On PowerVM, the first time we boot a Linux partition, we may only get
256MB of real memory area, even if the partition has more memory.
This isn't enough to reliably verify a kernel. Fortunately, the Power
Architecture Platform Reference (PAPR) defines a method we can call to ask
for more memory: the broad and powerful ibm,client-architecture-support
(CAS) method.
CAS can do an enormous amount of things on a PAPR platform: as well as
asking for memory, you can set the supported processor level, the interrupt
controller, hash vs radix mmu, and so on.
If:
- we are running under what we think is PowerVM (compatible property of /
begins with "IBM"), and
- the full amount of RMA is less than 512MB (as determined by the reg
property of /memory)
then call CAS as follows: (refer to the Linux on Power Architecture
Reference, LoPAR, which is public, at B.5.2.3):
- Use the "any" PVR value and supply 2 option vectors.
- Set option vector 1 (PowerPC Server Processor Architecture Level)
to "ignore".
- Set option vector 2 with default or Linux-like options, including a
min-rma-size of 512MB.
- Set option vector 3 to request Floating Point, VMX and Decimal Floating
point, but don't abort the boot if we can't get them.
- Set option vector 4 to request a minimum VP percentage to 1%, which is
what Linux requests, and is below the default of 10%. Without this,
some systems with very large or very small configurations fail to boot.
This will cause a CAS reboot and the partition will restart with 512MB
of RMA. Importantly, grub will notice the 512MB and not call CAS again.
Notes about the choices of parameters:
- A partition can be configured with only 256MB of memory, which would
mean this request couldn't be satisfied, but PFW refuses to load with
only 256MB of memory, so it's a bit moot. SLOF will run fine with 256MB,
but we will never call CAS under qemu/SLOF because /compatible won't
begin with "IBM".)
- unspecified CAS vectors take on default values. Some of these values
might restrict the ability of certain hardware configurations to boot.
This is why we need to specify the VP percentage in vector 4, which is
in turn why we need to specify vector 3.
Finally, we should have enough memory to verify a kernel, and we will
reach Linux. One of the first things Linux does while still running under
OpenFirmware is to call CAS with a much fuller set of options (including
asking for 512MB of memory). Linux includes a much more restrictive set of
PVR values and processor support levels, and this CAS invocation will likely
induce another reboot. On this reboot grub will again notice the higher RMA,
and not call CAS. We will get to Linux again, Linux will call CAS again, but
because the values are now set for Linux this will not induce another CAS
reboot and we will finally boot all the way to userspace.
On all subsequent boots, everything will be configured with 512MB of RMA,
so there will be no further CAS reboots from grub. (phyp is super sticky
with the RMA size - it persists even on cold boots. So if you've ever booted
Linux in a partition, you'll probably never have grub call CAS. It'll only
ever fire the first time a partition loads grub, or if you deliberately lower
the amount of memory your partition has below 512MB.)
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
On EFI platforms where EFI calls do not require a wrapper (notably i386-efi
and arm64-efi), the func argument needs to be wrapped in parenthesis to
allow valid syntax when func is an expression which evaluates to a function
pointer. On EFI platforms that do need a wrapper, this was never an issue
because func is passed to the C function wrapper as an argument and thus
does not need parenthesis to be evaluated.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The disk sector size provided by sysfs file system considers the sector
size of 512 irrespective of disk sector size, thus causing the read by
the GRUB to an incorrect offset from what was originally intended.
Considering the 512 sector size of sysfs data the actual sector needs to
be modified corresponding to disk sector size.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.vnet.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We currently rely on some pretty fragile comparison by name to
identify whether a serial port being configured is identical
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The various functions to add a port used to return port->name, and
the callers would immediately iterate all registered ports to "find"
the one just created by comparing that return value with ... port->name.
This is a waste of cycles and code. Instead, have those functions
return "port" directly.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It is common for PCI based UARTs to use larger than one byte access
sizes. This adds support for this and uses the information present
in SPCR accordingly.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
"serial auto" is now equivalent to just "serial" and will use the
SPCR to discover the port if present, otherwise defaults to "com0"
as before.
This allows to support MMIO ports specified by ACPI which is needed
on AWS EC2 "metal" instances, and will enable GRUB to pickup the
port configuration specified by ACPI in other cases.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This will allow ports to be added with a pre-set configuration.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
And while at it, unify it as clock frequency in Hz, to match the value in
grub_serial_config struct and do the division by 16 in one common place.
This will simplify adding SPCR support.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds the ability for the driver to access UARTs via MMIO instead
of PIO selectively at runtime, and exposes a new function to add an
MMIO port.
In an ideal world, MMIO accessors would be generic and have architecture
specific memory barriers. However, existing drivers don't have them and
most of those "bare metal" drivers tend to be for x86 which doesn't need
them. If necessary, those can be added later.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds the definition of the two ACPI tables according to the spec.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
And convert grub_acpi_find_fadt() to use it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The out->ncomb is a bit-field of 8 bits. So, the max possible value is 255.
However, code in grub_unicode_aglomerate_comb() doesn't check for an
overflow when incrementing out->ncomb. If out->ncomb is already 255,
after incrementing it will get 0 instead of 256, and cause illegal
memory access in subsequent processing.
This patch introduces GRUB_UNICODE_NCOMB_MAX to represent the max
acceptable value of ncomb. The code now checks for this limit and
ignores additional combining characters when limit is reached.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Expressions like u64 = u32 * u32 are unsafe because their products are
truncated to u32 even if left hand side is u64. This patch fixes all
problems like that one in fbutil.
To get right result not only left hand side have to be u64 but it's also
necessary to cast at least one of the operands of all leaf operators of
right hand side to u64, e.g. u64 = u32 * u32 + u32 * u32 should be
u64 = (u64)u32 * u32 + (u64)u32 * u32.
For 1-bit bitmaps grub_uint64_t have to be used. It's safe because any
combination of values in (grub_uint64_t)u32 * u32 + u32 expression will
not overflow grub_uint64_t.
Other expressions like ptr + u32 * u32 + u32 * u32 are also vulnerable.
They should be ptr + (grub_addr_t)u32 * u32 + (grub_addr_t)u32 * u32.
This patch also adds a comment to grub_video_fb_get_video_ptr() which
says it's arguments must be valid and no sanity check is performed
(like its siblings in grub-core/video/fb/fbutil.c).
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The length of memory allocation and file read may overflow. This patch
fixes the problem by using safemath macros.
There is a lot of code repetition like "(x * y + 7) / 8". It is unsafe
if overflow happens. This patch introduces grub_video_bitmap_calc_1bpp_bufsz().
It is safe replacement for such code. It has safemath-like prototype.
This patch also introduces grub_cast(value, pointer), it casts value to
typeof(*pointer) then store the value to *pointer. It returns true when
overflow occurs or false if there is no overflow. The semantics of arguments
and return value are designed to be consistent with other safemath macros.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add an include on stdbool.h, making the bool type generally available
within the GRUB without needing to add a file-specific include every
time it would be used.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GRUB emulator is used as a debugging utility but it could also be
used as a user-space bootloader if there is support to boot an operating
system.
The Linux kernel is already able to (re)boot another kernel via the
kexec boot mechanism. So the grub-emu tool could rely on this feature
and have linux and initrd commands that are used to pass a kernel,
initramfs image and command line parameters to kexec for booting
a selected menu entry.
By default the systemctl kexec option is used so systemd can shutdown
all of the running services before doing a reboot using kexec. But if
this is not present, it can fall back to executing the kexec user-space
tool directly. The ability to force a kexec-reboot when systemctl kexec
fails must only be used in controlled environments to avoid possible
filesystem corruption and data loss.
Signed-off-by: Raymund Will <rw@suse.com>
Signed-off-by: John Jolly <jjolly@suse.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/video/readers/jpeg.c, the height and width of a JPEG image don't
have an upper limit for how big the JPEG image can be. In Coverity, this is
getting flagged as an untrusted loop bound. This issue can also seen in PNG and
TGA format images as well but Coverity isn't flagging it. To prevent this, the
constant IMAGE_HW_MAX_PX is being added to include/grub/bitmap.h, which has
a value of 16384, to act as an artificial limit and restrict the height and
width of images. This value was picked as it is double the current max
resolution size, which is 8K.
Fixes: CID 292450
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recent Linux kernels will invoke the LoadFile2 protocol installed on
a well-known vendor media path to load the initrd if it is exposed by
the firmware. Using this method is preferred for two reasons:
- the Linux kernel is in charge of allocating the memory, and so it can
implement any placement policy it wants (given that these tend to
change between kernel versions),
- it is no longer necessary to modify the device tree provided by the
firmware.
So let's install this protocol when handling the "initrd" command if
such a recent kernel was detected (based on the PE/COFF image version),
and defer loading the initrd contents until the point where the kernel
invokes the LoadFile2 protocol.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When GRUB runs on top of EFI firmware, it only has access to block and
network device abstractions exposed by the firmware, and it is up to the
firmware to quiesce the underlying hardware when exiting boot services
and handing over to the OS.
This is especially important for network devices, to prevent incoming
packets from being DMA'd straight into memory after the OS has taken
over but before it has managed to reconfigure the network hardware.
GRUB handles this by means of the grub_net_fini_hw() preboot hook, which
is executed before calling into the booted image. This means that all
network devices disappear or become inoperable before the EFI stub
executes on EFI targeted builds. This is problematic as it prevents the
EFI stub from calling back into GRUB provided protocols such as
LoadFile2 for the initrd, which we will provide in a subsequent patch.
So add a flag that indicates to the network core that EFI network
devices should not be closed when grub_net_fini_hw() is called.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Xen has its own version of the image header, to account for the
additional PE/COFF header fields. Since we are adding references to
those in the shared EFI loader code, update the common definitions
and drop the Xen specific one which no longer has a purpose.
Since in both cases, the call to grub_arch_efi_linux_check_image() is
preceded by a load of the image header, let's move the load into that
function, and rename it to grub_arch_efi_linux_load_image_header().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The PE/COFF spec permits the COFF signature and file header to appear
anywhere in the file, and the actual offset is recorded in 4 byte
little endian field at offset 0x3c of the image.
When GRUB is emitted as a PE/COFF binary, we reuse the 128 byte MS-DOS
stub (even for non-x86 architectures), putting the COFF signature and
file header at offset 0x80. However, other PE/COFF images may use
different values, and non-x86 Linux kernels use an offset of 0x40
instead.
So let's get rid of the grub_pe32_header struct from pe32.h, given that
it does not represent anything defined by the PE/COFF spec. Instead,
introduce a minimal struct grub_msdos_image_header type based on the
PE/COFF spec's description of the image header, and use the offset
recorded at file position 0x3c to discover the actual location of the PE
signature and the COFF image header.
The remaining fields are moved into a struct grub_pe_image_header,
which we will use later to access COFF header fields of arbitrary
images (and which may therefore appear at different offsets)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
After doing some validation with clang from versions 3.8 and up, the
builds prior to version 8.0.0 fail due to the use of safemath functions
at link time.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The recent gnulib updates require an implementation of abort(), but the
current macro provided by changeset:
cd37d3d3916c gnulib: Drop no-abort.patch
to config.h.in does not work with the clang compiler since it doesn't
provide a __builtin_trap() implementation, so this element of the
changeset needs to be reverted, and replaced.
After some discussion with Vladimir 'phcoder' Serbinenko and Daniel Kiper
it was suggested to bring back in the change from the changeset:
db7337a3d353 * grub-core/gnulib/regcomp.c (regerror): ...
Which implements abort() as an inline call to grub_abort(), but since
that was made static by changeset:
a8f15bceeafe * grub-core/kern/misc.c (grub_abort): Make static
it is also necessary to revert the specific part that makes it a static
function too.
Another implementation of abort() was found in grub-core/kern/compiler-rt.c
which needs to also be removed to be consistent.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A user can now specify UUID strings with dashes, instead of having to remove
dashes. This is backwards-compatibility preserving and also fixes a source
of user confusion over the inconsistency with how UUIDs are specified
between file system UUIDs and cryptomount UUIDs. Since cryptsetup, the
reference implementation for LUKS, displays and generates UUIDs with dashes
there has been additional confusion when using the UUID strings from
cryptsetup as exact input into GRUB does not find the expected cryptodisk.
A new function grub_uuidcasecmp() is added that is general enough to be used
other places where UUIDs are being compared.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allow treating util/grub-module-verifierXX.c as a file you can build
directly so syntax checkers like vim's "syntastic" plugin, which uses
"gcc -x c -fsyntax-only" to build it, will work.
One still has to do whatever setup is required to make it pick the
right include dirs, which -I options we use, etc., but this makes
it so you can do the checking on the file you're editing, rather
than on a different file.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI_CONFORMANCE_PROFILES_TABLE_GUID is used for a table of GUIDs for conformance
profiles (cf. UEFI specification 2.10, 4.6.5 EFI_CONFORMANCE_PROFILE_TABLE).
The lsefisystab command is used to display installed EFI configuration tables.
Currently it only shows the GUID but not a short text for the table.
Provide a short text for the EFI_CONFORMANCE_PROFILES_TABLE_GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The register_key_notify() method should have an output parameter which is
a pointer to the unique handle assigned to the registered notification.
Signed-off-by: Li Gen <ligenlive@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the case of an error grub_initrd_load() uses argv[] to print the
filename that caused the error. It is also possible to obtain the
filename from the file handles and there is no need to duplicate that
information in argv[], so let's drop it.
Signed-off-by: Nikita Ermakov <arei@altlinux.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In bsdXX.c and multiboot_elfxx.c, e_phnum is used to obtain the number of
program header table entries, but it wasn't being checked if the value was
there.
According to the elf(5) manual page,
"If the number of entries in the program header table is larger than or equal to
PN_XNUM (0xffff), this member holds PN_XNUM (0xffff) and the real number of
entries in the program header table is held in the sh_info member of the
initial entry in section header table. Otherwise, the sh_info member of the
initial entry contains the value zero."
Since this check wasn't being made, grub_elfXX_get_phnum() is being added to
elfXX.c to make this check and use e_phnum if it doesn't have PN_XNUM as a
value, else use sh_info. We also need to make sure e_phnum isn't greater than
PN_XNUM and sh_info isn't less than PN_XNUM.
Note that even though elf.c and elfXX.c are located in grub-core/kern, they are
compiled as modules and don't need the EXPORT_FUNC() macro to define the functions
in elf.h.
Also, changed casts of phnum to match variables being set as well as dropped
casts when unnecessary.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In multiboot_elfxx.c, e_shstrndx is used to obtain the section header table
index of the section name string table, but it wasn't being checked if the value
was there.
According to the elf(5) manual page,
"If the index of section name string table section is larger than or equal to
SHN_LORESERVE (0xff00), this member holds SHN_XINDEX (0xffff) and the real
index of the section name string table section is held in the sh_link member of
the initial entry in section header table. Otherwise, the sh_link member of the
initial entry in section header table contains the value zero."
Since this check wasn't being made, grub_elfXX_get_shstrndx() is being added to
elfXX.c to make this check and use e_shstrndx if it doesn't have SHN_XINDEX as a
value, else use sh_link. We also need to make sure e_shstrndx isn't greater than
or equal to SHN_LORESERVE and sh_link isn't less than SHN_LORESERVE.
Note that even though elf.c and elfXX.c are located in grub-core/kern, they are
compiled as modules and don't need the EXPORT_FUNC() macro to define the functions
in elf.h.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In bsdXX.c and multiboot_elfxx.c, e_shnum is used to obtain the number of
section header table entries, but it wasn't being checked if the value was
there.
According to the elf(5) manual page,
"If the number of entries in the section header table is larger than or equal to
SHN_LORESERVE (0xff00), e_shnum holds the value zero and the real number of
entries in the section header table is held in the sh_size member of the initial
entry in section header table. Otherwise, the sh_size member of the initial
entry in the section header table holds the value zero."
Since this check wasn't being made, grub_elfXX_get_shnum() is being added to
elfXX.c to make this check and use whichever member doesn't have a value of
zero. If both are zero, then we must return an error. We also need to make sure
that e_shnum doesn't have a value greater than or equal to SHN_LORESERVE and
sh_size isn't less than SHN_LORESERVE.
In order to get this function to work, the type ElfXX_Shnum is being added where
Elf32_Shnum defines Elf32_Word and Elf64_Shnum defines Elf64_Xword. This new
type is needed because if shnum obtains a value from sh_size, sh_size could be
of type El32_Word for Elf32_Shdr structures or Elf64_Xword for Elf64_Shdr
structures.
Note that even though elf.c and elfXX.c are located in grub-core/kern, they are
compiled as modules and don't need the EXPORT_FUNC() macro to define the functions
in elf.h.
For a few smaller changes, changed casts of shnum to match variables being set
as well as dropped casts when unnecessary and fixed spacing errors in bsdXX.c.
Also, shnum is an unsigned integer and is compared to int i in multiboot_elfxx.c,
it should be unsigned to match shnum.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Note this cast was fixed in grub_strcasecmp() in commit ce41ab7aab
(* grub-core/kern/misc.c (grub_strcmp): Use unsigned comparison as per
common usage and preffered in several parts of code.), but this commit
omitted fixing it in grub_strncasecmp().
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Coverity signaled 2 issues where the return value of grub_util_mkdir()
was not being tested.
The Windows variant of this code defines the function as having no
return value (void), but the UNIX variants all are mapped using a macro
to the libc mkdir() function, which returns an int value.
To be consistent, the mapping should cast to void to for these too.
Fixes: CID 73583
Fixes: CID 73617
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This command is meant to behave similarly to the "mode" command of the EFI
Shell application. In addition to allowing mode selection by giving the
number of columns and rows as arguments, the command allows specifying the
mode number to select the mode. Also supported are the arguments "min" and
"max", which set the mode to the minimum and maximum mode respectively as
calculated by the columns * rows of that mode.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI_CC_MEASUREMENT_PROTOCOL abstracts the measurement for virtual firmware
in confidential computing environment. It is similar to the EFI_TCG2_PROTOCOL.
It was proposed by Intel and ARM and approved by UEFI organization.
It is defined in Intel GHCI specification: https://cdrdv2.intel.com/v1/dl/getContent/726790 .
The EDKII header file is available at https://github.com/tianocore/edk2/blob/master/MdePkg/Include/Protocol/CcMeasurement.h .
Signed-off-by: Lu Ken <ken.lu@intel.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using the disk read hook mechanism, setup a read hook on the source disk
which will read from the given header file during the scan and recovery
cryptodisk backend functions. Disk read hooks are executed after the data
has been read from the disk. This is okay, because the read hook is given
the read buffer before its sent back to the caller. In this case, the hook
can then overwrite the data read from the disk device with data from the
header file sent in as the read hook data. This is transparent to the
read caller. Since the callers of this function have just opened the
source disk, there are no current read hooks, so there's no need to
save/restore them nor consider if they should be called or not.
This hook assumes that the header is at the start of the volume, which
is not the case for some formats (e.g. GELI). So GELI will return an
error if a detached header is specified. It also can only be used
with formats where the detached header file can be written to the
first blocks of the volume and the volume could still be unlocked.
So the header file can not be formatted differently from the on-disk
header. If these assumpts are not met, detached header file processing
must be specially handled in the cryptodisk backend module.
The hook will be called potentially many times by a backend. This is fine
because of the assumptions mentioned and the read hook reads from absolute
offsets and is stateless.
Also add a --header (short -H) option to cryptomount which takes a file
argument.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It will be desirable in the future to allow having the read hook modify the
data passed back from a read function call on a disk or file. This adds that
infrastructure and has no impact on code flow for existing uses of the read
hook. Also changed is that now when the read hook callback is called it can
also indicate what error code should be sent back to the read caller.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently, all platforms will set up their heap on initialization of the
platform code. While this works mostly fine, it poses some limitations
on memory management on us. Most notably, allocating big chunks of
memory in the gigabyte range would require us to pre-request this many
bytes from the firmware and add it to the heap from the beginning on
some platforms like EFI. As this isn't needed for most configurations,
it is inefficient and may even negatively impact some usecases when,
e.g., chainloading. Nonetheless, allocating big chunks of memory is
required sometimes, where one example is the upcoming support for the
Argon2 key derival function in LUKS2.
In order to avoid pre-allocating big chunks of memory, this commit
implements a runtime mechanism to add more pages to the system. When
a given allocation cannot be currently satisfied, we'll call a given
callback set up by the platform's own memory management subsystem,
asking it to add a memory area with at least "n" bytes. If this
succeeds, we retry searching for a valid memory region, which should
now succeed.
If this fails, we try asking for "n" bytes, possibly spread across
multiple regions, in hopes that region merging means that we end up
with enough memory for things to work out.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
In grub_memalign(), there's a commented section which would allow for
unloading of unneeded modules in case where there is not enough free
memory available to satisfy a request. Given that this code is never
compiled in, let's remove it together with grub_dl_unload_unneeded().
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
On x86_64-efi (at least) regions seem to be added from top down. The mm
code will merge a new region with an existing region that comes
immediately before the new region. This allows larger allocations to be
satisfied that would otherwise be the case.
On powerpc-ieee1275, however, regions are added from bottom up. So if
we add 3x 32MB regions, we can still only satisfy a 32MB allocation,
rather than the 96MB allocation we might otherwise be able to satisfy.
* Define 'post_size' as being bytes lost to the end of an allocation
due to being given weird sizes from firmware that are not multiples
of GRUB_MM_ALIGN.
* Allow merging of regions immediately _after_ existing regions, not
just before. As with the other approach, we create an allocated
block to represent the new space and the pass it to grub_free() to
get the metadata right.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
grub_mm_region_init() does:
h = (grub_mm_header_t) (r + 1);
where h is a grub_mm_header_t and r is a grub_mm_region_t.
Cells are supposed to be GRUB_MM_ALIGN aligned, but while grub_mm_dump
ensures this vs the region header, grub_mm_region_init() does not.
It's better to be explicit than implicit here: rather than changing
grub_mm_region_init() to ALIGN_UP(), require that the struct is
explicitly a multiple of the header size.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Patrick Steinhardt <ps@pks.im>
A malicious tftp server can cause UAFs and a double free.
An attempt to read from a network file is handled by grub_net_fs_read(). If
the read is at an offset other than the current offset, grub_net_seek_real()
is invoked.
In grub_net_seek_real(), if a backwards seek cannot be satisfied from the
currently received packets, and the underlying transport does not provide
a seek method, then grub_net_seek_real() will close and reopen the network
protocol layer.
For tftp, the ->close() call goes to tftp_close() and frees the tftp_data_t
file->data. The file->data pointer is not nulled out after the free.
If the ->open() call fails, the file->data will not be reallocated and will
continue point to a freed memory block. This could happen from a server
refusing to send the requisite ack to the new tftp request, for example.
The seek and the read will then fail, but the grub_file continues to exist:
the failed seek does not necessarily cause the entire file to be thrown
away (e.g. where the file is checked to see if it is gzipped/lzio/xz/etc.,
a read failure is interpreted as a decompressor passing on the file, not as
an invalidation of the entire grub_file_t structure).
This means subsequent attempts to read or seek the file will use the old
file->data after free. Eventually, the file will be close()d again and
file->data will be freed again.
Mark a net_fs file that doesn't reopen as broken. Do not permit read() or
close() on a broken file (seek is not exposed directly to the file API -
it is only called as part of read, so this blocks seeks as well).
As an additional defence, null out the ->data pointer if tftp_open() fails.
That would have lead to a simple null pointer dereference rather than
a mess of UAFs.
This may affect other protocols, I haven't checked.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We must not allow other verifiers to pass things like the GRUB modules.
Instead of maintaining a blocklist, maintain an allowlist of things
that we do not care about.
This allowlist really should be made reusable, and shared by the
lockdown verifier, but this is the minimal patch addressing
security concerns where the TPM verifier was able to mark modules
as verified (or the OpenPGP verifier for that matter), when it
should not do so on shim-powered secure boot systems.
Fixes: CVE-2022-28735
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Loaders rely on global variables for saving context which is consumed
in the boot hook and freed in the unload hook. In the case where a loader
command is executed twice, calling grub_loader_set() a second time executes
the unload hook, but in some cases this runs when the loader's global
context has already been updated, resulting in the updated context being
freed and potential use-after-free bugs when the boot hook is subsequently
called.
This adds a new API, grub_loader_set_ex(), which allows a loader to specify
context that is passed to its boot and unload hooks. This is an alternative
to requiring that loaders call grub_loader_unset() before mutating their
global context.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
