If search target is less than all entries in font->index then "hi"
variable is set to -1, which translates to SIZE_MAX and leads to errors.
This patch fixes the problem by replacing the entire binary search code
with the libstdc++'s std::lower_bound() implementation.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The BMP index (font->bmp_idx) is designed as a reverse lookup table of
char entries (font->char_index), in order to speed up lookups for BMP
chars (i.e. code < 0x10000). The values in BMP index are the subscripts
of the corresponding char entries, stored in grub_uint16_t, while 0xffff
means not found.
This patch fixes the problem of large subscript truncated to grub_uint16_t,
leading BMP index to return wrong char entry or report false miss. The
code now checks for bounds and uses BMP index as a hint, and fallbacks
to binary-search if necessary.
On the occasion add a comment about BMP index is initialized to 0xffff.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In fact it can't overflow at all because glyph_id->ncomb is only 8-bit
wide. But let's keep safe if somebody changes the width of glyph_id->ncomb
in the future. This patch also fixes the inconsistency between
render_max_comb_glyphs and render_combining_glyphs when grub_malloc()
returns NULL.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Remove grub_font_dup_glyph() since nobody is using it since 2013, and
I'm too lazy to fix the integer overflow problem in it.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch fixes several integer overflows in grub_font_construct_glyph().
Glyphs of invalid size, zero or leading to an overflow, are rejected.
The inconsistency between "glyph" and "max_glyph_size" when grub_malloc()
returns NULL is fixed too.
Fixes: CVE-2022-2601
Reported-by: Zhang Boyang <zhangboyang.id@gmail.com>
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The length of memory allocation and file read may overflow. This patch
fixes the problem by using safemath macros.
There is a lot of code repetition like "(x * y + 7) / 8". It is unsafe
if overflow happens. This patch introduces grub_video_bitmap_calc_1bpp_bufsz().
It is safe replacement for such code. It has safemath-like prototype.
This patch also introduces grub_cast(value, pointer), it casts value to
typeof(*pointer) then store the value to *pointer. It returns true when
overflow occurs or false if there is no overflow. The semantics of arguments
and return value are designed to be consistent with other safemath macros.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Check glyph's width and height against limits specified in font's
metadata. Reject the glyph (and font) if such limits are exceeded.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit eb33e61b3 (multiboot: fix memory leak) did not fix all
issues. Fix all of them right now.
Fixes: eb33e61b3 (multiboot: fix memory leak)
Signed-off-by: t.feng <fengtao40@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
zpool status by default prints basenames of VDEVs, which means that GRUB
would have to go around guessing to see whether a VDEV exists. Instead,
it'd be more robust to simply tell zpool to give us full paths to VDEVs
via -P.
Signed-off-by: Arsen Arsenović <arsen@aarsen.me>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is not an ideal solution, as interactive users must always run
a command in order to get the behavior they want, but it avoids
problematic interactions between prompting and sourcing files.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Currently if an EFI firmware fails to do a TPM measurement for a file,
the error will be propagated to the verifiers framework which will
prevent it to be opened. This mean that buggy firmwares will lead to
the system not booting because files won't be allowed to be loaded. But
a failure to do a TPM measurement isn't expected to be a fatal error
that causes the system to be unbootable.
To avoid this, don't return errors from .write and .verify_string
callbacks and just print a debug message in the case of a TPM
measurement failure. Add an environment variable, tpm_fail_fatal, to
restore the previous behavior.
Also-authored-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add an include on stdbool.h, making the bool type generally available
within the GRUB without needing to add a file-specific include every
time it would be used.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The GRUB emulator is used as a debugging utility but it could also be
used as a user-space bootloader if there is support to boot an operating
system.
The Linux kernel is already able to (re)boot another kernel via the
kexec boot mechanism. So the grub-emu tool could rely on this feature
and have linux and initrd commands that are used to pass a kernel,
initramfs image and command line parameters to kexec for booting
a selected menu entry.
By default the systemctl kexec option is used so systemd can shutdown
all of the running services before doing a reboot using kexec. But if
this is not present, it can fall back to executing the kexec user-space
tool directly. The ability to force a kexec-reboot when systemctl kexec
fails must only be used in controlled environments to avoid possible
filesystem corruption and data loss.
Signed-off-by: Raymund Will <rw@suse.com>
Signed-off-by: John Jolly <jjolly@suse.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A user may wish to use an image that is not sorted as the "latest"
version as the top-level entry. For example, in Arch Linux, if a user
has the LTS and regular kernels installed, "/boot/vmlinuz-linux-lts"
gets sorted as the "latest" compared to "/boot/vmlinuz-linux", meaning
the LTS kernel becomes the top-level entry. However, a user may wish to
use the regular kernel as the top-level default with the LTS only
existing as a backup.
This need can be seen in Arch Linux's AUR with two user-submitted
packages[0][1] providing an update hook which patches /etc/grub.d/10_linux
to move the desired kernel to the top-level. This patch serves to solve
this in a more generic way.
Introduce the GRUB_TOP_LEVEL, GRUB_TOP_LEVEL_XEN and GRUB_TOP_LEVEL_OS_PROBER
variables to allow users to specify the top-level entry.
Create grub_move_to_front() as a helper function which moves entries to
the front of a list. This function does the heavy lifting of moving
the menu entry to the front in each script.
In 10_netbsd, since there isn't an explicit list variable, extract the
items that are being iterated through into a list so that we can
optionally apply grub_move_to_front() to the list before the loop.
[0]: https://aur.archlinux.org/packages/grub-linux-default-hook
[1]: https://aur.archlinux.org/packages/grub-linux-rt-default-hook
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Reviewed-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/video/readers/jpeg.c, the height and width of a JPEG image don't
have an upper limit for how big the JPEG image can be. In Coverity, this is
getting flagged as an untrusted loop bound. This issue can also seen in PNG and
TGA format images as well but Coverity isn't flagging it. To prevent this, the
constant IMAGE_HW_MAX_PX is being added to include/grub/bitmap.h, which has
a value of 16384, to act as an artificial limit and restrict the height and
width of images. This value was picked as it is double the current max
resolution size, which is 8K.
Fixes: CID 292450
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is "belt and braces" with commit 12e20a6a695f (disk/diskfilter:
Check calloc() result for NULL): we end up trying to use too much memory
in situations like corrupted Linux software RAID setups purporting to
use a huge number of disks. Simply refuse to permit such configurations.
1024 is a bit arbitrary, yes, and I feel a bit like I'm tempting fate
here, but I think 1024 disks in an array (that GRUB has to read to boot!)
should be enough for anyone.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that we implemented support for the LoadFile2 protocol for initrd
loading, there is no longer a need to pass the initrd parameters via
the device tree. This means that when the LoadFile2 protocol is being
used, there is no reason to update the device tree in the first place,
and so we can ignore it entirely.
The only remaining reason to deal with the devicetree is if we are
using the "devicetree" command to load one from disk, so tweak the
logic in grub_fdt_install() to take that into account.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recent Linux kernels will invoke the LoadFile2 protocol installed on
a well-known vendor media path to load the initrd if it is exposed by
the firmware. Using this method is preferred for two reasons:
- the Linux kernel is in charge of allocating the memory, and so it can
implement any placement policy it wants (given that these tend to
change between kernel versions),
- it is no longer necessary to modify the device tree provided by the
firmware.
So let's install this protocol when handling the "initrd" command if
such a recent kernel was detected (based on the PE/COFF image version),
and defer loading the initrd contents until the point where the kernel
invokes the LoadFile2 protocol.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When GRUB runs on top of EFI firmware, it only has access to block and
network device abstractions exposed by the firmware, and it is up to the
firmware to quiesce the underlying hardware when exiting boot services
and handing over to the OS.
This is especially important for network devices, to prevent incoming
packets from being DMA'd straight into memory after the OS has taken
over but before it has managed to reconfigure the network hardware.
GRUB handles this by means of the grub_net_fini_hw() preboot hook, which
is executed before calling into the booted image. This means that all
network devices disappear or become inoperable before the EFI stub
executes on EFI targeted builds. This is problematic as it prevents the
EFI stub from calling back into GRUB provided protocols such as
LoadFile2 for the initrd, which we will provide in a subsequent patch.
So add a flag that indicates to the network core that EFI network
devices should not be closed when grub_net_fini_hw() is called.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The way we load the Linux and PE/COFF image headers depends on a fixed
placement of the COFF header at offset 0x40 into the file. This is
a reasonable default, given that this is where Linux emits it today.
However, in order to comply with the PE/COFF spec, which allows this
header to appear anywhere in the file, let's ensure that we read the
header from where it actually appears in the file if it is not located
at offset 0x40.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Xen has its own version of the image header, to account for the
additional PE/COFF header fields. Since we are adding references to
those in the shared EFI loader code, update the common definitions
and drop the Xen specific one which no longer has a purpose.
Since in both cases, the call to grub_arch_efi_linux_check_image() is
preceded by a load of the image header, let's move the load into that
function, and rename it to grub_arch_efi_linux_load_image_header().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The PE/COFF spec permits the COFF signature and file header to appear
anywhere in the file, and the actual offset is recorded in 4 byte
little endian field at offset 0x3c of the image.
When GRUB is emitted as a PE/COFF binary, we reuse the 128 byte MS-DOS
stub (even for non-x86 architectures), putting the COFF signature and
file header at offset 0x80. However, other PE/COFF images may use
different values, and non-x86 Linux kernels use an offset of 0x40
instead.
So let's get rid of the grub_pe32_header struct from pe32.h, given that
it does not represent anything defined by the PE/COFF spec. Instead,
introduce a minimal struct grub_msdos_image_header type based on the
PE/COFF spec's description of the image header, and use the offset
recorded at file position 0x3c to discover the actual location of the PE
signature and the COFF image header.
The remaining fields are moved into a struct grub_pe_image_header,
which we will use later to access COFF header fields of arbitrary
images (and which may therefore appear at different offsets)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_buffer_free() should handle NULL input pointer, similar to
grub_free(). If the pointer is not referencing any memory location,
grub_buffer_free() need not perform any function.
Fixes: CID 396931
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The dnode_get_path() traverses dnode structures to locate the dnode leaf
of a given path. When the leaf is a symlink to another path, it restarts
the traversal either from root or from a different path. In such cases,
dn_new must be re-initialized
Passes "make check".
Fixes: CID 86750
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
After doing some validation with clang from versions 3.8 and up, the
builds prior to version 8.0.0 fail due to the use of safemath functions
at link time.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Building the current code with clang and the latest gnulib fails due to
the use of a variable-length-array (vla) warning, which turns in to an
error due to the presence of the -Werror during the build.
The gnulib team stated that their code should not be built with -Werror.
At present, the only way to do this is for the complete code-base, by
using the --disable-werror option to configure.
Rather than doing this, and failing to gain any benefit that it provides,
instead, if building with clang, this patch makes it possible to specifically
not error on vlas, while retaining the -Werror functionality otherwise.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The recent gnulib updates require an implementation of abort(), but the
current macro provided by changeset:
cd37d3d3916c gnulib: Drop no-abort.patch
to config.h.in does not work with the clang compiler since it doesn't
provide a __builtin_trap() implementation, so this element of the
changeset needs to be reverted, and replaced.
After some discussion with Vladimir 'phcoder' Serbinenko and Daniel Kiper
it was suggested to bring back in the change from the changeset:
db7337a3d353 * grub-core/gnulib/regcomp.c (regerror): ...
Which implements abort() as an inline call to grub_abort(), but since
that was made static by changeset:
a8f15bceeafe * grub-core/kern/misc.c (grub_abort): Make static
it is also necessary to revert the specific part that makes it a static
function too.
Another implementation of abort() was found in grub-core/kern/compiler-rt.c
which needs to also be removed to be consistent.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_cryptodisk_endecrypt(), a for loop is incrementing the
variable i by (1U << log_sector_size). The variable i is of type grub_size_t
which is a 64-bit unsigned integer on x86_64 architecture. On the other hand, 1U
is a 32-bit unsigned integer. By performing a left shift on a 32-bit value and
assigning it to a 64-bit variable, the 64-bit variable may have incorrect values
in the high 32-bits if the shift has an overflow. To avoid this, we replace 1U
with (grub_size_t)1.
Fixes: CID 307788
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Every heap grow will cause all disk caches invalidated which decreases
performance severely. This patch moves disk cache invalidation code to
the last of memory squeezing measures. So, disk caches are released only
when there are no other ways to get free memory.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
For printf()/fprintf() functions, unsigned integers should use %u as the
valid conversion specifier instead of %d.
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The stack check logs a console message on failure, and the EFI API expects
a NULL terminated UCS-2 string. In order to define a UCS-2 string literal,
kernel.img on amd64 and i386 EFI targets is built with -fshort-wchar.
Also compile kernel.img on other EFI targets with -fshort-wchar.
Fixes: 37ddd94 (kern/efi/init: Log a console error during a stack check failure)
Reported-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is useful on cloud instances with remote serial ports as it can be
difficult to connect "fast enough" to get the initial menu display
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The point of no return is used to define a point where no change should
be reverted in a wake of fatal error that consequently aborts the
process. The powerpc-ieee1275 install apparently missed this point of no
return definition that newly installed modules could be inadvertently
reverted after successful image embedding so that boot failure is
incurred due to inconsistent state.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
With wildly corrupt inputs, we can end up trying to calloc a very
large amount of memory, which will fail and give us a NULL pointer.
We need to check that to avoid a crash. (And, even if we blocked
such inputs, it is good practice to check the results of allocations
anyway.)
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A user can now specify UUID strings with dashes, instead of having to remove
dashes. This is backwards-compatibility preserving and also fixes a source
of user confusion over the inconsistency with how UUIDs are specified
between file system UUIDs and cryptomount UUIDs. Since cryptsetup, the
reference implementation for LUKS, displays and generates UUIDs with dashes
there has been additional confusion when using the UUID strings from
cryptsetup as exact input into GRUB does not find the expected cryptodisk.
A new function grub_uuidcasecmp() is added that is general enough to be used
other places where UUIDs are being compared.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Variable values may contain spaces at the end or newlines. However, when
displayed without quotes this is not obvious and can lead to confusion as
to the actual contents of variables. Also for some variables grub_env_get()
returns a NULL pointer instead of a pointer to an empty string and
previously would be printed as "var=(null)". Now such variables will be
displayed as "var=''".
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This adds acpi as bootstrap module whenever it is available. This opens the
path for proper IRQ routing for fully-userland disk drivers.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allow treating util/grub-module-verifierXX.c as a file you can build
directly so syntax checkers like vim's "syntastic" plugin, which uses
"gcc -x c -fsyntax-only" to build it, will work.
One still has to do whatever setup is required to make it pick the
right include dirs, which -I options we use, etc., but this makes
it so you can do the checking on the file you're editing, rather
than on a different file.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fix the incorrect return value of __clzsi2() function.
Fixes: e795b90 (RISC-V: Add libgcc helpers for clz)
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We have multiple reports of things being slower with a 1 MiB initial static
allocation, and a report (more difficult to nail down) of a boot failure
as a result of the smaller initial allocation.
Make the initial memory allocation 32 MiB.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In addition to C locale there is also C.UTF-8 locale now. Filter that as
well, by using ${grub_lang}, which contains a stripped value.
This fixes the following message and resulting boot failure:
error: file `/boot/grub/locale/C.gmo' not found.
Signed-off-by: Christian Hesse <mail@eworm.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In some filesystem utils like mksquashfs, they will silently change
behaviour and cause timestamps to unexpectedly change. Build
environments like Debian's set SOURCE_DATE_EPOCH in the environment,
so remove it. Reproducible builds are good and useful for shipped
artifacts, but this causes build-time tests to fail.
Signed-off-by: Steve McIntyre <steve@einval.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI_CONFORMANCE_PROFILES_TABLE_GUID is used for a table of GUIDs for conformance
profiles (cf. UEFI specification 2.10, 4.6.5 EFI_CONFORMANCE_PROFILE_TABLE).
The lsefisystab command is used to display installed EFI configuration tables.
Currently it only shows the GUID but not a short text for the table.
Provide a short text for the EFI_CONFORMANCE_PROFILES_TABLE_GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recently, ext4 added the large_dir feature, which adds support for
a 3 level htree directory support.
The GRUB supports existing file systems with htree directories by
ignoring their existence, and since the index nodes for the hash tree
look like deleted directory entries (by design), the GRUB can simply do
a brute force O(n) linear search of directories. The same is true for
3 level deep htrees indicated by large_dir feature flag.
Hence, it is safe for the GRUB to ignore the large_dir incompat feature.
Fixes: https://savannah.gnu.org/bugs/?61606
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A new option is added to the loopback command, -D or --decompress, which
when specified transparently decompresses the backing file. This allows
compressed images to be used as if they were uncompressed.
Add documentation to support this change.
Suggested-by: Li Gen <ligenlive@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The list of targets that support PCI is in gentpl.py. However, there is no
support for generating makefile script from a .def file that will apply
globally to the makefile, but on a per target basis. So instead, use
gentpl.py in configure to get the list of targets and check if the current
build target is one of them. If it is, set the automake conditional
COND_HAVE_PCI. Then in conf/Makefile.common add -DGRUB_HAS_PCI for the
platform if COND_HAVE_PCI is true.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Store returned value from grub_getkey() in int instead of char to
prevent throwing away the extended bits. This was a problem because,
for instance, the left arrow key press would return
(GRUB_TERM_EXTENDED | 0x4b), which would have the GRUB_TERM_EXTENDED
thrown away leaving 0x4b or 'K'. These extended keys should either
work as intended or do nothing. This change has them do nothing,
instead of inserting a key not pressed by the user.
Signed-off-by: Li Gen <ligenlive@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The register_key_notify() method should have an output parameter which is
a pointer to the unique handle assigned to the registered notification.
Signed-off-by: Li Gen <ligenlive@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
