Generating the canary at build time allows the canary to be different for
every build which could limit the effectiveness of certain exploits.
Fallback to the statically generated random bytes if /dev/urandom is not
readable, e.g. Windows.
On 32-bit architectures, which use a 32-bit canary, reduce the canary to
4 bytes with one byte being NUL to filter out string buffer overflow attacks.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
NetBSD uses slightly different function names for the same functions.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Without this build-time mkfont fails dynamic linking. This is not ideal
but improves the situation until a better solution is available.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
*BSD puts fonts in other places. Add them to the list.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The HAVE_LIBZFS is defined by libzfs test and hence conflicts with
manual definition. On NetBSD it ends up detecting zfs but not detecting
nvpair and creates confusion. Split them.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Font might be located in different location, the default font might
not be available on all systems or other font might be preferred.
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Font might be located in different location, the default font might
not be available on all systems or other font might be preferred.
Signed-off-by: Mads Kiilerich <mads@kiilerich.com>
Signed-off-by: Richard Marko <srk@48.io>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the configure phase, the "-mcmodel=large" CFLAGS passed the test, but
because it has not been implemented in gcc, the following warning will
appear when compiling:
gcc: warning: 'large' is not supported, now cmodel is set to 'normal'
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The backtrace module is written assuming that the frame pointer is in %ebp.
By default, -Os optimization level is used, which enables the gcc option
-fomit-frame-pointer. This breaks the backtrace functionality. Enabling
this may cause an unnoticeable performance cost and virtually no size increase.
The backtrace command on x86_64 and probably i386 is broken due to the
above rationale. I've not verified, but presumably the backtrace that used
to be printed for an unhandled CPU exception is also broken. Do any distros
handle this?
Considering that, to my knowledge, no one has complained about this in the
over 13 years that -Os has been used, has this code actually been useful?
Is it worth disabling -fomit-frame-pointer? Though, I don't see much downside
right now in disabling it. Alternatively, we could disable/remove the
backtrace code. I think it would be nice to keep it and have it working.
Nowadays, presumably QEMU makes the GDB stub rarely used as I imagine most
are developing in a virtual machines. Also, the GDB stub does not work in UEFI.
So, if anyone is using it on real hardware, they are doing so on pretty old
machines. The lack of a GDB stub does not seem to be a pain point because
no one has got it working on UEFI.
This patch gets the backtrace command working on x86_64-efi in QEMU for me.
However, it hangs when run on my laptop. Not sure what's going on there.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
During configuration of SDL2, variable enable_grub_emu_sdl2 is checked
whether to throw an error message. However, error could not happen
because two unequal strings were compared. Fix this by referencing
value of enable_grub_emu_sdl2, not name.
Fixes: 17d6ac1a7 (emu: Add SDL2 support)
Signed-off-by: Michał Grzelak <mchl.grzlk@gmail.com>
Reviewed-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
During configuration of SDL, variable enable_grub_emu_sdl is checked
whether to throw an error message. However, error could not happen
because two unequal strings were compared. Fix this by referencing
value of enable_grub_emu_sdl, not name.
Fixes: 17d6ac1a7 (emu: Add SDL2 support)
Signed-off-by: Michał Grzelak <mchl.grzlk@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
So all we did with the surface in SDL1 was split into window,
surface, renderer and texture. Instead of drawing into the
surface and then flipping, you build your pixels, then update
a texture and then copy the texture to the renderer.
Here we use an empty RGB surface to hold our pixels, which enables
us to keep most of the code the same. The SDL1 code has been adjusted
to refer to "surface" instead of "window" when trying to access the
properties of the surface.
This approaches the configuration by adding a new --enable-grub-emu-sdl2
argument. If set to yes, or auto detected, it disables SDL1 support
automatically.
This duplicates the sdl module block in Makefile.core.def which may
be something to be aware of, but we also don't want to build separate
module.
Fixes: https://bugs.debian.org/1038035
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These should be quite obvious and will make the SDL2 patch easier
to read then doing it inline there.
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A working GRUB cannot be built with upcoming binutils and GCC, because linker
relaxation was added [1] causing new unsupported relocations to appear in modules.
So we pass -mno-relax to GCC if it is supported, to disable relaxation and make
GRUB forward-compatible with new toolchains.
While similar code already exists for sparc64 in configure.ac, sparc64 sets
LDFLAGS while LoongArch requires CFLAGS to be set. If we only set LDFLAGS on
LoongArch, GCC will still generate relaxation relocations in the .o files, so
the sparc64 code cannot be reused.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=56576f4a722b7398d35802ecf7d4185c27d6d69b
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds LoongArch to the GRUB build system and various tools,
so GRUB can be built on LoongArch as a UEFI application.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A new set of relocation types was added in the LoongArch ELF psABI v2.00
spec [1], [2] to replace the stack-based scheme in v1.00. Toolchain
support is available from binutils 2.40 and gcc 13 onwards.
This patch adds support for the new relocation types, that are simpler
to handle (in particular, stack operations are gone). Support for the
v1.00 relocs are kept for now, for compatibility with older toolchains.
[1] https://github.com/loongson/LoongArch-Documentation/pull/57
[2] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_appendix_revision_history
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When working on memory, it's nice to be able to test your work.
Add a memtest module. When compiled with --enable-mm-debug, it exposes
3 commands:
* lsmem - print all allocations and free space in all regions
* lsfreemem - print free space in all regions
* stress_big_allocs - stress test large allocations:
- how much memory can we allocate in one chunk?
- how many 1MB chunks can we allocate?
- check that gap-filling works with a 1MB aligned 900kB alloc + a
100kB alloc.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Building the current code with clang and the latest gnulib fails due to
the use of a variable-length-array (vla) warning, which turns in to an
error due to the presence of the -Werror during the build.
The gnulib team stated that their code should not be built with -Werror.
At present, the only way to do this is for the complete code-base, by
using the --disable-werror option to configure.
Rather than doing this, and failing to gain any benefit that it provides,
instead, if building with clang, this patch makes it possible to specifically
not error on vlas, while retaining the -Werror functionality otherwise.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The list of targets that support PCI is in gentpl.py. However, there is no
support for generating makefile script from a .def file that will apply
globally to the makefile, but on a per target basis. So instead, use
gentpl.py in configure to get the list of targets and check if the current
build target is one of them. If it is, set the automake conditional
COND_HAVE_PCI. Then in conf/Makefile.common add -DGRUB_HAS_PCI for the
platform if COND_HAVE_PCI is true.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Introduce ERROR_PLATFORM_NOT_SUPPORT_SSP environment variable to treat
the "--enable-stack-protector is only supported on EFI platforms" message
as a warning instead of an error. If ERROR_PLATFORM_NOT_SUPPORT_SSP is
set to "no" (case-insensitive), then the message will be printed as
a warning. Otherwise, it prints as an error. The default behavior is to
print the message as an error.
For any wrapper build script that has some variation of:
for p in SELECTED_GRUB_PLATFORMS; do \
configure --enable-stack-protector \
--with-platform${P} ... || die; \
done
make
The GRUB will fail to build if SELECTED_GRUB_PLATFORMS contains a platform
that does not support SSP.
Such wrapper scripts need to work-around this issue by modifying the
above for-loop, so it conditionally passes --enable-stack-protector to
configure for the proper GRUB platform(s).
However, if the above example is modified to have to conditionally pass
in --enable-stack-protector, its behavior is effectively the same as the
proposed change. Additionally, The list of SSP supported platforms is
now in 2 places. One in the configure script and one in the build wrapper
script. If the second list is not properly maintained it could mistakenly
disable SSP for a platform that later gained support for it.
Signed-off-by: Nicholas Vinson <nvinson234@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Autoconf will set a default CFLAGS of "-g -O2" if CFLAGS is not set.
CFLAGS was defaulted to "" early in configure to prevent this. A recent
commit ad9ccf660 (configure: Fix various new autotools warnings) added
AC_USE_SYSTEM_EXTENSIONS, which pulls in the autoconf CFLAGS check,
before we default CFLAGS and thus setting the autoconf default for
CFLAGS. Move the default setting of CFLAGS to before AC_USE_SYSTEM_EXTENSIONS
so that autoconf will see CFLAGS as set and not give it a default.
CFLAGS is also moved above AC_CONFIG_AUX_DIR, because CFLAGS should be
defaulted to "" as soon as possible to catch any autoconf macros that try
to use some other default. Regardless, this currently has no effect as that
macro does not consider the CFLAGS variable.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These CFLAGS definitions are reset below them before they have a change to
affect anything. The exception is the *-emu case, which is put in the next
if block, which is the only place its used before getting reset.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It appears as though the intent of this code is to define abort() and main()
symbols for some configure tests. However, it never gets used because the if
is only entered when not building for *-emu, but the next if block only runs
when building for *-emu. And the if block after that unconditionally resets
CFLAGS. So this code can have no effect.
Additionally, s/aclocal.m4/acinclude.m4/ and move grub_ASM_USCORE to put
with other marcos defined in acinclude.m4.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the INSTALL, "The HOST_* variables override not prefixed
variables". This change makes it so, instead of previous behavior, which
was to ignore the HOST_CC environment variable.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In addition to the changes carried in our gnulib patches, several
Coverity and code hygiene fixes that were previously downstream are also
included in this 3-year gnulib increment.
Unfortunately, fix-width.patch is retained.
Bump minimum autoconf version from 2.63 to 2.64 and automake from 1.11
to 1.14, as required by gnulib.
Sync bootstrap script itself with gnulib.
Update regexp module for new dynarray dependency.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These are probably stray references left after earlier removals.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
The libfuse 3.0.0 got released in 2016, with some API changes compared to 2.x.
This commit introduces support for 3.x while keeping it compatible with 2.6
as a fallback still.
To detect fuse3, switch configure over to use pkg-config, which is simpler yet
more reliable than looking for library and header manually. Also set
FUSE_USE_VERSION that way, as it depends on the used libfuse version.
Now that the CFLAGS are read from pkg-config, use just <fuse.h>, which works
with 2.x as well as 3.x and is recommended by libfuse upstream.
One behavior change of libfuse3 is that FUSE_ATOMIC_O_TRUNC is set by default,
which means that open with O_TRUNC is passed as-is instead of calling the
truncate operation. With libfuse2, truncate failed with -ENOSYS and that was
returned to the application. To make O_TRUNC fail with libfuse3, return -EROFS
explicitly if writing was requested.
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Define MM_DEBUG in config.h when --enable-mm-debug is passed to configure.
It was being defined in config-util.h which only gets used when building
GRUB utilities for the host side. The enabling of debugging for memory
management in include/grub/mm.h explicitly does not happen when compiling
for the GRUB utilities. So this debugging code effectively could never be
enabled. Note, that MM_DEBUG is defined in an #if directive because the
enabling of debugging checks if MM_DEBUG is defined, not what its value is.
So even if MM_DEBUG were defined to nothing, the debugging code would
still be enabled.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In GNU ld and ld.lld, -d is used with -r to allocate space to COMMON symbols.
This behavior is presumably to work around legacy projects which inspect
relocatable output by themselves and do not handle COMMON symbols. The GRUB
does not do this.
See https://github.com/llvm/llvm-project/issues/53660
-d is quite useless and ld.lld 15.0.0 will make -d no-op.
COMMON symbols have special symbol resolution semantics which can cause surprise
(see https://maskray.me/blog/2022-02-06-all-about-common-symbols). GCC<10 and
Clang<11 defaulted to -fcommon. Just use -fno-common to avoid COMMON symbols.
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
As of version 2.38 binutils defaults to ISA specification version
2019-12-13. This version of the specification has has separated the
the csr read/write (csrr*/csrw*) instructions and the fence.i from
the I extension and put them into separate Zicsr and Zifencei
extensions.
This implies that we have to adjust the -march flag passed to the
compiler accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The following procedure to build xen/pvgrub is broken.
git clone https://git.savannah.gnu.org/git/grub.git
cd grub
./bootstrap
mkdir build-xen
cd build-xen
../configure --with-platform=xen
make
It fails with the message:
/usr/lib64/gcc/x86_64-suse-linux/10/../../../../x86_64-suse-linux/bin/ld:
section .note.gnu.property VMA [0000000000400158,0000000000400187]
overlaps section .bss VMA [000000000000f000,000000000041e1af]
The most significant factor is that new assembler (GNU as) generates the
.note.gnu.property section as default. This note section overlaps with
.bss because it doesn't reposition with -Wl,-Ttext,0 with which the base
address of .text section is set, rather the address of .note.gnu.property
is calculated for some reason from 0x400000 where the ELF executable
defaults to start.
Using -Ttext-segment doesn't help either, though it is said to set the
address of the first byte of the text segment according to "man ld".
What it actually does is to override the default 0x400000, aka the image
base address, to something else. The entire process can be observed in
the default linker script used by gcc [1]. Therefore we can't expect it
to achieve the same thing as -Ttext given that the first segment where
.text resides is offset by SIZEOF_HEADERS plus some sections may be
preceding it within the first segment. The end result is .text always
has to start with non-zero address with -Wl,-Ttext-segment,0 if using
default linker script.
It is also worth mentioning that binutils upstream apparently doesn't
seem to consider this as a bug [2] and proposed to use -Wl,-Ttext-segment,0
which is not fruitful as what has been tested by Gentoo [3].
As long as GRUB didn't use ISA information encoded in .note.gnu.property,
we can safely drop it via -Wa,-mx86-used-note=no assembler option to
fix the linker error above.
This is considered a better approach than using custom linker script to
drop the .note.gnu.property section because object file manipulation can
also be hampered one way or the other in that linker script may not be
helpful. See also this commit removing the section in the process of objcopy.
6643507ce build: Fix GRUB i386-pc build with Ubuntu gcc
[1] In /usr/lib64/ldscripts/elf_x86_64.x or use 'gcc -Wl,--verbose ...'
PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x400000));
. = SEGMENT_START("text-segment", 0x400000) + SIZEOF_HEADERS;
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=27377
[3] https://bugs.gentoo.org/787221
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The Clang does not support -falign-jumps and only recently gained support
for -falign-loops. The -falign-jumps=1 should be tested beside
-fliang-loops=1 to avoid passing unrecognized options to the Clang:
clang-14: error: optimization flag '-falign-jumps=1' is not supported [-Werror,-Wignored-optimization-argument]
The -falign-functions=1 is supported by GCC 5.1.0/Clang 3.8.0. So, just
add the option unconditionally.
Signed-off-by: Fangrui Song <maskray@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GCC warns "cc1: warning: ‘-malign-loops’ is obsolete, use ‘-falign-loops’".
The Clang silently ignores -malign-{jumps,loops,functions}.
The preferred -falign-* forms have been supported since GCC 3.2. So, just
remove -malign-{jumps,loops,functions}.
Signed-off-by: Fangrui Song <maskray@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
... to factor out fix for glibc 2.25 introduced in 7a5b301e3 (build: Use
AC_HEADER_MAJOR to find device macros).
Note: Once glibc 2.25 is old enough and this fix is not needed also
AC_HEADER_MAJOR in configure.ac should be removed.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Skip versions between 2.07 and 2.10 to avoid leading zeros in minor
version number. This way version parsing in scripts should be easier.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Refactor clean_grub_dir() to create a backup of all the files, instead
of just irrevocably removing them as the first action. If available,
register atexit() handler to restore the backup if errors occur before
point of no return, or remove the backup if everything was successful.
If atexit() is not available, the backup remains on disk for manual
recovery.
Some platforms defined a point of no return, i.e. after modules & core
images were updated. Failures from any commands after that stage are
ignored, and backup is cleaned up. For example, on EFI platforms update
is not reverted when efibootmgr fails.
Extra care is taken to ensure atexit() handler is only invoked by the
parent process and not any children forks. Some older GRUB codebases
can invoke parent atexit() hooks from forks, which can mess up the
backup.
This allows safer upgrades of MBR & modules, such that
modules/images/fonts/translations are consistent with MBR in case of
errors. For example accidental grub-install /dev/non-existent-disk
currently clobbers and upgrades modules in /boot/grub, despite not
actually updating any MBR.
This patch only handles backup and restore of files copied to /boot/grub.
This patch does not perform backup (or restoration) of MBR itself or
blocklists. Thus when installing i386-pc platform, corruption may still
occur with MBR and blocklists which will not be attempted to be
automatically recovered.
Also add modinfo.sh and *.efi to the cleanup/backup/restore code path,
to ensure it is also cleaned, backed up and restored.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It works only on UEFI platforms but can be quite easily extended to
others architectures and platforms if needed.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
..to reflect the GRUB build reality in them.
Additionally, fix text formatting a bit.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Commit d5a32255d (misc: Make grub_strtol() "end" pointers have safer
const qualifiers) introduced "restrict" keyword into some functions
definitions. This keyword was introduced in C99 standard. However, some
compilers by default may use C89 or something different. This behavior
leads to the breakage during builds when c89 or gnu89 is in force. So,
let's set gnu99 C language standard for all compilers by default. This
way a bit random build issue will be fixed and the GRUB source will be
build consistently regardless of type and version of the compiler.
It was decided to use gnu99 C language standard because it fixes the
issue mentioned above and also provides some useful extensions which are
used here and there in the GRUB source. Potentially we can use gnu11
too. However, this may reduce pool of older compilers which can be used
to build the GRUB. So, let's live with gnu99 until we discover that we
strongly require a feature from newer C standard.
The user is still able to override C language standard using relevant
*_CFLAGS variables.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The memory management system supports a debug mode that can be enabled
at build time by passing "--enable-mm-debug" to the configure script.
Passing the option will cause us define MM_DEBUG as expected, but in
fact the reverse option "--disable-mm-debug" will do the exact same
thing and also set up the define. This currently causes the build of
"lib/gnulib/base64.c" to fail as it tries to use `grub_debug_malloc()`
and `grub_debug_free()` even though both symbols aren't defined.
Seemingly, `AC_ARG_ENABLE()` will always execute the third argument if
either the positive or negative option was passed. Let's thus fix the
issue by moving the call to`AC_DEFINE()` into an explicit `if test
$xenable_mm_debug` block, similar to how other defines work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
While GRUB has no platform support for SuperH (sh4) yet, this change
adds the target-specific handling of soft-floats such that the GRUB
utilities can be built on this target.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
PIE should be disabled in assembly sources as well, or else GRUB will
fail to boot.
Bug: https://bugs.gentoo.org/667852
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
