Only perform call to fwsetup if one is on EFI platform. On all other
platforms fwsetup command does not exists, and thus returns 0 and
a useless uefi-firmware menu entry gets generated.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This enables an early failure; for i386-ieee1275 and powerpc-ieee1275 on
Linux, without /dev/nvram the system may be left in an unbootable state.
Signed-off-by: Ismael Luceno <iluceno@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A user may wish to use an image that is not sorted as the "latest"
version as the top-level entry. For example, in Arch Linux, if a user
has the LTS and regular kernels installed, "/boot/vmlinuz-linux-lts"
gets sorted as the "latest" compared to "/boot/vmlinuz-linux", meaning
the LTS kernel becomes the top-level entry. However, a user may wish to
use the regular kernel as the top-level default with the LTS only
existing as a backup.
This need can be seen in Arch Linux's AUR with two user-submitted
packages[0][1] providing an update hook which patches /etc/grub.d/10_linux
to move the desired kernel to the top-level. This patch serves to solve
this in a more generic way.
Introduce the GRUB_TOP_LEVEL, GRUB_TOP_LEVEL_XEN and GRUB_TOP_LEVEL_OS_PROBER
variables to allow users to specify the top-level entry.
Create grub_move_to_front() as a helper function which moves entries to
the front of a list. This function does the heavy lifting of moving
the menu entry to the front in each script.
In 10_netbsd, since there isn't an explicit list variable, extract the
items that are being iterated through into a list so that we can
optionally apply grub_move_to_front() to the list before the loop.
[0]: https://aur.archlinux.org/packages/grub-linux-default-hook
[1]: https://aur.archlinux.org/packages/grub-linux-rt-default-hook
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Reviewed-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For printf()/fprintf() functions, unsigned integers should use %u as the
valid conversion specifier instead of %d.
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The point of no return is used to define a point where no change should
be reverted in a wake of fatal error that consequently aborts the
process. The powerpc-ieee1275 install apparently missed this point of no
return definition that newly installed modules could be inadvertently
reverted after successful image embedding so that boot failure is
incurred due to inconsistent state.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds acpi as bootstrap module whenever it is available. This opens the
path for proper IRQ routing for fully-userland disk drivers.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allow treating util/grub-module-verifierXX.c as a file you can build
directly so syntax checkers like vim's "syntastic" plugin, which uses
"gcc -x c -fsyntax-only" to build it, will work.
One still has to do whatever setup is required to make it pick the
right include dirs, which -I options we use, etc., but this makes
it so you can do the checking on the file you're editing, rather
than on a different file.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In addition to C locale there is also C.UTF-8 locale now. Filter that as
well, by using ${grub_lang}, which contains a stripped value.
This fixes the following message and resulting boot failure:
error: file `/boot/grub/locale/C.gmo' not found.
Signed-off-by: Christian Hesse <mail@eworm.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new --is-supported option to commands/efi/efifwsetup and
conditionalize display on it.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The 30_uefi-firmware template checks if an OsIndicationsSupported UEFI var
exists and EFI_OS_INDICATIONS_BOOT_TO_FW_UI bit is set, to decide whether
a "fwsetup" menu entry would be added or not to the GRUB menu.
But this has the problem that it will only work if the configuration file
was created on an UEFI machine that supports booting to a firmware UI.
This for example doesn't support creating GRUB config files when executing
on systems that support both UEFI and legacy BIOS booting. Since creating
the config file from legacy BIOS wouldn't allow to access the firmware UI.
To prevent this, make the template to unconditionally create the grub.cfg
snippet but check at runtime if was booted through UEFI to decide if this
entry should be added. That way it won't be added when booting with BIOS.
There's no need to check if EFI_OS_INDICATIONS_BOOT_TO_FW_UI bit is set,
since that's already done by the "fwsetup" command when is executed.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In util/grub-module-verifierXX.c, the function get_shnum() returns the variable
shnum, which is of the type Elf_Word. In the function, shnum can be obtained by
the e_shnum member of an Elf_Ehdr or the sh_size member of an Elf_Shdr. The
sh_size member can either be grub_uint32_t or grub_uint64_t, depending on the
architecture, but Elf_Word is only grub_uint32_t. To account for when sh_size is
grub_uint64_t, we can set shnum to have type Elf_Shnum and have get_shnum()
return an Elf_Shnum.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The linux_xen template orders the "early" initrd file(s) _first_
(i.e., before the "real" initrd files) and that seems reasonable,
as microcode updates usually come first.
However, this usually breaks Linux boot with initrd under Xen
because Xen assumes the real initrd is the first multiboot[2]
module after the kernel, passing its address over to Linux in
Xen's start_info struct.
So, if a microcode-only initrd (i.e., without init/userspace)
is found by grub-mkconfig, it ends up considered as a normal
initrd by the Linux kernel, which cannot do anything with it
(as it has no other files) and panic()s unable to mount root
if it depends on a initrd to do that (e.g., root=UUID=...).
...
Well, since Xen doesn't actually use the provided microcode
by default / unless the 'ucode=<module number|scan>' option
is enabled, this isn't used in the general case (and breaks).
Additionally, if an user enables the 'ucode=' option, that
either specifies which module is to be used for microcode,
or scans all modules (regardless of being first) for that.
Thus, for Xen:
- it is *not required* to have microcode first,
- but it is *required* to have real initrd first
So, fix it by ordering the real initrd before early initrd(s).
After:
# touch /boot/xen /boot/microcode.cpio
# grub-mkconfig 2>/dev/null | grep -P '^\t(multiboot|module)'
multiboot /boot/xen ...
module /boot/vmlinuz-5.4.0-122-generic ...
module --nounzip /boot/initrd.img-5.4.0-122-generic
module --nounzip /boot/microcode.cpio
...
Corner case specific to Xen implementation details:
It is actually _possible_ to have a microcode initrd first,
but that requires a non-default option (so can't rely on it),
and it turns out to be inconsistent with its counterpart
(really shouldn't rely on it, as it may get confusing; below).
'ucode=1' does manually specify the first module is microcode
_AND_ clears its bit in the module bitmap. The next module is
now the 'new first', and gets passed to Linux as initrd. Good.
'ucode=scan' checks all modules for microcode, but does _NOT_
clear a bit if it finds one (reasonable, as it can find that
prepended in a "real" initrd anyway, which needs to be used).
The first module still gets passed to Linux as initrd. Bad.
Fixes: e86f6aafb8de (grub-mkconfig/20_linux_xen: Support multiple early initrd images)
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The linux_xen template can put multiple initrd files in the
same multiboot[2] module[2] command, which is against specs.
This causes ONLY the _first_ initrd file to be loaded; other
files just have filenames in a "cmdline" string of the first
initrd file and are NOT loaded.
Fix this by inserting a module[2] command per initrd file.
Before:
# touch /boot/xen /boot/microcode.cpio
# grub-mkconfig 2>/dev/null | grep -P '^\t(multiboot|module)'
multiboot /boot/xen ...
module /boot/vmlinuz-5.4.0-122-generic ...
module --nounzip /boot/microcode.cpio /boot/initrd.img-5.4.0-122-generic
After:
# touch /boot/xen /boot/microcode.cpio
# grub-mkconfig 2>/dev/null | grep -P '^\t(multiboot|module)'
multiboot /boot/xen ...
module /boot/vmlinuz-5.4.0-122-generic ...
module --nounzip /boot/microcode.cpio
module --nounzip /boot/initrd.img-5.4.0-122-generic
Cause:
The code was copied from the linux template, which is *apparently*
equivalent.. but its initrd command grub_cmd_initrd() *supports*
multiple files (see grub_initrd_init()), while module/module2 in
grub_cmd_module() *does not* (see grub_multiboot[2]_add_module()).
See commit e86f6aafb8de (grub-mkconfig/20_linux_xen: Support multiple early initrd images):
'This is basically a copy of a698240d "grub-mkconfig/10_linux:
Support multiple early initrd images" ...'
Specs:
Both multiboot and multiboot2 specifications mention support for
'multiple boot modules' (struct/tag used for kernel/initrd files):
"Boot loaders don’t have to support multiple boot modules,
but they are strongly encouraged to" [1,2]
However, there is a 1:1 relationship between boot modules and files,
more or less clearly; note the usage of singular/plural "module(s)".
(Multiboot2, clearly: "One tag appears per module".)
Multiboot [1]:
"the ‘mods’ fields indicate ... what boot modules
were loaded ..., and where they can be found.
‘mods_count’ contains the number of modules loaded"
"The first two fields contain the start and end addresses
of the boot module itself."
Multiboot2 [2]:
"This tag indicates ... what boot module was loaded ...,
and where it can be found."
"The ‘mod_start’ and ‘mod_end’ contain the start and end
physical addresses of the boot module itself."
"One tag appears per module.
This tag type may appear multiple times."
And both clearly mention the 'string' field of a boot module,
which is to be used by the operating system, not boot loader:
"The ‘string’ field provides an arbitrary string to be
associated with that particular boot module ...
its exact use is specific to the operating system."
Links:
[1] https://www.gnu.org/software/grub/manual/multiboot/multiboot.html
3.3 Boot information format
[2] https://www.gnu.org/software/grub/manual/multiboot2/multiboot.html
3.6.6 Modules
Fixes: e86f6aafb8de (grub-mkconfig/20_linux_xen: Support multiple early initrd images)
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Because grub_util_mkdir() is implemented to not return a value on any
platform, grub_instal_mkdir_p() can test for success by confirming that
the directory requested exists after attempting to create it, otherwise
it should fail with an error and exit.
While fixing this, a flaw in the logic was shown, where the first match
of the path separator, which almost always was the first character in
the path (e.g. /boot/grub2) would result in creating a directory with an
empty name (i.e. ""). To avoid that, it should skip the handling of the
path separator where p is pointing to the first character.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
With gsub substitutions the offsets should be validated against the
number of glyphs in a font face and the memory allocated for the gsub
substitution data.
Both the number of glyphs and the last address in the allocated data are
passed in to process_cursive(), where the number of glyphs validates the end
of the range.
Enabling memory allocation validation uses two macros, one to simply check the
address against the allocated space, and the other to check that the number of
items of a given size doesn't extend outside of the allocated space.
Fixes: CID 73770
Fixes: CID 314040
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are no users left of version_find_latest(), version_test_gt(), and
version_test_numeric(). Remove those unused helper functions. Using
those helper functions is what caused the quadratic sorting performance
issues in the first place, so removing them is a net win.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The current implementation of the 10_kfreebsd script implements its menu
items sorting in bash with a quadratic algorithm, calling "sed", "sort",
"head", and "grep" to compare versions between individual lines, which
is annoyingly slow for kernel developers who can easily end up with
50-100 kernels in their boot partition.
This fix is ported from the 10_linux script, which has a similar
quadratic code pattern.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: debian-bsd@lists.debian.org
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The current implementation of the 10_hurd script implements its menu
items sorting in bash with a quadratic algorithm, calling "sed", "sort",
"head", and "grep" to compare versions between individual lines, which
is annoyingly slow for kernel developers who can easily end up with
50-100 kernels in their boot partition.
This fix is ported from the 10_linux script, which has a similar
quadratic code pattern.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The current implementation of the 20_linux_xen script implements its
menu items sorting in bash with a quadratic algorithm, calling "sed",
"sort", "head", and "grep" to compare versions between individual lines,
which is annoyingly slow for kernel developers who can easily end up
with 50-100 kernels in their boot partition.
This fix is ported from the 10_linux script, which has a similar
quadratic code pattern.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: xen-devel@lists.xenproject.org
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The current implementation of the 10_linux script implements its menu
items sorting in bash with a quadratic algorithm, calling "sed", "sort",
"head", and "grep" to compare versions between individual lines, which
is annoyingly slow for kernel developers who can easily end up with
50-100 kernels in /boot.
As an example, on a Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, running:
/usr/sbin/grub-mkconfig > /dev/null
With 44 kernels in /boot, this command takes 10-15 seconds to complete.
After this fix, the same command runs in 5 seconds.
With 116 kernels in /boot, this command takes 40 seconds to complete.
After this fix, the same command runs in 8 seconds.
For reference, the quadratic algorithm here is:
while [ "x$list" != "x" ] ; do <--- outer loop
linux=`version_find_latest $list`
version_find_latest()
for i in "$@" ; do <--- inner loop
version_test_gt()
fork+exec sed
version_test_numeric()
version_sort
fork+exec sort
fork+exec head -n 1
fork+exec grep
list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
tr
fgrep
tr
So all commands executed under version_test_gt() are executed
O(n^2) times where n is the number of kernel images in /boot.
Here is the improved algorithm proposed:
- Prepare a list with all the relevant information for ordering by a single
sort(1) execution. This is done by renaming ".old" suffixes by " 1" and
by suffixing all other files with " 2", thus making sure the ".old" entries
will follow the non-old entries in reverse-sorted-order.
- Call version_reverse_sort on the list (sort -r -V): A single execution of
sort(1). For instance, GNU coreutils' sort will reverse-sort the list in
O(n*log(n)) with a merge sort.
- Replace the " 1" suffixes by ".old", and remove the " 2" suffixes.
- Iterate on the reverse-sorted list to output each menu entry item.
Therefore, the algorithm proposed has O(n*log(n)) complexity with GNU
coreutils' sort compared to the prior O(n^2) complexity. Moreover, the
constant time required for each list entry is much less because sorting
is done within a single execution of sort(1) rather than requiring
O(n^2) executions of sed(1), sort(1), head(1), and grep(1) in
sub-shells.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In util/grub-module-verifierXX.c, the function get_shdr() is used to obtain the
section header at a given index but isn't checking that there is an offset for
the section header table. To validate that there is, we can check that e_shoff
isn't 0.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
When using userland drivers such as rumpdisk, we'd rather make ext2fs use
parted-based libstore partitioning support. That can be used for kernelland
drivers as well, so we can just make GRUB always use the "part:" qualifier
to switch ext2fs to it.
grub_util_find_hurd_root_device() then has to understand this syntax and
translate it into the /dev/ entry name.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add detection for initramfs of the form *.img.old. For example, Gentoo's
sys-kernel/genkernel installs it as initramfs-*.img and moves any existing
one to initramfs-*.img.old.
Apply the same scheme to initrd-*.img and initrd-*.gz files for consistency.
Signed-off-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A recent fix that made appears to have broken the ability to create an
aarch64 boot image on a x86-based host.
This was due to an overzealous testing of the architecture when building
grub-mkimage and removing the code that build an ARM image when not built
on ARM.
On the occasion remove redundant break.
Fixes: 8541f319 (grub-mkimage: Only check aarch64 relocations when built for aarch64)
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Tested-by: Selva Ganesan <selvaganesan89@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Although the EFI specification enforces support for FAT ESP, it's free
for EFI implementations to implement support for ESPs with other formats
(e.g. ext4, ntfs, etc), and at least U-Boot EFI will support ext4 ESP if
U-Boot is built with ext4 support. In some situations a GRUB installation
on such a non-FAT ESP could be useful (e.g. a NTFS-based USB disk that
can dual boot a Windows installation media and a Linux LiveCD).
As this is advanced and implementation-dependent behavior, let grub-install
allow this kind of installation, but only when --force is specified.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The warning is real as long as dangling pointer to tmp_ may be used if
o32 and o64 are both NULL. However that is not going to happen and can
be ignored safely because the PE_OHDR is being used in a context that
either o32 or o64 must have been properly initialized. Sadly compiler
seems not to always optimize that unused tmp_ away so explicit
suppression remain needed here.
../util/mkimage.c: In function 'grub_install_generate_image':
../util/mkimage.c:1422:41: error: dangling pointer to 'tmp_' may be used [-Werror=dangling-pointer=]
1422 | PE_OHDR (o32, o64, header_size) = grub_host_to_target32 (header_size);
../util/mkimage.c:857:28: note: 'tmp_' declared here
857 | __typeof__((o64)->field) tmp_; \
| ^~~~
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Coverity flagged the switch checks for R_AARCH64_* as being logically
dead code, since it could never happen on x86 due to the masking of the
values earlier in the code.
A check for building on __arm__ (which gcc and clang define) and for
MKIMAGE_ELF64 (which GRUB defines) has been added to avoid this dead
code being built in.
Fixes: CID 158599
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The libfuse 3.0.0 got released in 2016, with some API changes compared to 2.x.
This commit introduces support for 3.x while keeping it compatible with 2.6
as a fallback still.
To detect fuse3, switch configure over to use pkg-config, which is simpler yet
more reliable than looking for library and header manually. Also set
FUSE_USE_VERSION that way, as it depends on the used libfuse version.
Now that the CFLAGS are read from pkg-config, use just <fuse.h>, which works
with 2.x as well as 3.x and is recommended by libfuse upstream.
One behavior change of libfuse3 is that FUSE_ATOMIC_O_TRUNC is set by default,
which means that open with O_TRUNC is passed as-is instead of calling the
truncate operation. With libfuse2, truncate failed with -ENOSYS and that was
returned to the application. To make O_TRUNC fail with libfuse3, return -EROFS
explicitly if writing was requested.
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
os-prober now effectively handles multiple paths passed to initrd, but
grub-mkconfig still truncates off any subsequent space-delimited paths.
Support proper parsing of space-delimited initrd paths passed from
os-prober for distributions, like Manjaro, that require it.
Fixes: https://savannah.gnu.org/bugs/?47681
Signed-off-by: Peter Levine <plevine457@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds pci-arbiter and rumpdisk as bootstrap modules whenever they are
available. This opens the path for fully-userland disk support.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-module-verifierXX.c, the function find_section() uses the value from
grub_target_to_host16 (e->e_shstrndx) to obtain the section header table index
of the section name string table, but it wasn't being checked if the value was
there.
According to the elf(5) manual page,
"If the index of section name string table section is larger than or equal
to SHN_LORESERVE (0xff00), this member holds SHN_XINDEX (0xffff) and the real
index of the section name string table section is held in the sh_link member of
the initial entry in section header table. Otherwise, the sh_link member of the
initial entry in section header table contains the value zero."
Since this check wasn't being made, the function get_shstrndx() is being added
to make this check and use e_shstrndx if it doesn't have SHN_XINDEX as a value,
else use sh_link. We also need to make sure e_shstrndx isn't greater than or
equal to SHN_LORESERVE and sh_link isn't less than SHN_LORESERVE.
Note that it may look as though the argument *arch isn't being used, it's
actually required in order to use the macros grub_target_to_host*(x) which are
unwinded to grub_target_to_host*_real(arch, (x)) based on defines earlier in
the file.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-module-verifierXX.c, grub_target_to_host16 (e->e_shnum) is used to
obtain the number of section header table entries, but it wasn't being
checked if the value was there.
According to the elf(5) manual page,
"If the number of entries in the section header table is larger than or equal
to SHN_LORESERVE (0xff00), e_shnum holds the value zero and the real number of
entries in the section header table is held in the sh_size member of the intial
entry in section header table. Otherwise, the sh_size member of the initial
entry in the section header table holds the value zero."
Since this check wasn't being made, the function get_shnum() is being added to
make this check and use whichever member doesn't have a value of zero. If both
are zero, then we must return an error. We also need to make sure that e_shnum
doesn't have a value greater than or equal to SHN_LORESERVE and sh_size isn't
less than SHN_LORESERVE.
Note that it may look as though the argument *arch isn't being used, it's
actually required in order to use the macros grub_target_to_host*(x) which are
unwinded to grub_target_to_host*_real(arch, (x)) based on defines earlier in
the file.
Fixes: CID 314021
Fixes: CID 314027
Fixes: CID 314033
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Added the function get_shdr() which returns the section header at a given index
parameter passed into this function. This helps traverse the section header
table and reduces repeated calls to lengthy equations used to obtain section
headers.
Note that it may look as though the argument *arch isn't being used, it's
actually required in order to use the macros grub_target_to_host*(x) which are
unwinded to grub_target_to_host*_real(arch, (x)) based on defines earlier in the
file.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The code reads each line into a buffer of size 1024 and does not check if
the line is longer. So a line longer than 1024 will be read as a valid line
followed by an invalid line. Then an error confusing to the user is sent
with the test "invalid line format". But the line format is perfectly fine,
the problem is in GRUB's parser. Check if we've hit a line longer than the
size of the buffer, and if so send a more correct and reasonable error.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If the last non-NULL byte of "buf" is not a white-space character (such as
when a read line is longer than the size of "buf"), then "p" will eventually
point to the byte after the last byte in "buf". After which "p" will be
dereferenced in the while conditional leading to an out of bounds read. Make
sure that "p" is inside "buf" before dereferencing it.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit ab2e53c8a (grub-mkconfig: Honor a symlink when generating
configuration by grub-mkconfig) has inadvertently discarded umask for
creating grub.cfg in the process of running grub-mkconfig. The resulting
wrong permission (0644) would allow unprivileged users to read GRUB
configuration file content. This presents a low confidentiality risk
as grub.cfg may contain non-secured plain-text passwords.
This patch restores the missing umask and sets the creation file mode
to 0600 preventing unprivileged access.
Fixes: CVE-2021-3981
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The POSIX locale is default or native operating system's locale
identical to the C locale, so no translation to human speaking languages
are provided. For this reason we should filter out LANG=POSIX as well as
LANG=C upon generating grub.cfg to avoid looking up for it's gettext's
message catalogs that will consequently result in an unpleasant message:
error: file `/boot/grub/locale/POSIX.gmo' not found
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function write_font_pf2() memory is allocated for font_name to
construct a new name, but it is not released before returning from the
function, leaking the allocated memory.
Fixes: CID 314015
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function cmd_cmp() within the while loop, srcnew and destnew are
being allocated but are never freed either before leaving scope or in
the recursive calls being made to cmd_cmp().
Fixes: CID 314032
Fixes: CID 314045
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function write_part(), the value of inname is not used beyond
the grub_util_fopen() call, so it should be freed to avoid leakage.
Fixes: CID 314028
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The copy_all() function skips a section of code using continue, but
fails to free the memory in srcf first, leaking it.
Fixes: CID 314026
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When generating grub.cfg using grub-mkconfig and the scripts 10_linux and
20_linux_xen there is no way to add kernel command line parameters _only_ to
the recovery entries generated.
This is needed to e.g. start a debug shell in installations using systemd
using the kernel command line parameter "systemd.debug-shell" or to recover
in a system with encrypted root in situations where the decryption of the
root filesystem per crypttab in the intiramfs image is broken and the recovery
entry should contain information how to decrypt the rootfs (cryptopts=).
This patch does not change the default behaviour of the GRUB if
GRUB_CMDLINE_LINUX_RECOVERY is not set.
If GRUB_CMDLINE_LINUX_RECOVERY is set and the generated recovery entry should
include the kernel parameter "single" the parameter must be explicitly included
in GRUB_CMDLINE_LINUX_RECOVERY.
As far as I know all credits for the idea and the initial implementation go to
Kyle Ranking of Purism.
Signed-off-by: Kyle Rankin <kyle.rankin@puri.sm>
Signed-off-by: Chris Vogel <chris@z9.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Refactor clean_grub_dir() to create a backup of all the files, instead
of just irrevocably removing them as the first action. If available,
register atexit() handler to restore the backup if errors occur before
point of no return, or remove the backup if everything was successful.
If atexit() is not available, the backup remains on disk for manual
recovery.
Some platforms defined a point of no return, i.e. after modules & core
images were updated. Failures from any commands after that stage are
ignored, and backup is cleaned up. For example, on EFI platforms update
is not reverted when efibootmgr fails.
Extra care is taken to ensure atexit() handler is only invoked by the
parent process and not any children forks. Some older GRUB codebases
can invoke parent atexit() hooks from forks, which can mess up the
backup.
This allows safer upgrades of MBR & modules, such that
modules/images/fonts/translations are consistent with MBR in case of
errors. For example accidental grub-install /dev/non-existent-disk
currently clobbers and upgrades modules in /boot/grub, despite not
actually updating any MBR.
This patch only handles backup and restore of files copied to /boot/grub.
This patch does not perform backup (or restoration) of MBR itself or
blocklists. Thus when installing i386-pc platform, corruption may still
occur with MBR and blocklists which will not be attempted to be
automatically recovered.
Also add modinfo.sh and *.efi to the cleanup/backup/restore code path,
to ensure it is also cleaned, backed up and restored.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit f60ba9e5945 (util/mkimage: Refactor section setup to use a helper)
added a helper function to setup PE sections. But it also changed how the
raw data offsets were calculated since all the section sizes are aligned.
However, for some platforms, i.e ia64-efi and arm64-efi, the kernel image
size is not aligned using the section alignment. This leads to the situation
in which the mods section offset in its PE section header does not match its
real placement in the PE file. So, finally the GRUB is not able to locate
and load built-in modules.
The problem surfaces on ia64-efi and arm64-efi because both platforms
require additional relocation data which is added behind .bss section.
So, we have to add some padding behind this extra data to make the
beginning of mods section properly aligned in the PE file. Fix it by
aligning the kernel_size to the section alignment. That makes the sizes
and offsets in the PE section headers to match relevant sections in the
PE32+ binary file.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Since the possessive form of "it" is being used, the apostrophe must be omitted.
Signed-off-by: Aru Sahni <aru@arusahni.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
