This allows seeing full QEMU output of grub-shell, which can be invaluable
when debugging failing tests.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When running tests there are many invocations of grub-shell, and because
the output files are all random names in the same tmp directory, it
becomes more work to figure out which files went with which grub-shell
invocations. So all generated files from one invocation of grub-shell
are put into a randomly named directory, so as not to collide with other
grub-shell invocations. And now that the generated files can be put in
a location where they will not get stepped on, and they can be named
sensible names.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In some filesystem utils like mksquashfs, they will silently change
behaviour and cause timestamps to unexpectedly change. Build
environments like Debian's set SOURCE_DATE_EPOCH in the environment,
so remove it. Reproducible builds are good and useful for shipped
artifacts, but this causes build-time tests to fail.
Signed-off-by: Steve McIntyre <steve@einval.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The previous behavior ignored an error and the output from grub-mkrescue.
This made it difficult to discover that grub-mkrescue was the reason that
tests which rely on grub-shell were failing. Even after discovering
grub-mkrescue was the culprit, there was no output to indicate why it was
failing. It turns out that grub-mkrescue is a thin wrapper around xorriso.
So if you do not have xorriso installed it will fail with an error message
about not being able to find xorriso.
This change will allow grub-mkrescue output to be written to stderr, only
if grub-mkrescue fails. If grub-mkrescue succeeds, there will be no output
from grub-mkrescue so as not to interfere with the functioning of tests.
This change should have no effect on the running of tests or other uses of
grub-shell as it only modifies the error path.
Also, if grub-mkrescue fails, the script exits early. Since grub-shell
needs the ISO image created by grub-mkresue to boot the QEMU instance,
a failure here should be considered fatal.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
By using shell variable that are set once by the expansion of an autoconf
variable, the resulting shell script is more easily moved and modified
from the build/install directory it was generated for. The resulting
script is more readable as well.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This breaks the tests on pseries - just restrict it to x86 platforms
that don't specify an EFI.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On failure, the hfs test should show both the host and GRUB determined fs
UUID. Prior to this change, both outputs where generated by GRUB, which is
less helpful in determining the cause of failure.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
ZFS file systems are not unmounted using umount, but instead by exporting
them. So export the ZFS file system that has the same label as the one that
was created during the test, if such one exists. This is required to delete
the loopback device that uses the ZFS image file. Otherwise the added code
to delete all loopback devices setup during the test run will never be able
to finish because the loopback device can not be deleted while in use.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When all tests complete successfully, filesystems mounted by grub-fs-tester
will be unmounted before exiting. However, on certain test failures the
tester will exit with a failure code and not unmount previously mounted
filesystems. Now keep track of mounts and umounts and run an exit handler
on exit or process interruption that will umount all mounts that haven't
already been unmounted.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Instead of "tmp" the name is prefixed by the name of the scripts (e.g.
grub-fs-tester). A timestamp is added in the name to allow for easily
seeing a chronological sorting of runs and the name of the filesystem
being tested. The random component is set to the minimal possible,
3 characters, because the timestamp should provide enough uniqueness.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using the blkid cache can cause issues when running many file system tests
in parallel. We do not need it, as its only there to improve performance,
and using the cache does not provide significant performance improvements.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This bashism allows converting NUM in base BASE to decimal. Its not needed
because the only place its used is to convert from hexidecimal and this can
also be done with the more portable $((0xHEXNUM)) syntax.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The iso9660 tests test creating isos with different combinations of
Joliet, Rock Ridge, and ISO 9660 conformance level. Refactor xorriso
argument generation for more readability and extensibility.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A recent refactoring of CUDA command code has exposed a bug in OpenBIOS [1]
which was causing system powerdown and system reset to fail, thus causing
the QEMU instance to hang. This in turn caused the grub-shell command to
timeout causing it to return an error code when the test actually completed
successfully.
Since it could be a while before the patch fixing this issue in OpenBIOS
filters down to the average distro, switch to PMU to allow powerdowns and
reboots to work as expected.
[1] https://gitlab.com/qemu-project/qemu/-/issues/624
Signed-off-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The filesystem images created for the filesystem test can be useful when
debugging why a filesystem test failed. So, keep them around and let the
user clean them up.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The ";", semi-colon, character is not a valid character for a FAT filesystem
label. This test used to succeed because prior to v4.2 of dosfstools
mkfs.vfat did not enforce the character restrictions for volume labels. So,
change the volume label string to be valid but contain symbol characters to
test odd volume labels.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Apparently there used to be a -B option for mkfs.minix to create a volume
with a specified block size. This version is hard to come by and does not
appear to be available in Debian distributions. So, remove support for
testing a variety of blocks sizes for MINIX3. This allows the MINIX tests
to run because they were being skipped due to not finding a mkfs.minix with
the -B option.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When a test program fails because it failed to setup the test properly, this
does not indicate a failure in what is attempting to be tested because the
test is never run. So exit with a hard error exit status to note this
difference. This will allow easier detection of tests that are not actually
being run and those that are really failing.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently, the filesystem timestamp check in grub-fs-tester uses the
squashfs image file's last modified timestamp and checks to see if that
time stamp is within 3 seconds of the superblock timestamp as determined by
grub. The image file's timestamp could be more than 3 seconds off if
mksquashfs takes more than 3 seconds to generate the image, as is the case
on a virtual machine. Instead use squashfs tools to get the filesystem
timestamp directly.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The test for the ability to decompress zisofs encoded files is supposed
to fail due to the lack of this ability in GRUB. But it fails early with
xorriso : FAILURE : -volid: Text too long (1650 > 32)
because "ziso9660" is not in the list of filesystems which accept at most
32 bytes in their FSLABEL. If this is fixed, the test returns false
success because the xorriso run does not produce any zisofs compressed
files. The problem is in the sequence of native xorriso commands used.
The command -set_filter_r applies only to the files which are already
inserted into the emerging ISO filesystem. In the current sequence no
files have been inserted yet by command -add when the last of two
-set_filter_r commands is executed. After this is corrected, xorriso
refuses to work because the global settings of command -zisofs can be
made only before command -set_filter_r has attached zisofs filters to
the data files in the emerging ISO. Further: A bug in xorriso causes
a false warning about FSLABEL being too long for Joliet. Shortcomings
of Joliet cause warnings about symbolic links. Such warnings might
distract from the actual reason why the test is expected to fail.
So, add "ziso9660" to the 32-byte FSLABEL list.
Fix the xorriso run to produce compressed files which for now cause
righteous failure of the test. Do this by removing a surplus group of
-set_filter_r and -zisofs commands, by moving the other such group
behind -add, and by swapping -set_filter_r and -zisofs.
Remove the -as mkisofs options which produce a Joliet filesystem tree.
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The iso9660_test fails if the effective locale is not UTF-8. This happens
because xorriso needs to convert file names and FSLABEL to UCS-2 when
preparing a Joliet tree. The grub-fs-tester obviously intends to use UTF-8
as character set, but xorriso assumes by default the result of nl_langinfo(3)
with item CODESET. So, override the result of nl_langinfo(CODESET) by options
of xorriso -as mkisofs.
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
LODEVICES is not an array variable and should not be accessed as such.
This allows the f2fs test to pass as it was failing because a device
name had a space prepended to the path.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
- Adds zstd support to the btrfs module.
- Adds a test case for btrfs zstd support.
- Changes top_srcdir to srcdir in the btrfs module's lzo include
following comments from Daniel Kiper about the zstd include.
Tested on Ubuntu-18.04 with a btrfs /boot partition with and without zstd
compression. A test case was also added to the test suite that fails before
the patch, and passes after.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
SeaBIOS 1.11.0 added support for VGA emulation over a serial port, which
interferes with grub-shell. Turn it off.
Signed-off-by: Colin Watson <cjwatson@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If something else on the system is using loopback devices, then the
device that's free at the call to `losetup -f` may not be free in the
following call to try to use it. Instead, find and use the first free
loopback device in a single call to losetup.
Signed-off-by: Will Thompson <wjt@endlessm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
"F2FS (Flash-Friendly File System) is flash-friendly file system which was merged
into Linux kernel v3.8 in 2013.
The motive for F2FS was to build a file system that from the start, takes into
account the characteristics of NAND flash memory-based storage devices (such as
solid-state disks, eMMC, and SD cards).
F2FS was designed on a basis of a log-structured file system approach, which
remedies some known issues of the older log structured file systems, such as
the snowball effect of wandering trees and high cleaning overhead. In addition,
since a NAND-based storage device shows different characteristics according to
its internal geometry or flash memory management scheme (such as the Flash
Translation Layer or FTL), it supports various parameters not only for
configuring on-disk layout, but also for selecting allocation and cleaning
algorithm.", quote by https://en.wikipedia.org/wiki/F2FS.
The source codes for F2FS are available from:
http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs.githttp://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git
This patch has been integrated in OpenMandriva Lx 3.
https://www.openmandriva.org/
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On such a filesystem, inodes may have EXT4_ENCRYPT_FLAG set.
For a regular file, this means its contents are encrypted; for a
directory, this means the filenames in its directory entries are
encrypted; and for a symlink, this means its target is encrypted. Since
GRUB cannot decrypt encrypted contents or filenames, just issue an error
if it would need to do so. This is sufficient to allow unencrypted boot
files to co-exist with encrypted files elsewhere on the filesystem.
(Note that encrypted regular files and symlinks will not normally be
encountered outside an encrypted directory; however, it's possible via
hard links, so they still need to be handled.)
Tested by booting from an ext4 /boot partition on which I had run
'tune2fs -O encrypt'. I also verified that the expected error messages
are printed when trying to access encrypted directories, files, and
symlinks from the GRUB command line. Also ran 'sudo ./grub-fs-tester
ext4_encrypt'; note that this requires e2fsprogs v1.43+ and Linux v4.1+.
Signed-off-by: Eric Biggers <ebiggers@google.com>
1. Make sure files are not multiple of block size. This will ensure tail packing
for squash4 and may also trigger more codes paths in other filesystems.
2. Call mksquashfs with -always-use-fragments to force tail packing.
proot creates hidden files with .proot prefix and name
derived from real file name. So decrease file name length
and path depth. For some reason depth 85 also results in
undeleteable directory, so use 84 instead of 85.
