protect --action=add \
--protector=tpm2 \
--tpm2-pcrs=0,2,4,7,9 \
--tpm2-keyfile=luks-key \
--tpm2-outfile=/boot/efi/efi/grub/sealed.key
Then, in the boot script, for TPM 2.0 Key File:
tpm2_key_protector_init --tpm2key=(hd0,gpt1)/efi/grub/sealed.tpm
cryptomount -u <SDB1_UUID> -P tpm2
Or, for the raw sealed key:
tpm2_key_protector_init --keyfile=(hd0,gpt1)/efi/grub/sealed.key --pcrs=0,2,4,7,9
cryptomount -u <SDB1_UUID> -P tpm2
The benefit of using TPM 2.0 Key File is that the PCR set is already
written in the key file, so there is no need to specify PCRs when
invoking tpm2_key_protector_init.
Signed-off-by: Hernan Gatta <hegatta@linux.microsoft.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
The SBAT metadata is read from CSV file and transformed into an ELF note
with the -s option.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In order to store the SBAT data we create a new ELF note. The string
".sbat", zero-padded to 4 byte alignment, shall be entered in the name
field. The string "SBAT"'s ASCII values, 0x53424154, should be entered
in the type field.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For NX the GRUB binary has to announce that it is compatible with the
NX feature. This implies that when loading the executable GRUB image
several attributes are true:
- the binary doesn't need an executable stack,
- the binary doesn't need sections to be both executable and writable,
- the binary knows how to use the EFI Memory Attributes Protocol on code
it is loading.
This patch:
- adds a definition for the PE DLL Characteristics flag GRUB_PE32_NX_COMPAT,
- changes grub-mkimage to set that flag.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Jan Setje-Eilers <jan.setjeeilers@oracle.com>
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Assembly code looks for modules at __bss_start. Make this position explicit
rather than matching BSS alignment and module alignment.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
As reported by Victoriia Egorova in bug 65880, grub-mkrescue does not
verify that the expected argument of an option like -d or -k does really
exist in argv. So, check the loop counter before incrementing it inside
the loop which copies argv to argp_argv. Issue an error message similar
to what older versions of grub-mkrescue did with a missing argument,
e.g. 2.02.
Fixes: https://savannah.gnu.org/bugs/index.php?65880
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allocate memory if needed, while saving the corresponding release
operation, reducing the amount of code and code complexity.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add functionality to disable command line interface access and editing of GRUB
menu entries if GRUB image is built with --disable-cli.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is required if the pathname contains spaces or GRUB shell
metacharacters else the generated config file check will fail.
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
_split_longopt() was the bash-completion private API and removed since
bash-completion 2.12. This commit initializes the bash-completion
general variables with _init_completion() to avoid the potential
"command not found" error.
Although bash-completion 2.12 introduces _comp_initialize() to deprecate
_init_completion(), _init_completion() is still chosen for the better
backward compatibility.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We reinstated these functions before the 2.12 release with a warning
such that users upgrading to 2.12 who had custom scripts using them
would not get broken in the upgrade and agreed to remove them after
the 2.12 release. This removes them accordingly.
This reverts commit e7a831963 (templates: Reinstate unused version
comparison functions with warning).
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are two system directories for bash-completion scripts. One is
/usr/share/bash-completion/completions/ and the other is
/etc/bash_completion.d/. The "etc" scripts are loaded in advance and
for backward compatibility while the "usr" scripts are loaded on demand.
To load scripts on demand it requires a corresponding script for every
command. So, the main bash-completion script is split into several
subscripts for different "grub-*" commands. To share the code the real
completion functions are still implemented in "grub" and each
subscript sources "grub" and invokes the corresponding function.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The 64-bit ABI defines ld.so to be /lib/ld-x86-64.so.1.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The HAVE_LIBZFS is defined by libzfs test and hence conflicts with
manual definition. On NetBSD it ends up detecting zfs but not detecting
nvpair and creates confusion. Split them.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It's not available on NetBSD outside of syslog. Using strerror() is more
reliable as we retrieve errno immediately rather than down the stack.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit 3f9eace2d (util/grub-install: Delay copying files to
{grubdir,platdir} after install_device was validated) delaying
copying of files caused a regression when installing without an
existing directory structure.
This patch ensures that the platform directory actually exists by the
time the code tries to canonicalize its filename.
Fixes: 3f9eace2d (util/grub-install: Delay copying files to {grubdir,platdir} after install_device was validated)
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The add_tar_files() function currently iterates through a directory's
content using readdir(), which doesn't guarantee a specific order. This
lack of deterministic behavior impacts reproducibility in the build process.
This commit resolves the issue by introducing sorting functionality.
The list retrieved by readdir() is now sorted alphabetically before
incorporation into the tar archive, ensuring consistent and predictable
file ordering within the archive.
On the occasion fix tfp memory leak.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Bernhard Wiedemann <bwiedemann@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This change mirrors a previous fix [1] but is specific to images
generated by grub-mkstandalone.
The former fix, commit 85a7be241 (util/mkimage: Use stable timestamp
when generating binaries.), focused on utilizing a stable timestamp
during binary generation in the util/mkimage context. This commit
extends that approach to the images produced by grub-mkstandalone,
ensuring consistency and stability in timestamps across all generated
binaries.
[1] 85a7be241 util/mkimage: Use stable timestamp when generating binaries.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Bernhard Wiedemann <bwiedemann@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Revert the commit a79c567f6 (templates: Remove unused version comparison
functions) and add a warning to the functions that they are deprecated.
Removing the functions directly caused a lot of upgrade issues
with custom user scripts that called the functions. In Debian and
Ubuntu, grub-mkconfig is invoked as a post-installation script
and would fail, causing upgrades to fail halfway through and
putting the package manager into an inconsistent state.
FWIW, we get one bug per 2 weeks basically, for an interim Ubuntu
release which generally does not receive much usage, that is a high
number.
The proposal is to pick this for 2.12 and directly after the release
remove it again. Then users will have time to fix their scripts without
systems breaking immediately.
This reverts commit a79c567f6 (templates: Remove unused version
comparison functions).
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Previously grub-install copied modules to grubdir before doing any
validation on the install_device.
When grub-install was called with an invalid install_device, modules
were already copied to /boot before it found out and was forced to rely
on atexit() rollback.
This patch delays copying the modules after at least some install_device
validation was done, and thus reduces reliance on successful rollback.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The function argp_parser() in util/grub-mount.c lacks a check on the
sanity of the file path when parsing parameters. This results in
a segmentation fault if a partition is mounted to a non-existent path.
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When grub-install is run with the verbose option, it will print a log
message indicating the grub-mkimage command and arguments used.
GRUB no longer calls the grub-mkimage binary internally, however the
command logged is a command that if run should effectively be what
grub-install used. However, as this has changed some of the newer
options have been incorrectly added so that the printed command fails
when run separately. This change makes the displayed command run as
intended.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is a preparatory patch to make the following patch less cluttered. The
only visible change made here is to not print extra spaces when either or
both --note or --disable-shim-lock are not given and to not print an extra
space at the end of the command. The latter is done by constructing the
trailing argument string with spaces in front of each argument rather than
trailing. The allocation of the argument string is made precise, which has
the benefit of saving a few bytes, but more importantly self-documenting
what the needed allocated bytes are. Also, unneeded braces are removed from
an if block.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It turns out that setting $xen_version in linux_entry_xsm() override
$xen_version in the loop over $reverse_sorted_xen_list. This means
that only one entry per Xen version is going to enable XSM, but all
further entries are going to have "(XSM enabled)" in their titles
without enabling XSM.
When a "xenpolicy-$xen_version" file was found for the current
$xen_version, it would overwrite $xen_version to add "(XSM enabled)" to
the menu entry title. Once updated, the next call to linux_entry_xsm()
would also have this modified $xen_version and would look for the file
"xenpolicy-*(XSM enabled)" and fail.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
