Otherwise it breaks the decompressors for MIPS targets.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Without it compiler generates GPREL16 references which do not work
with our memory layout.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
BCJ is not available for all platforms hence arguments may end up unused.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Otherwise depending on compiler we end up with umoddi3 reference and
failed module dependency resolution.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Users have no reason to see this and it can break graphical boot.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add documentation for all GRUB modules contained in the source code tree.
When possible, cross-references to additional detail on commands was added
from their corresponding module documentation. In addition, documentation
for the file command was added.
Signed-off-by: Andrew Hamilton <adhamilt@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The get_part_uuid() function made an assumption that the target GRUB
device is a partition device and accessed device->disk->partition
without checking for NULL. There are four situations where this
assumption is problematic:
1. The device is a net device instead of a disk.
2. The device is an abstraction device, like LVM, RAID, or CRYPTO, which
is mostly logical "disk" ((lvmid/<UUID>) and so on).
3. Firmware RAID may present the ESP to GRUB as an EFI disk (hd0) device
if it is contained within a Linux software RAID.
4. When booting from a CD-ROM, the ESP is a VFAT image indexed by the El
Torito boot catalog. The boot device is set to (cd0), corresponding
to the CD-ROM image mounted as an ISO 9660 filesystem.
As a result, get_part_uuid() could lead to a NULL pointer dereference
and trigger a synchronous exception during boot if the ESP falls into
one of these categories. This patch fixes the problem by adding the
necessary checks to handle cases where the ESP is not a partition device.
Additionally, to avoid disrupting the boot process, this patch relaxes
the severity of the errors in this context to non-critical. Errors will
be logged, but they will not prevent the boot process from continuing.
Fixes: e0fa7dc84 (bli: Add a module for the Boot Loader Interface)
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-By: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
As reported by Victoriia Egorova in bug 65880, grub-mkrescue does not
verify that the expected argument of an option like -d or -k does really
exist in argv. So, check the loop counter before incrementing it inside
the loop which copies argv to argp_argv. Issue an error message similar
to what older versions of grub-mkrescue did with a missing argument,
e.g. 2.02.
Fixes: https://savannah.gnu.org/bugs/index.php?65880
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The fdtdump command allows dumping arbitrary device tree properties
and saving them to a variable similar to the smbios command.
This is useful in scripts where further actions such as selecting
a kernel or loading another device tree depend on the compatible
or model values of the device tree provided by the firmware.
For now only the root level properties of the dtb are exposed.
Signed-off-by: Tobias Heider <tobias.heider@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
First they're use macros so they can't be translated as-is.
Second there is no point in translating them as they're too technical.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Current code works only if package matches binary name transformation rules.
It's often true but is not guaranteed.
Fixes: https://savannah.gnu.org/bugs/?64410
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Silently keeping entries in the list if the address matches, but the
page count doesn't is a bad idea, and can lead to double frees.
grub_efi_free_pages() have already freed parts of this block by this
point, and thus keeping the whole block in the list and freeing it again
at exit can lead to double frees.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If the firmware happens to return 0 as an address of allocated pages,
grub_efi_allocate_pages_real() tries to allocate a new set of pages,
and then free the ones at address 0.
However at that point grub_efi_store_alloc() wasn't yet called, so
freeing the pages at 0 using grub_efi_free_pages() which calls
grub_efi_drop_alloc() isn't necessary, so let's call b->free_pages()
instead.
The call to grub_efi_drop_alloc() doesn't seem particularly harmful,
because it seems to do nothing if the allocation it is asked to drop
isn't on the list, but the call to it is obviously unnecessary here.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If the map was too big for the initial allocation, it was freed and replaced
with a bigger one, but the free call still used the hard-coded size.
Seems like this wasn't hit for a long time, because most firmware maps
fit into 12K.
This bug was triggered on Project Mu firmware with a big memory map, and
results in the heap getting trashed and the firmware ASSERTING on
corrupted heap guard values when GRUB exits.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
mkfs.erofs with version < 1.6 does not support the -L option.
Let's detect the version of mkfs.erofs and skip the label tests
if it is not supported.
Suggested-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The current Debian stable, now 12, has dropped the exfat-utils package
that the exfat filesystem test requires to run. There is an exfatprogs
package that replaces exfat-utils, though it is not a drop-in replacement
because mkfs.exfat has differing command line option names. Note, that
we're not yet switching to using the exfat kernel module because this
allows the testings on kernels that do not have the module.
Update mkfs.exfat usage to adhere to the different exfatprogs usage. Also,
the exfatprogs mkfs.exfat, following the exfat specification more closely,
only allows a maximum of 22 bytes of UTF-16 characters in the volume label
compared to 30 bytes from exfat-utils. So the exfat label test is updated
accordingly.
Update documentation to note that exfatprogs is now needed and also
exfat-fuse, which is needed do the fuse mount.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When $detached_header was set 1, $luksdiskfile was set to the LUKS header
file path with "${detached_header:-$luksfile}" appended, which evaluates
to "1". Fix this by using two statements to set $luksdiskfile. The first
sets it to the header file if $detached_header is set, otherwise leave it
unset. The second statement sets it to itself if it is already set,
otherwise it is set to $luksfile.
Fixes: a7b540e6e (tests: Add cryptomount functional test)
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
First look for firmware files in the source directory and then, if not
found, look for them in locations where Debian installs them. Prefer to
use the unified firmware file and, if not found, use the pflash firmware
files split in to code and variables. By looking for files in the source
directory first, system firmware files can be overridden and it can be
ensured that the tests can be run regardless of the distro or where the
system firmware files are stored. If no firmware files are found, print
an error message and exit with error.
If a firmware VARS file is found, use it with snapshot mode enabled, which
makes the VARS writable to the virtual machine, but does not write back
the changes to the file. This allows using the readonly system VARS file
without copying it or using it in readonly mode, which causes the ARM
machine to fail. This also gives tests effectively their own ephemeral VARS
file that can be written to without causing side-effects for other tests.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the OVMF whitepaper [1]:
IMPORTANT: Never pass OVMF.fd to qemu with the -bios option. That option
maps the firmware image as ROM into the guest's address space, and forces
OVMF to emulate non-volatile variables with a fallback driver that is
bound to have insufficient and confusing semantics.
Use the pflash interface instead. Currently the unified firmware file is
used, which contains both firmware code and variable sections. By enabling
snapshot on the pflash device, the firmware can be loaded in such a way
that variables can be written to without writing to the backing file.
Since pflash does no searching for firmware paths that are not absolute,
unlike the -bios option, also make firmware paths absolute. Additionally,
update the previous firmware paths or file names that did not correspond to
ones installed by Debian.
Use the q35 machine, instead of the default i440fx, for i386-efi because
the default machine type does not emulate a flash device, which is now
needed to load the firmware.
[1] http://www.linux-kvm.org/downloads/lersek/ovmf-whitepaper-c770f8c.txt
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allow using GDB to debug a failing QEMU test. This output does not cause
issues for tests because it happens before the trim line, and so will be
ignored.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Type 0x01 was introduced with the ACPI DBGP table and type 0x12 was introduced
with the ACPI DBG2 table. Type 0x12 is used by the ACPI SPCR table on recent
AWS bare-metal instances (c6i/c7i). Also give each debug type a proper name.
Signed-off-by: Udo Steinberg <udo@hypervisor.org>
Reviewed-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Current code in some codepaths neither discards nor reports errors.
Properly surface the error.
While on it split 2 cases of unrelated variables both named err.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When GRUB image is netbooted on ppc64le, the keyboard input exhibits
significant latency, reports even say that characters are processed
about once per second. This issue makes interactively trying to debug
a ppc64le config very difficult.
It seems that the latency is largely caused by a 200 ms timeout in the
idle event loop, during which the network card interface is consistently
polled for incoming packets. Often, no packets arrive during this
period, so the timeout nearly always expires, which blocks the response
to key inputs.
Furthermore, this 200 ms timeout might not need to be enforced at this
basic layer, considering that GRUB performs synchronous reads and its
timeout management is actually handled by higher layers, not directly in
the card instance. Additionally, the idle polling, which reacts to
unsolicited packets like ICMP and SLAAC, would be fine at a less frequent
polling interval, rather than needing a timeout for receiving a response.
For these reasons, we believe the timeout in get_card_packet() should be
effectively removed. According to test results, the delay has disappeared,
and it is now much easier to use interactively.
Signed-Off-by: Michael Chang <mchang@suse.com>
Tested-by: Tony Jones <tonyj@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The measurements for confidential computing has been introduced in the
commit 4c76565b6 (efi/tpm: Add EFI_CC_MEASUREMENT_PROTOCOL support).
Recently the patch 30708dfe3 (tpm: Disable the tpm verifier if the TPM
device is not present) has been introduced to optimize the memory usage
when a TPM device is not available on platforms. This fix prevents the
tpm module to be loaded on confidential computing platforms, e.g. Intel
machines with TDX enabled, where the TPM device is not available.
In this patch, we propose to load the tpm module for this use case by
generalizing the tpm feature detection in order to cover CC platforms.
Basically, we do it by detecting the availability of the
EFI_CC_MEASUREMENT_PROTOCOL EFI protocol.
Fixes: https://savannah.gnu.org/bugs/?65821
Fixes: 30708dfe3 (tpm: Disable the tpm verifier if the TPM device is not present)
Signed-off-by: Hector Cao <hector.cao@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Allocate memory if needed, while saving the corresponding release
operation, reducing the amount of code and code complexity.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds support for Radix, Xive and Radix_gtse in Options
vector5 which is required for KVM LPARs. KVM LPARs ONLY support
Radix and not the Hash. Not enabling Radix on any PowerVM KVM LPARs
will result in boot failure.
Signed-off-by: Avnish Chouhan <avnish@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We don't need any actual adjustments as we don't use the affected structures.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Without them, e.g., 0x80LL on 64-bit target is 32-bit byte-swapped to
0xffffffff80000000 instead of correct 0x80000000.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
ARRAY_SIZE() is the count of elements, but the element size is 4 bytes, so
this was only initing the first 1/4th of the table. Detected with valgrind.
This should only matter in error paths, and I've not been able to identify
any actual misbehaviour that results from reading in-bounds but uninited data.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This isn't intended to be a functional change, but it makes a lot of failures a lot
faster, which is extremely helpful for fuzzing.
Without this change, we keep trying and trying to read more bytes into our buffer,
never being able to (read always returns 0) and so we just return old buffer contents
over and over until the decompression process fails some other way.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add functionality to disable command line interface access and editing of GRUB
menu entries if GRUB image is built with --disable-cli.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EROFS [1] is a lightweight read-only filesystem designed for performance
which has already been shipped in most Linux distributions as well as widely
used in several scenarios, such as Android system partitions, container
images and rootfs for embedded devices.
This patch brings in the EROFS uncompressed support. Now, it's possible to
boot directly through GRUB with an EROFS rootfs.
Support for the EROFS compressed files will be added later.
[1] https://erofs.docs.kernel.org
Signed-off-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The following EROFS patch will use this helper to handle
ALIGN_UP() overflow.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is required if the pathname contains spaces or GRUB shell
metacharacters else the generated config file check will fail.
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When handling a regular LVM volume, GRUB can fail with the message:
error: disk `lvmid/******-****-****-****-****-****-****/******-****-****-****-****-****-******' not found.
If the condition which triggers this exists, grub-probe will report the
error mentioned above. Similarly, the GRUB boot code will fail to detect
LVM volumes, resulting in a failure to boot off of LVM disks/partitions.
The condition can be created on any LVM VG by an LVM configuration change,
so any system with /boot on LVM can become unbootable at "any" time (after
any LVM configuration change).
The problem is caused by an incorrect computation of mda_end in disk/lvm.c,
when the metadata area wraps around. Apparently, this can start happening at
around 220 metadata changes to the VG.
Fixes: 879c4a834 (lvm: Fix two more potential data-dependent alloc overflows)
Fixes: https://savannah.gnu.org/bugs/?61620
Signed-off-by: Rogier <rogier777@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-By: Michael Chang <mchang@suse.com>
Give the user a chance to re-enter their cryptodisk passphrase after a typo,
rather than immediately failing (and likely dumping them into a GRUB shell).
By default, we allow 3 tries before giving up. A value in the
cryptodisk_passphrase_tries environment variable will override this default.
The user can give up early by entering an empty passphrase, just as they
could before this patch.
Signed-off-by: Forest <forestix@nom.one>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The test corpus for version-1 RAID generated an infinite recursion
in grub_partition_iterate() while attempting to read the superblock.
The reason for the issue was that the data region overlapped with
the superblock.
The infinite call loop looks like this:
grub_partition_iterate() -> partmap->iterate() ->
-> grub_disk_read() -> grub_disk_read_small() ->
-> grub_disk_read_small_real() -> grub_diskfilter_read() ->
-> read_lv() -> read_segment() -> grub_diskfilter_read_node() ->
-> grub_disk_read() -> grub_disk_read_small() -> ...
The fix adds checks for both the superblock region and the data
region when parsing the superblock metadata in grub_mdraid_detect().
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The "ground truth" stack protector cookie value is kept in a global
variable, and loaded in every function prologue and epilogue to store
it into resp. compare it with the stack slot holding the cookie.
If the comparison fails, the program aborts, and this might occur
spuriously when the global variable changes values between the entry and
exit of a function. This implies that assigning the global variable at
boot should not involve any instrumented function calls, unless special
care is taken to ensure that the live call stack is synchronized, which
is non-trivial.
So avoid any function calls, including grub_memcpy(), which is
unnecessary given that the stack cookie is always a suitably aligned
variable of the native word size.
While at it, leave the last byte 0x0 to avoid inadvertent unbounded
strings on the stack.
Note that the use of __attribute__((optimize)) is described as
unsuitable for production use in the GCC documentation, so let's drop
this as well now that it is no longer needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new keyword, "depends", to the module definition syntax
used in Makefile.core.def. This allows specifying explicit module
dependencies together with the module definition.
Do not track the "extra_deps.lst" file in the repository anymore,
it is now auto-generated.
Make use of this new keyword in the bli module definition.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Otherwise the GRUB cannot start due to missing symbols when stack
protector is enabled on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
_split_longopt() was the bash-completion private API and removed since
bash-completion 2.12. This commit initializes the bash-completion
general variables with _init_completion() to avoid the potential
"command not found" error.
Although bash-completion 2.12 introduces _comp_initialize() to deprecate
_init_completion(), _init_completion() is still chosen for the better
backward compatibility.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
