Using grub_strncpy() instead of grub_snprintf() is less overhead and
indicates clearly that the dest should be the same string as the source.
Also fix indentation.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These are currently always the same as PRI*GRUB_UINT64_T, but they may
not be in the future.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Also add parenthesis to nested ternary operator to improve clarity.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Python bytecode files, which end in .pyc, may be generated by the build
system as needed and should not go into the git repository.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When creating at runtime a newc initrd via arguments to initrd with "newc:"
prefixes, only emit a directory path record once. The original code
intended to do that by bailing out of emitting the record when the record
to be created matches an existing record. However, this does not happen
because grub_memcmp() is improperly checked.
Generating duplicate newc directory records does not cause any problems
because the Linux unpacker will skip it once it sees the directory already
exists. This fix saves a little processing and makes the generated newc
cpio archive a little smaller.
Fixes: 92750e4c60 (Add ability to generate newc additions on runtime.)
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
EFI status codes are of different classes depending on the first byte and
all error status codes defined in appendix D of the main spec start from
1 and have the high bit set. When printing as a uint, the decimal is a very
large number that needs have the high bit cleared get the spec error code.
This can be easily visually done by a human if the number is printed as hex.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Small set of wording and grammatical edits which did not make it in time
for the original review of the chapter.
Signed-off-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Most of leftover code blindly assumes GRUB_RELOCATOR_FIRMWARE_REQUESTS_QUANT
divisibility by 8. So, enforce this at compile time.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
So all we did with the surface in SDL1 was split into window,
surface, renderer and texture. Instead of drawing into the
surface and then flipping, you build your pixels, then update
a texture and then copy the texture to the renderer.
Here we use an empty RGB surface to hold our pixels, which enables
us to keep most of the code the same. The SDL1 code has been adjusted
to refer to "surface" instead of "window" when trying to access the
properties of the surface.
This approaches the configuration by adding a new --enable-grub-emu-sdl2
argument. If set to yes, or auto detected, it disables SDL1 support
automatically.
This duplicates the sdl module block in Makefile.core.def which may
be something to be aware of, but we also don't want to build separate
module.
Fixes: https://bugs.debian.org/1038035
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These should be quite obvious and will make the SDL2 patch easier
to read then doing it inline there.
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently booting the system is prevented when call to EFI firmware
hash_log_extend_event() returns unknown error. Solve this by following
convention used in commit a4356538d (commands/tpm: Don't propagate
measurement failures to the verifiers layer).
Let the system to be bootable by default when unknown TPM error is
encountered. Check environment variable tpm_fail_fatal to fallback to
previous behaviour.
Signed-off-by: Michał Grzelak <mchl.grzlk@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently bootstrap complains in the following way when
patching gnulib files:
patching file argp-help.c
Hunk #1 succeeded at 52 (offset 1 line).
Hunk #2 succeeded at 1548 (offset 115 lines).
patching file mbswidth.c
patching file mbswidth.h
Hunk #1 succeeded at 40 (offset -5 lines).
Let's fix it by amending line numbers in the patch.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Alec Brown <alec.r.brown@oracle.com>
The commit bb4aa6e06 (efi: Drop all uses of efi_call_XX() wrappers) did
not add some __grub_efi_api attributes to the EFI calls. Lack of them
led to hangs on x86_64-efi target. So, let's add missing __grub_efi_api
attributes.
Fixes: bb4aa6e06 (efi: Drop all uses of efi_call_XX() wrappers)
Reported-by: Christian Hesse <list@eworm.de>
Reported-by: Robin Candau <antiz@archlinux.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Robin Candau <antiz@archlinux.org>
Tested-by: Christian Hesse <list@eworm.de>
Reviewed-by: Peter Jones <pjones@redhat.com>
Move the constant from grub-core/osdep/linux/getroot.c to
include/grub/disk.h and then reuse it in place of the
hardcoded 1024 limit in diskfilter.
Fixes: 2a5e3c1f2 (disk/diskfilter: Don't make a RAID array with more than 1024 disks)
Cc: Daniel Axtens <dja@axtens.net>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A working GRUB cannot be built with upcoming binutils and GCC, because linker
relaxation was added [1] causing new unsupported relocations to appear in modules.
So we pass -mno-relax to GCC if it is supported, to disable relaxation and make
GRUB forward-compatible with new toolchains.
While similar code already exists for sparc64 in configure.ac, sparc64 sets
LDFLAGS while LoongArch requires CFLAGS to be set. If we only set LDFLAGS on
LoongArch, GCC will still generate relaxation relocations in the .o files, so
the sparc64 code cannot be reused.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=56576f4a722b7398d35802ecf7d4185c27d6d69b
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the relocation documentation, the following function names are
renamed to show their exact meaning:
- from grub_loongarch64_xxx64_hi12() to grub_loongarch64_abs64_hi12(),
- from grub_loongarch64_xxx64_hi12() to grub_loongarch64_abs64_lo20().
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We already have the pc variable, no need to calculate it again.
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Use PRIxGRUB_INT64_T format specifier for grub_int64_t type
and drop redundant casts.
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the ACPI specification, in ACPI 2.0 or later, an
ACPI-compatible OS must use the XSDT if present. So, we should
use xsdt_addr instead of rsdt_addr if xsdt_addr is valid.
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the ACPI specification, in ACPI 2.0 or later, an
ACPI-compatible OS must use the XSDT if present. So, we should
use xsdt_addr instead of rsdt_addr if xsdt_addr is valid.
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Implemented a boundary check before advancing the allocation
descriptors pointer.
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Debugging GRUB can be tricky and require arcane knowledge. This will
help those unfamiliar with the process to get started debugging GRUB
with less effort.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While performing fuzz testing with XFS filesystem images with ASAN
enabled, several issues were found where the memory accesses are made
beyond the data that is allocated into the struct grub_xfs_data
structure's data field.
The existing structure didn't store the size of the memory allocated into
the buffer in the data field and had no way to check it. To resolve these
issues, the data size is stored to enable checks into the data buffer.
With these checks in place, the fuzzing corpus no longer cause any crashes.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Signed-off-by: Marta Lewandowska <mlewando@redhat.com>
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Ensure the generated unidata.c file is deterministic by sorting the
keys of the dict.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The output in moddep.lst generated from syminfo.lst using genmoddep.awk
is not deterministic since the order of the dependencies on each line
can vary depending on how awk sorts the values in the array.
Be deterministic in the output by sorting the dependencies on each line.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The output of the SOURCES lines in grub-core/Makefile.core.am, generated
from grub-core/Makefile.core.def with gentpl.py is not deterministic due to
missing sorting of the list used to generate it. Add such a sort.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
EFI firmware determines where to load the GRUB EFI at runtime, and so the
addresses of debug symbols are not known ahead of time. There is a command
defined in the gdb_grub script which will load the debug symbols at the
appropriate addresses, if given the application load address for GRUB.
So add a command named "gdbinfo" to allow the user to print this GDB command
string with the application load address on-demand. For the outputted GDB
command to have any effect when entered into a GDB session, GDB should have
been started with the script as an argument to the -x option or sourced into
an active GDB session before running the outputted command.
Documentation for the gdbinfo command is also added.
Co-developed-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI chainloader checks that a device path can be created for the $root
device before allowing chainloading to a given file. This is probably to
ensure that the given file can be accessed and loaded by the firmware.
However, since GRUB is loading the image itself, the firmware need not
be able to access the file location of the image. So remove this check.
Also, this fixes an issue where chainloading an image file on a location
that is accessible by the firmware, e.g. (hd0,1)/efi/boot.efi, would
fail when root is a location inaccessible by the firmware, e.g. memdisk.
Use GRUB_EFI_BYTES_TO_PAGES() instead of doing the calculation explicitly.
Add comment noting the section where the load options for the chainloaded
EFI application is constructed.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Extra arguments given to chainloader on EFI platforms will be sent to
the chainloaded application. Also, minor edit in the chainloading section
to note that chainloading can be a jump via the firmware and not
necessarily in real mode (which does not exist on some architectures).
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new configuration drop-in file that loads the bli module and runs
the command if booting on the EFI platform.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new module named bli. It implements a small but quite useful part
of the Boot Loader Interface [0]. This interface uses EFI variables for
communication between the boot loader and the operating system.
When loaded, this module sets two EFI variables under the vendor GUID
4a67b082-0a4c-41cf-b6c7-440b29bb8c4f:
- LoaderInfo: contains GRUB + <version number>.
This allows the running operating system to identify the boot loader
used during boot.
- LoaderDevicePartUUID: contains the partition UUID of the EFI System
Partition (ESP). This is used by systemd-gpt-auto-generator [1] to
find the root partitions (and others too), via partition type IDs [2].
This module is available on EFI platforms only. The bli module relies on
the part_gpt module which has to be loaded beforehand to make the GPT
partitions discoverable.
Update the documentation, add a new chapter "Modules" and describe the
bli module there.
[0] https://systemd.io/BOOT_LOADER_INTERFACE/
[1] https://www.freedesktop.org/software/systemd/man/systemd-gpt-auto-generator.html
[2] https://uapi-group.org/specifications/specs/discoverable_partitions_specification/
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add checks for NULL pointers to grub_device_close() and
grub_disk_close() to make these functions more robust.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reword some section headings, remove "The List of" from titles. While
grammatically correct, this phrase can be omitted to increase
readability, especially in the table of contents.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a function that sets an EFI variable to a string value.
The string is converted from UTF-8 to UTF-16.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Create a new function for UTF-8 to UTF-16 conversion called
grub_utf8_to_utf16_alloc() in the grub-code/kern/misc.c and replace
charset conversion code used in some places in the EFI code. It is
modeled after the grub_utf8_to_ucs4_alloc() like functions in
include/grub/charset.h. It can't live in include/grub/charset.h,
because it needs to be reachable from the kern/efi code.
Add a check for integer overflow and remove redundant NUL-termination.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the same way as GRUB_SIZE_MAX, add GRUB_SSIZE_MAX.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Use the new printf format specifier %pG.
Fixes the text representation of GUIDs in the output of the lsefisystab
command (missing 4th dash).
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Extend the printf format specifier for pointers (%p) to accept a suffix
specifier G to print GUIDs: %pG can be used to print grub_guid structs.
This does not interfere with the -Wformat checking of gcc. Note that
the data type is not checked though (%p accepts void *).
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are 3 implementations of a GUID in GRUB. Replace them with
a common one, placed in types.h.
It uses the "packed" flavor of the GUID structs, the alignment attribute
is dropped, since it is not required.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a function to the EFI module that allows setting EFI variables
with specific attributes.
This is useful for marking variables as volatile, for example.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/kern/efi/mm.c, grub_efi_finish_boot_services() has an instance
where the memory for the variable finish_mmap_buf is freed, but on the next
iteration of a while loop, grub_efi_get_memory_map() uses finish_mmap_buf. To
prevent this, we can set finish_mmap_buf to NULL after the free.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI spec mandates that the handle produced by the LoadImage boot
service has a LoadedImage protocol instance installed on it, but for
robustness, we should still deal with a NULL return value from the
helper routine that obtains this protocol pointer.
If this happens, don't try to start the image but unload it and return
an error.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Switch the x86 based EFI platform builds to the generic EFI loader,
which exposes the initrd via the LoadFile2 protocol instead of the
x86-specific setup header. This will launch the Linux kernel via its EFI
stub, which performs its own initialization in the EFI boot services
context before calling ExitBootServices() and performing the bare metal
Linux boot.
Given that only Linux kernel versions v5.8 and later support this initrd
loading method, the existing x86 loader is retained as a fallback, which
will also be used for Linux kernels built without the EFI stub. In this
case, GRUB calls ExitBootServices() before entering the Linux kernel,
and all EFI related information is provided to the kernel via struct
boot_params in the setup header, as before.
Note that this means that booting EFI stub kernels older than v5.8 is
not supported even when not using an initrd at all. Also, the EFI
handover protocol, which has no basis in the UEFI specification, is not
implemented.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The call wrappers are no longer needed now that GCC can generate
function calls using MS calling convention, so let's get rid of them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
