The @xref command is meant to be used at the beginning of a sentence
because its expansion creates a "See " prefix on all output formats, and
on older makeinfo versions is strict about enforcing a "." or "," after
the command. The @ref command has no such restriction and is just the
link, which allows more control over output. This also fixes an issue
where there was a repeated "see" in the output.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Allow using the envvar GRUB_SHELL_LUKS_TIMEOUT to change the default
timeout. If not specified, use value of GRUB_SHELL_DEFAULT_TIMEOUT. And
if that is not specified, fallback to original 600s timeout.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This was causing the cryptomount command to return failure even though
the crypto device was successfully added. Of course, this meant that any
script using the return code would behave unexpectedly.
Fixes: 3cf2e848bc03 (disk/cryptodisk: Allows UUIDs to be compared in a dash-insensitive manner)
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrich Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To comply with C99 and POSIX standards, snprintf() should return the
number of bytes that would be written to the string (excluding the
terminating NUL byte) if the buffer size was big enough. Before this
change, the return value was the minimum of the standard return and the
length of the buffer. Rarely is the return value of grub_snprintf() or
grub_vsnprintf() used with current code, and the few places where it is
used do not need to be changed.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This test is meant to test output via various serial devices. Currently,
only the PCI serial device is tested.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While here, move "-qemu=*" case to be next to the "--qemu-opts=*" case.
This causes no change in logic, but is more logically located.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In long list mode, if the file can not be opened, the file is not printed.
Instead, print the file but print the size as "????????????".
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For each non-directory path argument to the ls command, the full path was
being sent to the print functions, instead of the dirname. The long output
print function expected dirname to be the directory containing the file
and so could not open the file to get the file size because the generated
path was incorrect. This caused the output to be a blank line.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Specifically, return GRUB_ERR_BAD_FILE_TYPE because this is what is
expected by the ls command when it is given a path to a non-directory.
This fixes a bug where calling ls with a list of non-directory paths
outputs a blank line for each such argument.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The videoinfo command will initialize all non-active video adapters. Video
drivers tend to zero out the global framebuffer object on initialization.
This is not a problem when there is no active video adapter. However, when
there is, then outputting to the video adapter will cause a crash because
methods in the framebuffer object are reinitialized. For example, this
command sequence will cause a crash.
terminal_output --append gfxterm; videoinfo
When running in a QEMU headless with GRUB built for the x86_64-efi target,
the first command initializes the Bochs video adapter, which, among
other things, sets the set_page() member function. Then when videoinfo is
run, all non-Bochs video adapters will be initialized, each one wiping
the framebuffer and thus setting set_page to NULL. Soon after the videoinfo
command finishes there will be a call to grub_refresh(), which will
ultimately call the framebuffer's set_page which will be NULL and cause
a crash when called.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A list of improvements:
* Remove reference to "initial ramdisk" and replace with "initrd". This
then covers the case of ramdisk and ramfs, which is the usual method
with kernels 2.6 and newer.
* Add sentence with URL to initrd documentation Linux kernel.
* Add a section documenting how to have the initrd command generate
a new-style initrd via a specially crafted argument and include an example.
* Update initrd16 to refer to the initrd section and make note that
initrd16 is only on the pc platform.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to commit 0231d00082 (ACPI: SPCR: Make SPCR available to x86)
to the Linux kernel, "On x86, many systems have a valid SPCR table but the
table version is not 2 so the table version check must be a warning."
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The cat command should not be used to print binary data because it can
show bytes not in the binary data and not show bytes that are in the data,
which can lead to confusion. This happens because cat does some processing
of the data stream, namely trying to decode substrings as UTF-8.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
During configuration of SDL2, variable enable_grub_emu_sdl2 is checked
whether to throw an error message. However, error could not happen
because two unequal strings were compared. Fix this by referencing
value of enable_grub_emu_sdl2, not name.
Fixes: 17d6ac1a7 (emu: Add SDL2 support)
Signed-off-by: Michał Grzelak <mchl.grzlk@gmail.com>
Reviewed-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Also reword a prior sentence to be more clear.
Fixes: 5a3d2b4742df (docs: Add debugging chapter to development documentation)
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On an unmerged-usr system, grub-mkconfig errors out with the following
error due to /usr/bin/sh not existing:
/usr/sbin/grub-mkconfig: /etc/grub.d/25_bli: /usr/bin/sh: bad interpreter: No such file or directory
Use a /bin/sh shebang to fix the error as well as match the other
existing files.
Fixes: 158a6583e (util/grub.d/25_bli.in: Activate bli module on EFI)
Signed-off-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Oliver Steffen <osteffen@redhat.com>
This allows an invocation of grub-shell to set the value of debug regardless
of the global default environment variable GRUB_SHELL_DEFAULT_DEBUG.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Since this is fairly verbose output, do not enable first level of debug
is turned on.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The LoadImage() provided by the shim does not consult MOK when loading
an image. So, simply signature verification fails when it should not.
This means we cannot use Linux EFI stub to start the kernel when the
shim is loaded. We have to fallback to legacy mode on x86 architectures.
This is not possible on other architectures due to lack of legacy mode.
This is workaround which should disappear when the shim provides
LoadImage() which looks up MOK during signature verification.
On the occasion align constants in include/grub/efi/sb.h.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
... because (surprisingly) it does not use specific EFI calling convention...
Fixes: 6a080b9cd (efi: Add calling convention annotation to all prototypes)
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
acpi actually needs to access PCI, while pci-arbiter will not be making
use of ACPI, so we need to start acpi first.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
During configuration of SDL, variable enable_grub_emu_sdl is checked
whether to throw an error message. However, error could not happen
because two unequal strings were compared. Fix this by referencing
value of enable_grub_emu_sdl, not name.
Fixes: 17d6ac1a7 (emu: Add SDL2 support)
Signed-off-by: Michał Grzelak <mchl.grzlk@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When referring to initrd16 the link for initrd16 should be used, not a link
for initrd. Also, correct the spelling of additionally and add a comma after
it to correct its grammatical usage.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using grub_strncpy() instead of grub_snprintf() is less overhead and
indicates clearly that the dest should be the same string as the source.
Also fix indentation.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These are currently always the same as PRI*GRUB_UINT64_T, but they may
not be in the future.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Also add parenthesis to nested ternary operator to improve clarity.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Python bytecode files, which end in .pyc, may be generated by the build
system as needed and should not go into the git repository.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When creating at runtime a newc initrd via arguments to initrd with "newc:"
prefixes, only emit a directory path record once. The original code
intended to do that by bailing out of emitting the record when the record
to be created matches an existing record. However, this does not happen
because grub_memcmp() is improperly checked.
Generating duplicate newc directory records does not cause any problems
because the Linux unpacker will skip it once it sees the directory already
exists. This fix saves a little processing and makes the generated newc
cpio archive a little smaller.
Fixes: 92750e4c60 (Add ability to generate newc additions on runtime.)
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
EFI status codes are of different classes depending on the first byte and
all error status codes defined in appendix D of the main spec start from
1 and have the high bit set. When printing as a uint, the decimal is a very
large number that needs have the high bit cleared get the spec error code.
This can be easily visually done by a human if the number is printed as hex.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Small set of wording and grammatical edits which did not make it in time
for the original review of the chapter.
Signed-off-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Most of leftover code blindly assumes GRUB_RELOCATOR_FIRMWARE_REQUESTS_QUANT
divisibility by 8. So, enforce this at compile time.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
So all we did with the surface in SDL1 was split into window,
surface, renderer and texture. Instead of drawing into the
surface and then flipping, you build your pixels, then update
a texture and then copy the texture to the renderer.
Here we use an empty RGB surface to hold our pixels, which enables
us to keep most of the code the same. The SDL1 code has been adjusted
to refer to "surface" instead of "window" when trying to access the
properties of the surface.
This approaches the configuration by adding a new --enable-grub-emu-sdl2
argument. If set to yes, or auto detected, it disables SDL1 support
automatically.
This duplicates the sdl module block in Makefile.core.def which may
be something to be aware of, but we also don't want to build separate
module.
Fixes: https://bugs.debian.org/1038035
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These should be quite obvious and will make the SDL2 patch easier
to read then doing it inline there.
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently booting the system is prevented when call to EFI firmware
hash_log_extend_event() returns unknown error. Solve this by following
convention used in commit a4356538d (commands/tpm: Don't propagate
measurement failures to the verifiers layer).
Let the system to be bootable by default when unknown TPM error is
encountered. Check environment variable tpm_fail_fatal to fallback to
previous behaviour.
Signed-off-by: Michał Grzelak <mchl.grzlk@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently bootstrap complains in the following way when
patching gnulib files:
patching file argp-help.c
Hunk #1 succeeded at 52 (offset 1 line).
Hunk #2 succeeded at 1548 (offset 115 lines).
patching file mbswidth.c
patching file mbswidth.h
Hunk #1 succeeded at 40 (offset -5 lines).
Let's fix it by amending line numbers in the patch.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Alec Brown <alec.r.brown@oracle.com>
The commit bb4aa6e06 (efi: Drop all uses of efi_call_XX() wrappers) did
not add some __grub_efi_api attributes to the EFI calls. Lack of them
led to hangs on x86_64-efi target. So, let's add missing __grub_efi_api
attributes.
Fixes: bb4aa6e06 (efi: Drop all uses of efi_call_XX() wrappers)
Reported-by: Christian Hesse <list@eworm.de>
Reported-by: Robin Candau <antiz@archlinux.org>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Robin Candau <antiz@archlinux.org>
Tested-by: Christian Hesse <list@eworm.de>
Reviewed-by: Peter Jones <pjones@redhat.com>
Move the constant from grub-core/osdep/linux/getroot.c to
include/grub/disk.h and then reuse it in place of the
hardcoded 1024 limit in diskfilter.
Fixes: 2a5e3c1f2 (disk/diskfilter: Don't make a RAID array with more than 1024 disks)
Cc: Daniel Axtens <dja@axtens.net>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
